|
From: | Kyeong Su Shin |
Subject: | Re: [Discuss-gnuradio] GNURadio v3.8.0.0 Blocs.xml |
Date: | Tue, 20 Aug 2019 10:16:26 +0000 |
Hello Jean Pierre,
I am sorry that you are experiencing problems. But again, did you try running
sudo apt purge gnuradio #to remove GNU Radio 3.7.11
sudo apt autoremove
before removing and re-installing GNU Radio 3.8 and gr-osmosdr?
(I am assuming Ubuntu 18.04, because your package versions sound like the ones included in Ubuntu 18.04).
Your installation procedures for gr-osmosdr sounds correct to me. That is exactly what I did to compile gr-osmosdr.
In the worst case, you can search for any files that are contained in GNU Radio 3.7.11 and try manually deleting them or maybe re-install the whole Linux system (but I think you don't have to go that far).
--------------
Google Translated:
Je suis désolé que vous rencontrez des problèmes. Mais encore une fois, avez-vous essayé:
sudo apt purge gnuradio #pour supprimer GNU Radio 3.7.11
sudo apt autoremove
Dans le pire des cas, vous pouvez rechercher tous les fichiers contenus dans GNU Radio 3.7.11 et essayer de les supprimer manuellement ou peut-être réinstaller tout le système Linux (mais je pense que vous n'avez pas à aller aussi loin).
----------------
Regards,
Kyeong Su Shin
보낸 사람: Jean Pierre Mallet <address@hidden>
보낸 날짜: 2019년 8월 20일 화요일 오후 5:12 받는 사람: Kyeong Su Shin <address@hidden> 제목: RE: GNURadio v3.8.0.0 Blocs.xml
I reinstalled entirely gr-osmocom gr8 and I got absolutely the same result: That's how I proceed, maybe there is a problem that I do not control. 1) gnuradio is in: / home / jean/ gnuradio 'Jean is the user'
2) I'm downloading gr-osmosdr /gr3.8
3) I extracted the files in; / Home / jean / gr-osmosdr
4) The rest is classic:
cd gr-osmosdr /
mkdir build
cd build
cmake ../
make
sudo make install
sudo ldconfig
Then gnuradio-companion is run, The sources are in the list of blocks, but I always get the same message that I gave you highlighted in red ..
Tell me if my procedure is correct or if I have to change something in relation to yours.
Thank you .. Cheers
Jean Pierre
Provenance : Courrier pour Windows 10
De : Kyeong Su Shin <address@hidden>
Envoyé : Monday, August 19, 2019 4:48:07 PM À : Jean Pierre Mallet <address@hidden>; address@hidden <address@hidden> Objet : Re: GNURadio v3.8.0.0 Blocs.xml
Hello Jean Pierre:
Okay, this is what my computer gives when I build and run the same Osmocom module:
Generating: '/home/piloteer/top_block.py'
Executing: /usr/bin/python3.6 -u /home/piloteer/top_block.py
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-piloteer'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-piloteer'
gr-osmosdr v0.1.4-133-g512aeda2 (0.1.5git) gnuradio 3.8.0.0
built-in source types: rtl uhd hackrf rfspace redpitaya
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.15.0.git-1-gf83faf28
Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Found Fitipower FC0012 tuner
Allocating 15 zero-copy buffers
So, your problem is not reproducible on my box. It attaches to GNU Radio 3.8.0.0 alright. Again, what I suspect is that you may have installed an older version of GNU Radio on your system before and somehow that did not get removed from the system properly.
I'd like to ask you to double-check that possibility (try sudo apt purge gnuradio && sudo apt autoremove and then re-build and re-install gr-osmosdr from the gr 3.8 tree).
Regards,
Kyeong Su Shin
보낸 사람: Jean Pierre Mallet <address@hidden> 대신 Discuss-gnuradio <discuss-gnuradio-bounces+ksshin=address@hidden>
보낸 날짜: 2019년 8월 17일 토요일 오후 8:58 받는 사람: address@hidden <address@hidden> 제목: [Discuss-gnuradio] TR: GNURadio v3.8.0.0 Blocs.xml De : Jean Pierre Mallet <address@hidden>
Envoyé : Saturday, August 17, 2019 1:56:39 PM À : Kyeong Su Shin <address@hidden> Objet : RE: GNURadio v3.8.0.0 Blocs.xml Dear Kyeong,
I have 2 computers, one with GNURadio v3.7.15 sour Windows 10 which gives satisfaction, and the other a Dell laptop, on which I installed GNURadio v3.8.0.0, and on which I try to install gr-osmosdr-gr 3.8.
Cet ordinateur n'a pas eu auparavant de GNURadio installé.
J'ai découvert sur gr-osmosdr-gr3.8/build/lib/ congig.h le script suivant:
#ifndef CONFIG_H_IN
#define CONFIG_H_IN
#define GR_OSMOSDR_VERSION "v0.1.x-xxx-xunknown"
#define GR_OSMOSDR_LIBVER "0.1.5git"
#define ENABLE_OSMOSDR
/* #undef ENABLE_FCD */
/* #undef ENABLE_FILE */
#define ENABLE_RTL
/* #undef ENABLE_RTL_TCP */
#define ENABLE_UHD
/* #undef ENABLE_MIRI */
/* #undef ENABLE_SDRPLAY */
/* #undef ENABLE_HACKRF */
/* #undef ENABLE_BLADERF */
#define ENABLE_RFSPACE
/* #undef ENABLE_AIRSPY */
/* #undef ENABLE_SOAPY */
#define ENABLE_REDPITAYA
/* #undef ENABLE_FREESRP */
//provide NAN define for MSVC older than VC12
#if defined(_MSC_VER) && (_MSC_VER < 1800)
#include <limits>
#define NAN std::numeric_limits<double>::quiet_NaN()
#endif
#endif // CONFIG_H_IN
It is advisable to look again in the soft to debug it
Cheers
JP Mallet
Provenance : Courrier pour Windows 10
De : Kyeong Su Shin <address@hidden>
Envoyé : Friday, August 16, 2019 6:49:58 PM À : Jean Pierre Mallet <address@hidden>; address@hidden <address@hidden> Objet : Re: GNURadio v3.8.0.0 Blocs.xml
Hello Jean Pierre:
Did you uninstall GNU Radio 3.7.x before installing GNU Radio 3.8.x?
If you didn't, you may want to
This is because I suspect that you may have two versions of GNU Radio on your system and gr-osmosdr somehow got linked to GNU Radio 3.7.x (instead of 3.8.x) during the build process.
Regards,
Kyeong Su Shin
보낸 사람: Jean Pierre Mallet <address@hidden> 대신 Discuss-gnuradio <discuss-gnuradio-bounces+ksshin=address@hidden>
보낸 날짜: 2019년 8월 16일 금요일 오후 10:52 받는 사람: address@hidden <address@hidden> 제목: [Discuss-gnuradio] GNURadio v3.8.0.0 Blocs.xml
Generating: '/home/jean/Documents/WBFM_RX_QT_GUI_08162019.py'
Generating: '/home/jean/Documents/WBFM_RX_QT_GUI_08162019.py'
Executing: /usr/bin/python3.6 -u /home/jean/Documents/WBFM_RX_QT_GUI_08162019.py
linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.000-0-unknown
gr-osmosdr v0.1.x-xxx-xunknown (0.1.5git) gnuradio 3.7.11
built-in source types: osmosdr rtl uhd rfspace redpitaya
Using device #0 Realtek RTL2838UHIDIR
Found Elonics E4000 tuner
gr::log :INFO: audio source - Audio sink arch: alsa
So there is still a bug on the version of the ‘mavaenskae’ program. I do not know if I have the ability to fix it, but maybe the community can! Or maybe Marcus !!
Congratulations to all
Jean Pierre
Provenance : Courrier pour Windows 10
|
[Prev in Thread] | Current Thread | [Next in Thread] |