Still struggling with this but closer:
Have not been able to get cmake to configure gr-osmosdr, but compile by hand, appears to work, at least hackrf.
Unfortunately, from the Logging section in gnuradio wiki:
Using Logging in Out of Tree Modules
In order to use the logging interface in an out of tree module based on a gr_modtool template module, several CMake modifications are required. Without these changes, logging will be disabled.
In order to use the logging interface in an out of tree module based on a gr_modtool template module, several CMake modifications are required. Without these changes, logging will be disabled.
Not sure why osmosdr appears in built in types?
What/where "Allocating 15 zero-copy buffers" comes from ?
Any hints for debugging this would be most appreciated :)
gr-osmosdr v0.1.4-127-g4d83c606 (0.1.5git) gnuradio 3.8tech-preview-365-gd66bc948
built-in source types: file osmosdr rtl rtl_tcp hackrf
Using HackRF One with firmware 2018.01.1
gr-osmosdr v0.1.4-127-g4d83c606 (0.1.5git) gnuradio 3.8tech-preview-365-gd66bc948
built-in source types: file osmosdr rtl rtl_tcp hackrf
Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Allocating 15 zero-copy buffers
built-in source types: file osmosdr rtl rtl_tcp hackrf
Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Allocating 15 zero-copy buffers
If something is requisite, how can it possibly be, prerequisite?
later, steve
http://umn.edu/~barbo