|
From: | Yeo Jin Kuang Alvin (IA) |
Subject: | Re: [Discuss-gnuradio] Rx to tx GNU Radio |
Date: | Mon, 14 May 2018 00:59:48 +0000 |
Hi, I’ve attached the GRC file. I am using USRP B210, I connected the RF cable from tx to a 30 dB attenuator back to the rx and then another RF cable from another
tx to the Spectrum Analyzer. I am using GNU Radio Companion 3.7.9 . Thank you in advanced! From: Brent Stapleton [mailto:address@hidden
Hi Yeo, Could you provide more details? Providing a GRC file would be helpful. What kind of USRP are you using? What physical connections do you have on the device? What
version of GNU Radio are you using? From a high level, you should be able to TX and RX simultaneously without error. Best Regards, Brent On Fri, May 11, 2018 at 1:02 AM, Yeo Jin Kuang Alvin (IA) <address@hidden> wrote: Hi all, I’ve seen some examples and managed to do a tx and rx loopback to file using both C++ and GNU Radio. However, now I would like to receive and transmit the same signal out. I tried
connecting USRP Source block to USRP Sink, and I see lots of “LLLLLL” which is late packets. Anyone has any idea on how to do a receive and transmit the same signal out in real time using GNU Radio Companion? Thank you in advanced!
|
[Prev in Thread] | Current Thread | [Next in Thread] |