discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] USRP N200 issues and fault troubleshooting


From: Ayaz Mahmud
Subject: [Discuss-gnuradio] USRP N200 issues and fault troubleshooting
Date: Thu, 2 Aug 2018 17:44:37 +0000

Hello,

 

  1. “uhd_usrp_probe” (attached) gives the attached output, where I see the Antennas & Sensors field are showing blank. Is this normal (N200) ? Because for other devices I am using like B210 it shows the Antenna names.

 

  1. For testing purpose if I run the below command which gives error in antenna naming. But if I skip the (-A RX2) it runs without any error.

 

“uhd_fft –args “addr=192.168.10.2” -A RX2 -s 10e6 -g 10 -f 100e6”

 

Traceback (most recent call last):

  File "/usr/local/bin/uhd_fft", line 448, in <module>

    main()

  File "/usr/local/bin/uhd_fft", line 431, in main

    tb = uhd_fft(args)

  File "/usr/local/bin/uhd_fft", line 128, in __init__

    self.setup_usrp(uhd.usrp_source, args)

  File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_app.py", line 156, in setup_usrp

    self.vprint("[ERROR] {} is not a valid antenna name for this USRP device!".format(ant))

NameError: global name 'ant' is not defined

 

  1. To make sure if the receiver is working or not, I have designed a flow graph for fm radio. I can get a clear signal in my B210 device, but at the same configuration it just noise in N200.

 

What should be my next step to troubleshoot ? Or how can I be sure that it is a faulty device?

 

Thanks

Ayaz

 

Attachment: uhd_usrp_probe_N200
Description: uhd_usrp_probe_N200


reply via email to

[Prev in Thread] Current Thread [Next in Thread]