discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Error compiling gnuradio v3.7.9


From: Michael Dickens
Subject: Re: [Discuss-gnuradio] Error compiling gnuradio v3.7.9
Date: Thu, 04 Apr 2019 09:41:09 -0400
User-agent: Cyrus-JMAP/3.1.6-329-gf4aae99-fmstable-20190329v1

Hi Ivan - PLEASE next time use < pastebin.com > or Google Drive or DropBox or whatever to hold your files & then post a link here; doing so requires less bandwidth && is -much- easier for us to parse.

It looks like "Volk" didn't configure correctly ... what version of Debian are you building on? Which version of CMake is installed?

Hope this is useful! - MLD

On Wed, Apr 3, 2019, at 7:11 PM, address@hidden wrote:
Hi guys!
I'm Ivan, researcher at Italian Aerospace Research Centre. I'm working on algorithms for optimizing aerospace communications based on SDR paradigm.
I will use an USRP E310, first in "network mode" for rapid troubleshooting of the algorithms. I correctly built the uhd drivers enabling the network mode using this procedure:
https://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_uhd_build
Now I want to build gnuradio v3.7.9 on my linux machine (with Debian installed) to have the same version actually embedded on the E310, using this procedure:
https://wiki.gnuradio.org/index.php/BuildGuide
The problem is that when I run cmake, it exits with errors.
I will report below the output of cmake and the error logs.
address@hidden:~/workarea-gnuradio/gnuradio/build$ cmake -Wno-dev ../
-- The CXX compiler identification is GNU 6.3.0
-- The C compiler identification is GNU 6.3.0
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type not specified: defaulting to release.
-- Build type set to Release.
-- Found Git: /usr/bin/git  
-- Extracting version information from git describe...
-- Performing Test HAVE_VISIBILITY_HIDDEN
-- Performing Test HAVE_VISIBILITY_HIDDEN - Success
-- Performing Test HAVE_WARN_SIGN_COMPARE
-- Performing Test HAVE_WARN_SIGN_COMPARE - Success
-- Performing Test HAVE_WARN_ALL
-- Performing Test HAVE_WARN_ALL - Success
-- Performing Test HAVE_WARN_NO_UNINITIALIZED
-- Performing Test HAVE_WARN_NO_UNINITIALIZED - Success
-- Compiler Version: cc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-- Compiler Flags: /usr/bin/cc:::-O3 -DNDEBUG  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized
/usr/bin/c++:::-O3 -DNDEBUG  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized
-- ADDING PERF COUNTERS
-- Building Static Libraries: OFF
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE  
-- Boost version: 1.62.0
-- Found the following Boost libraries:
--   date_time
--   program_options
--   filesystem
--   system
--   thread
--   chrono
--   atomic
-- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython2.7.so (found suitable version "2.7.13", minimum required is "2")
--
-- Checking for module SWIG
-- Found SWIG version 3.0.10.
-- Found SWIG: /usr/bin/swig3.0  
--
-- The build system will automatically enable all components.
-- Use -DENABLE_DEFAULT=OFF to disable components by default.
--
-- Configuring python-support support...
--   Dependency PYTHONLIBS_FOUND = TRUE
--   Dependency SWIG_FOUND = TRUE
--   Dependency SWIG_VERSION_CHECK = TRUE
--   Enabling python-support support.
--   Override with -DENABLE_PYTHON=ON/OFF
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29")
-- Checking for module 'cppunit'
--   Found cppunit, version 1.13.2
-- Found CPPUNIT: /usr/lib/x86_64-linux-gnu/libcppunit.so;dl  
--
-- Configuring testing-support support...
--   Dependency CPPUNIT_FOUND = TRUE
--   Enabling testing-support support.
--   Override with -DENABLE_TESTING=ON/OFF
--
-- Configuring VOLK support...
-- Build type set to Release.
-- Extracting version information from git describe...
-- Found PythonInterp: /usr/bin/python2 (found suitable version "2.7.13", minimum required is "2")
--
-- Python checking for python >= 2.5
-- Python checking for python >= 2.5 - found
--
-- Python checking for Cheetah >= 2.0.0
-- Python checking for Cheetah >= 2.0.0 - found
-- Boost version: 1.62.0
-- Found the following Boost libraries:
--   filesystem
--   system
--   unit_test_framework
--   program_options
-- Checking for module 'orc-0.4 > 0.4.11'
--   Found orc-0.4 > 0.4.11, version 0.4.26
-- Found ORC: /usr/lib/x86_64-linux-gnu/liborc-0.4.so  
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.13")
-- QA Testing is enabled.
--   Modify using: -DENABLE_TESTING=ON/OFF
-- Looking for cpuid.h
-- Looking for cpuid.h - found
-- Looking for intrin.h
-- Looking for intrin.h - not found
-- Looking for fenv.h
-- Looking for fenv.h - found
-- Looking for dlfcn.h
-- Looking for dlfcn.h - found
-- Compiler name: GNU
-- Performing Test HAVE_WERROR_UNUSED_CMD_LINE_ARG
-- Performing Test HAVE_WERROR_UNUSED_CMD_LINE_ARG - Failed
-- Looking for posix_memalign
-- Looking for posix_memalign - found
-- x86* CPU detected
/usr/bin/python2: can't open file '/home/krono/workarea-gnuradio/gnuradio/gen/volk_compile_utils.py': [Errno 2] No such file or directory
-- Check size of void*[8]
-- Check size of void*[8] - done
-- CPU width is 64 bits, Overruled arch 32
CMake Error at volk/lib/CMakeLists.txt:129 (list):
  list sub-command REMOVE_ITEM requires list to be present.
Call Stack (most recent call first):
  volk/lib/CMakeLists.txt:253 (OVERRULE_ARCH)


-- Available architectures:
/usr/bin/python2: can't open file '/home/krono/workarea-gnuradio/gnuradio/gen/volk_compile_utils.py': [Errno 2] No such file or directory
-- Available machines:
-- BUILD TYPE = RELEASE
-- Base cflags = -O3 -DNDEBUG  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall
-- Compiler Version: cc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-- The ASM compiler identification is GNU
-- Found assembler: /usr/bin/cc
-- c flags:  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall;
-- asm flags:
-- Loading version 1.2 into constants...
-- Using install prefix: /usr/local
--
-- Configuring volk support...
--   Enabling volk support.
--   Override with -DENABLE_VOLK=ON/OFF
--   Override with -DENABLE_INTERNAL_VOLK=ON/OFF
-- Found LOG4CPP: /usr/lib/x86_64-linux-gnu/liblog4cpp.so
-- ENABLE_GR_LOG set to ON.
-- HAVE_LOG4CPP set to True.
-- LOG4CPP_LIBRARIES set to /usr/lib/x86_64-linux-gnu/liblog4cpp.so.
-- Found Sphinx: /usr/bin/sphinx-build  
--
-- Configuring doxygen support...
--   Dependency DOXYGEN_FOUND = YES
--   Enabling doxygen support.
--   Override with -DENABLE_DOXYGEN=ON/OFF
--
-- Configuring sphinx support...
--   Dependency SPHINX_FOUND = TRUE
--   Enabling sphinx support.
--   Override with -DENABLE_SPHINX=ON/OFF
-- Looking for C++ include netdb.h
-- Looking for C++ include netdb.h - found
-- Looking for C++ include sys/time.h
-- Looking for C++ include sys/time.h - found
-- Looking for C++ include sys/types.h
-- Looking for C++ include sys/types.h - found
-- Looking for C++ include sys/select.h
-- Looking for C++ include sys/select.h - found
-- Looking for C++ include sys/socket.h
-- Looking for C++ include sys/socket.h - found
-- Looking for C++ include io.h
-- Looking for C++ include io.h - not found
-- Looking for C++ include sys/mman.h
-- Looking for C++ include sys/mman.h - found
-- Looking for C++ include sys/ipc.h
-- Looking for C++ include sys/ipc.h - found
-- Looking for C++ include sys/shm.h
-- Looking for C++ include sys/shm.h - found
-- Looking for C++ include signal.h
-- Looking for C++ include signal.h - found
-- Looking for C++ include netinet/in.h
-- Looking for C++ include netinet/in.h - found
-- Looking for C++ include arpa/inet.h
-- Looking for C++ include arpa/inet.h - found
-- Looking for C++ include byteswap.h
-- Looking for C++ include byteswap.h - found
-- Looking for C++ include linux/ppdev.h
-- Looking for C++ include linux/ppdev.h - found
-- Looking for C++ include dev/ppbus/ppi.h
-- Looking for C++ include dev/ppbus/ppi.h - not found
-- Looking for C++ include unistd.h
-- Looking for C++ include unistd.h - found
-- Looking for C++ include malloc.h
-- Looking for C++ include malloc.h - found
-- Performing Test HAVE_SNPRINTF
-- Performing Test HAVE_SNPRINTF - Success
-- Performing Test HAVE_SIGACTION
-- Performing Test HAVE_SIGACTION - Success
-- Performing Test HAVE_SELECT
-- Performing Test HAVE_SELECT - Success
-- Performing Test HAVE_SYSCONF
-- Performing Test HAVE_SYSCONF - Success
-- Performing Test HAVE_GETPAGESIZE
-- Performing Test HAVE_GETPAGESIZE - Success
-- Performing Test HAVE_SSLEEP
-- Performing Test HAVE_SSLEEP - Failed
-- Performing Test HAVE_NANOSLEEP
-- Performing Test HAVE_NANOSLEEP - Success
-- Performing Test HAVE_GETTIMEOFDAY
-- Performing Test HAVE_GETTIMEOFDAY - Success
-- Performing Test HAVE_VALLOC
-- Performing Test HAVE_VALLOC - Success
-- Performing Test HAVE_PTHREAD_SIGMASK
-- Performing Test HAVE_PTHREAD_SIGMASK - Success
-- Performing Test HAVE_CREATEFILEMAPPING
-- Performing Test HAVE_CREATEFILEMAPPING - Failed
-- Performing Test HAVE_SHM_OPEN
-- Performing Test HAVE_SHM_OPEN - Success
-- Performing Test HAVE_SINCOS
-- Performing Test HAVE_SINCOS - Success
-- Performing Test HAVE_SINCOSF
-- Performing Test HAVE_SINCOSF - Success
-- Performing Test HAVE_SINF
-- Performing Test HAVE_SINF - Success
-- Performing Test HAVE_COSF
-- Performing Test HAVE_COSF - Success
-- Performing Test HAVE_MMAP
-- Performing Test HAVE_MMAP - Success
-- Performing Test HAVE_PTHREAD_SETSCHEDPARAM
-- Performing Test HAVE_PTHREAD_SETSCHEDPARAM - Success
-- Performing Test HAVE_SCHED_SETSCHEDULER
-- Performing Test HAVE_SCHED_SETSCHEDULER - Success
--
-- Configuring gnuradio-runtime support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_VOLK = ON
--   Dependency PYTHONINTERP_FOUND = TRUE
--   Enabling gnuradio-runtime support.
--   Override with -DENABLE_GNURADIO_RUNTIME=ON/OFF
--
-- Configuring gr-ctrlport support...
--   Dependency Boost_FOUND = 1
--   Dependency SWIG_FOUND = TRUE
--   Dependency SWIG_VERSION_CHECK = TRUE
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-ctrlport support.
--   Override with -DENABLE_GR_CTRLPORT=ON/OFF
-- Looking for C++ include sys/resource.h
-- Looking for C++ include sys/resource.h - found
-- Loading build date Wed, 03 Apr 2019 22:43:04 into constants...
-- Loading version 3.7.9 into constants...
-- Checking for module 'thrift'
--   No package 'thrift' found
-- Could not find appropriate version of Thrift: 0.9.1 < 0.9.2
-- Looking for C++ include windows.h
-- Looking for C++ include windows.h - not found
-- TRY_SHM_VMCIRCBUF set to ON.
-- Performing Test HAVE_WNO_UNUSED_BUT_SET_VARIABLE
-- Performing Test HAVE_WNO_UNUSED_BUT_SET_VARIABLE - Success
--
-- Configuring gr-blocks support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-blocks support.
--   Override with -DENABLE_GR_BLOCKS=ON/OFF
--
-- Python checking for python >= 2.5
-- Python checking for python >= 2.5 - found
--
-- Python checking for Cheetah >= 2.0.0
-- Python checking for Cheetah >= 2.0.0 - found
--
-- Python checking for lxml >= 1.3.6
-- Python checking for lxml >= 1.3.6 - found
--
-- Python checking for pygtk >= 2.10.0
-- Python checking for pygtk >= 2.10.0 - found
--
-- Python checking for numpy
-- Python checking for numpy - found
--
-- Configuring gnuradio-companion support...
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_PYTHON = ON
--   Dependency PYTHON_MIN_VER_FOUND = TRUE
--   Dependency CHEETAH_FOUND = TRUE
--   Dependency LXML_FOUND = TRUE
--   Dependency PYGTK_FOUND = TRUE
--   Dependency NUMPY_FOUND = TRUE
--   Enabling gnuradio-companion support.
--   Override with -DENABLE_GRC=ON/OFF
-- Checking for module 'gsl >= 1.10'
--   Found gsl , version 2.3
-- Found GSL: gsl;gslcblas;m  
--
-- Configuring gr-fec support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-fec support.
--   Override with -DENABLE_GR_FEC=ON/OFF
-- Checking for module 'fftw3f >= 3.0'
--   Found fftw3f , version 3.3.5
-- Found FFTW3F: /usr/lib/x86_64-linux-gnu/libfftw3f.so  
--
-- Configuring gr-fft support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency FFTW3F_FOUND = TRUE
--   Enabling gr-fft support.
--   Override with -DENABLE_GR_FFT=ON/OFF
--
-- Configuring gr-filter support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-filter support.
--   Override with -DENABLE_GR_FILTER=ON/OFF
--
-- Configuring gr-analog support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_VOLK = ON
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Enabling gr-analog support.
--   Override with -DENABLE_GR_ANALOG=ON/OFF
--
-- Configuring gr-digital support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_VOLK = ON
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Enabling gr-digital support.
--   Override with -DENABLE_GR_DIGITAL=ON/OFF
--
-- Configuring gr-dtv support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_FEC = ON
--   Enabling gr-dtv support.
--   Override with -DENABLE_GR_DTV=ON/OFF
-- Performing Test SSE2_SUPPORTED
-- Performing Test SSE2_SUPPORTED - Success
--
-- Configuring gr-atsc support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FEC = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-atsc support.
--   Override with -DENABLE_GR_ATSC=ON/OFF
--
-- Configuring gr-audio support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-audio support.
--   Override with -DENABLE_GR_AUDIO=ON/OFF
-- Checking for module 'alsa'
--   Found alsa, version 1.1.3
-- Found ALSA 1.1.3
-- Checking for module 'jack'
--   Found jack, version 1.9.11
-- Found jack: /usr/lib/x86_64-linux-gnu/libjack.so
-- Looking for C++ include AudioUnit/AudioUnit.h
-- Looking for C++ include AudioUnit/AudioUnit.h - not found
-- Looking for C++ include AudioToolbox/AudioToolbox.h
-- Looking for C++ include AudioToolbox/AudioToolbox.h - not found
-- Checking for module 'portaudio-2.0'
--   Found portaudio-2.0, version 19
-- Performing Test PORTAUDIO2_FOUND
-- Performing Test PORTAUDIO2_FOUND - Success
-- Found PORTAUDIO: /usr/include  
-- Checking for module 'comedilib'
--   Found comedilib, version 0.10.2
--
-- Configuring gr-comedi support...
--   Dependency COMEDI_FOUND = 1
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-comedi support.
--   Override with -DENABLE_GR_COMEDI=ON/OFF
--
-- Configuring gr-channels support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-channels support.
--   Override with -DENABLE_GR_CHANNELS=ON/OFF
--
-- Configuring gr-noaa support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-noaa support.
--   Override with -DENABLE_GR_NOAA=ON/OFF
--
-- Configuring gr-pager support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-pager support.
--   Override with -DENABLE_GR_PAGER=ON/OFF
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found
-- Found Qt4: /usr/bin/qmake (found suitable version "4.8.7", minimum required is "4.2.0")
-- QWT Version: 6.1.2
-- Found Qwt: /usr/lib/libqwt.so  
--
-- Python checking for PyQt4
-- Python checking for PyQt4 - found
--
-- Configuring gr-qtgui support...
--   Dependency Boost_FOUND = 1
--   Dependency QT4_FOUND = TRUE
--   Dependency QWT_FOUND = TRUE
--   Dependency ENABLE_VOLK = ON
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency PYTHONLIBS_FOUND = TRUE
--   Dependency PYQT4_FOUND = TRUE
--   Enabling gr-qtgui support.
--   Override with -DENABLE_GR_QTGUI=ON/OFF
--
-- Configuring gr-trellis support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_DIGITAL = ON
--   Enabling gr-trellis support.
--   Override with -DENABLE_GR_TRELLIS=ON/OFF
-- Found UHD: /usr/local/lib/libuhd.so  
--
-- Configuring gr-uhd support...
--   Dependency Boost_FOUND = 1
--   Dependency UHD_FOUND = TRUE
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-uhd support.
--   Override with -DENABLE_GR_UHD=ON/OFF
--   UHD Version: 3.9.2
--
-- Configuring gr-utils support...
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_PYTHON = ON
--   Enabling gr-utils support.
--   Override with -DENABLE_GR_UTILS=ON/OFF
-- Found SDL: /usr/lib/x86_64-linux-gnu/libSDLmain.a;/usr/lib/x86_64-linux-gnu/libSDL.so;-lpthread (found version "1.2.15")
--
-- Configuring gr-video-sdl support...
--   Dependency SDL_FOUND = TRUE
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-video-sdl support.
--   Override with -DENABLE_GR_VIDEO_SDL=ON/OFF
--
-- Configuring gr-vocoder support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-vocoder support.
--   Override with -DENABLE_GR_VOCODER=ON/OFF
-- Found libgsm: /usr/include, /usr/lib/x86_64-linux-gnu/libgsm.so
-- Found libcodec2: /usr/include/codec2, /usr/lib/x86_64-linux-gnu/libcodec2.so
-- Checking for module 'libusb-1.0'
--   Found libusb-1.0, version 1.0.21
-- Found libusb-1.0: /usr/include/libusb-1.0, /usr/lib/x86_64-linux-gnu/libusb-1.0.so
--
-- Configuring gr-fcd support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_AUDIO = ON
--   Dependency LIBUSB_FOUND = TRUE
--   Enabling gr-fcd support.
--   Override with -DENABLE_GR_FCD=ON/OFF
--
-- Configuring gr-wavelet support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency GSL_FOUND = TRUE
--   Enabling gr-wavelet support.
--   Override with -DENABLE_GR_WAVELET=ON/OFF
--
-- Python checking for wx >= 2.8
-- Python checking for wx >= 2.8 - found
--
-- Python checking for numpy
-- Python checking for numpy - found
--
-- Configuring gr-wxgui support...
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_PYTHON = ON
--   Dependency NUMPY_FOUND = TRUE
--   Dependency WX_FOUND = TRUE
--   Enabling gr-wxgui support.
--   Override with -DENABLE_GR_WXGUI=ON/OFF
-- Checking for module 'libzmq'
--   Found libzmq, version 4.2.1
-- Found ZEROMQ: /usr/lib/x86_64-linux-gnu/libzmq.so  
--
-- Configuring gr-zeromq support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ZEROMQ_FOUND = TRUE
--   Enabling gr-zeromq support.
--   Override with -DENABLE_GR_ZEROMQ=ON/OFF
--
-- ######################################################
-- # Gnuradio enabled components                         
-- ######################################################
--   * python-support
--   * testing-support
--   * volk
--   * doxygen
--   * sphinx
--   * gnuradio-runtime
--   * gr-ctrlport
--   * gr-blocks
--   * gnuradio-companion
--   * gr-fec
--   * gr-fft
--   * gr-filter
--   * gr-analog
--   * gr-digital
--   * gr-dtv
--   * gr-atsc
--   * gr-audio
--   * * alsa
--   * * oss
--   * * jack
--   * * portaudio
--   * gr-comedi
--   * gr-channels
--   * gr-noaa
--   * gr-pager
--   * gr-qtgui
--   * gr-trellis
--   * gr-uhd
--   * gr-utils
--   * gr-video-sdl
--   * gr-vocoder
--   * gr-fcd
--   * gr-wavelet
--   * gr-wxgui
--   * gr-zeromq
--
-- ######################################################
-- # Gnuradio disabled components                        
-- ######################################################
--
-- Using install prefix: /usr/local
-- Building for version: 3.7.9 / 3.7.9
-- Configuring incomplete, errors occurred!
See also "/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeOutput.log".
See also "/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeError.log".
address@hidden:~/workarea-gnuradio/gnuradio/build$ cat CMakeFiles/CMakeError.log
Determining if the pthread_create exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_f5151/fast"
/usr/bin/make -f CMakeFiles/cmTC_f5151.dir/build.make CMakeFiles/cmTC_f5151.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o
/usr/bin/cc    -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o   -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.c
Linking C executable cmTC_f5151
/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTC_f5151.dir/link.txt --verbose=1
/usr/bin/cc   -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized     CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o  -o cmTC_f5151 -rdynamic
CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o: In function `main':
CheckSymbolExists.c:(.text+0x1b): undefined reference to `pthread_create'
collect2: error: ld returned 1 exit status
CMakeFiles/cmTC_f5151.dir/build.make:97: recipe for target 'cmTC_f5151' failed
make[1]: *** [cmTC_f5151] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_f5151/fast' failed
make: *** [cmTC_f5151/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.c:
/* */
#include <pthread.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef pthread_create
  return ((int*)(&pthread_create))[argc];
#else
  (void)argc;
  return 0;
#endif
}

Determining if the function pthread_create exists in the pthreads failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_85606/fast"
/usr/bin/make -f CMakeFiles/cmTC_85606.dir/build.make CMakeFiles/cmTC_85606.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_85606.dir/CheckFunctionExists.c.o
/usr/bin/cc    -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DCHECK_FUNCTION_EXISTS=pthread_create   -o CMakeFiles/cmTC_85606.dir/CheckFunctionExists.c.o   -c /usr/share/cmake-3.7/Modules/CheckFunctionExists.c
Linking C executable cmTC_85606
/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTC_85606.dir/link.txt --verbose=1
/usr/bin/cc   -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DCHECK_FUNCTION_EXISTS=pthread_create    CMakeFiles/cmTC_85606.dir/CheckFunctionExists.c.o  -o cmTC_85606 -rdynamic -lpthreads
/usr/bin/ld: cannot find -lpthreads
collect2: error: ld returned 1 exit status
CMakeFiles/cmTC_85606.dir/build.make:97: recipe for target 'cmTC_85606' failed
make[1]: *** [cmTC_85606] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_85606/fast' failed
make: *** [cmTC_85606/fast] Error 2


Determining if the include file intrin.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_beaf5/fast"
/usr/bin/make -f CMakeFiles/cmTC_beaf5.dir/build.make CMakeFiles/cmTC_beaf5.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o
/usr/bin/cc    -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall    -o CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o   -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.c
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.c:1:20: fatal error: intrin.h: No such file or directory
 #include <intrin.h>
                    ^
compilation terminated.
CMakeFiles/cmTC_beaf5.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o' failed
make[1]: *** [CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_beaf5/fast' failed
make: *** [cmTC_beaf5/fast] Error 2


Performing C++ SOURCE FILE Test HAVE_WERROR_UNUSED_CMD_LINE_ARG failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_cf804/fast"
/usr/bin/make -f CMakeFiles/cmTC_cf804.dir/build.make CMakeFiles/cmTC_cf804.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_cf804.dir/src.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall -DHAVE_WERROR_UNUSED_CMD_LINE_ARG   -Werror=unused-command-line-argument -o CMakeFiles/cmTC_cf804.dir/src.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx
cc1plus: error: -Werror=unused-command-line-argument: no option -Wunused-command-line-argument
CMakeFiles/cmTC_cf804.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_cf804.dir/src.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_cf804.dir/src.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_cf804/fast' failed
make: *** [cmTC_cf804/fast] Error 2

Source file was:
int main() { return 0; }
Determining if the include file io.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_7fa70/fast"
/usr/bin/make -f CMakeFiles/cmTC_7fa70.dir/build.make CMakeFiles/cmTC_7fa70.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:16: fatal error: io.h: No such file or directory
 #include <io.h>
                ^
compilation terminated.
CMakeFiles/cmTC_7fa70.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_7fa70/fast' failed
make: *** [cmTC_7fa70/fast] Error 2


Determining if the include file dev/ppbus/ppi.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_b4ff9/fast"
/usr/bin/make -f CMakeFiles/cmTC_b4ff9.dir/build.make CMakeFiles/cmTC_b4ff9.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:27: fatal error: dev/ppbus/ppi.h: No such file or directory
 #include <dev/ppbus/ppi.h>
                           ^
compilation terminated.
CMakeFiles/cmTC_b4ff9.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_b4ff9/fast' failed
make: *** [cmTC_b4ff9/fast] Error 2


Performing C++ SOURCE FILE Test HAVE_SSLEEP failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9e4e6/fast"
/usr/bin/make -f CMakeFiles/cmTC_9e4e6.dir/build.make CMakeFiles/cmTC_9e4e6.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9e4e6.dir/src.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DHAVE_SSLEEP   -o CMakeFiles/cmTC_9e4e6.dir/src.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx:2:25: fatal error: Winbase.h: No such file or directory
     #include <Winbase.h>
                         ^
compilation terminated.
CMakeFiles/cmTC_9e4e6.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9e4e6.dir/src.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9e4e6.dir/src.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9e4e6/fast' failed
make: *** [cmTC_9e4e6/fast] Error 2

Source file was:

    #include <Winbase.h>
    int main(){Sleep(0); return 0;}
    
Performing C++ SOURCE FILE Test HAVE_CREATEFILEMAPPING failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9e3c5/fast"
/usr/bin/make -f CMakeFiles/cmTC_9e3c5.dir/build.make CMakeFiles/cmTC_9e3c5.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9e3c5.dir/src.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DHAVE_CREATEFILEMAPPING   -o CMakeFiles/cmTC_9e3c5.dir/src.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx:2:25: fatal error: windows.h: No such file or directory
     #include <windows.h>
                         ^
compilation terminated.
CMakeFiles/cmTC_9e3c5.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9e3c5.dir/src.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9e3c5.dir/src.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9e3c5/fast' failed
make: *** [cmTC_9e3c5/fast] Error 2

Source file was:

    #include <windows.h>
    int main(){
        HANDLE handle;
        int size;
        LPCTSTR lpName;
        handle = CreateFileMapping(
                         INVALID_HANDLE_VALUE,    // use paging file
                         NULL,                    // default security
                         PAGE_READWRITE,          // read/write access
                         0,                       // max. object size
                         size,                    // buffer size
                         lpName);                 // name of mapping object
        return 0;
    }
Determining if the include file windows.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_c64ac/fast"
/usr/bin/make -f CMakeFiles/cmTC_c64ac.dir/build.make CMakeFiles/cmTC_c64ac.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:21: fatal error: windows.h: No such file or directory
 #include <windows.h>
                     ^
compilation terminated.
CMakeFiles/cmTC_c64ac.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_c64ac/fast' failed
make: *** [cmTC_c64ac/fast] Error 2


Determining if the include file AudioUnit/AudioUnit.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_dfba5/fast"
/usr/bin/make -f CMakeFiles/cmTC_dfba5.dir/build.make CMakeFiles/cmTC_dfba5.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:33: fatal error: AudioUnit/AudioUnit.h: No such file or directory
 #include <AudioUnit/AudioUnit.h>
                                 ^
compilation terminated.
CMakeFiles/cmTC_dfba5.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_dfba5/fast' failed
make: *** [cmTC_dfba5/fast] Error 2


Determining if the include file AudioToolbox/AudioToolbox.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_f42fb/fast"
/usr/bin/make -f CMakeFiles/cmTC_f42fb.dir/build.make CMakeFiles/cmTC_f42fb.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:39: fatal error: AudioToolbox/AudioToolbox.h: No such file or directory
 #include <AudioToolbox/AudioToolbox.h>
                                       ^
compilation terminated.
CMakeFiles/cmTC_f42fb.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_f42fb/fast' failed
make: *** [cmTC_f42fb/fast] Error 2


Determining if the Q_WS_WIN exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9cca0/fast"
/usr/bin/make -f CMakeFiles/cmTC_9cca0.dir/build.make CMakeFiles/cmTC_9cca0.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o
/usr/bin/c++    -I/usr/include/qt4  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx: In function ‘int main(int, char**)’:
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:8:19: error: ‘Q_WS_WIN’ was not declared in this scope
   return ((int*)(&Q_WS_WIN))[argc];
                   ^~~~~~~~
CMakeFiles/cmTC_9cca0.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9cca0/fast' failed
make: *** [cmTC_9cca0/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:
/* */
#include <QtCore/qglobal.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef Q_WS_WIN
  return ((int*)(&Q_WS_WIN))[argc];
#else
  (void)argc;
  return 0;
#endif
}

Determining if the Q_WS_QWS exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9a636/fast"
/usr/bin/make -f CMakeFiles/cmTC_9a636.dir/build.make CMakeFiles/cmTC_9a636.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o
/usr/bin/c++    -I/usr/include/qt4  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx: In function ‘int main(int, char**)’:
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:8:19: error: ‘Q_WS_QWS’ was not declared in this scope
   return ((int*)(&Q_WS_QWS))[argc];
                   ^~~~~~~~
CMakeFiles/cmTC_9a636.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9a636/fast' failed
make: *** [cmTC_9a636/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:
/* */
#include <QtCore/qglobal.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef Q_WS_QWS
  return ((int*)(&Q_WS_QWS))[argc];
#else
  (void)argc;
  return 0;
#endif
}

Determining if the Q_WS_MAC exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_91ff3/fast"
/usr/bin/make -f CMakeFiles/cmTC_91ff3.dir/build.make CMakeFiles/cmTC_91ff3.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o
/usr/bin/c++    -I/usr/include/qt4  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx: In function ‘int main(int, char**)’:
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:8:19: error: ‘Q_WS_MAC’ was not declared in this scope
   return ((int*)(&Q_WS_MAC))[argc];
                   ^~~~~~~~
CMakeFiles/cmTC_91ff3.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_91ff3/fast' failed
make: *** [cmTC_91ff3/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:
/* */
#include <QtCore/qglobal.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef Q_WS_MAC
  return ((int*)(&Q_WS_MAC))[argc];
#else
  (void)argc;
  return 0;
#endif
}

How could I solve this issue?
Thanks so much!
Ivan



Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY! http://tisca.li/myopen


_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



reply via email to

[Prev in Thread] Current Thread [Next in Thread]