Re: Error cross-compiling GNU Radio 3.8 for E310

[Cinaed Simson]

On 2/10/20 3:11 AM, address@hidden wrote:
> Hi Ron!
> your flags solved the specific error.
> The error on stdlib.h still occurs.
> Ivan

Hi Ivan - I've seen that error before. Try changing the include file name to

  #include <cstdlib>

since it's bombing in C++ code.

-- Cinaed



the #include_next doesn't care if it's if it's an absolute path.
> 
> Il 10.02.2020 11:25 Ron Economos ha scritto:
> 
>> For the "selected processor does not support `pld [aVector,#128]' in ARM 
>> mode" error, you can try adding these flags to the cmake command line.
>>
>> -DCMAKE_CXX_FLAGS:STRING="-march=armv7-a -mfloat-abi=hard -mfpu=neon 
>> -mtune=cortex-a9" -DCMAKE_C_FLAGS:STRING="-march=armv7-a 
>> -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9" 
>> -DCMAKE_ASM_FLAGS:STRING="-march=armv7-a -mfloat-abi=hard -mfpu=neon 
>> -mtune=cortex-a9 -g"
>>
>> Ron
>>
>> On 2/10/20 00:56, address@hidden <mailto:address@hidden>wrote:
>>> Dear all, I'm compiling GNU Radio 3.8 for E310 using the newer file
>>> system and SDK. Cmake runs smoothly, but when I compile I can see
>>> mainly two errors: - stdlib.h not found: this is impossible, because
>>> I can find it in the sysroot of the SDK. - "selected processor does
>>> not support `pld [aVector,#128]' in ARM mode" and something similar.
>>> The output of cmake and make can be found here:
>>> https://pastebin.com/feyfpgUV Do you know how I can fix these errors?
>>> Thanks so much. Ivan
> 
> 
> 
> Con Tiscali Mobile Smart 30 4G hai minuti illimitati, 100 SMS e 30 Giga
> in 4G a soli 8,99€ al mese. http://tisca.li/smart30
>