discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Gnuradio 3.8 on a Raspberry pi 4 B?


From: Glen Langston
Subject: Re: Gnuradio 3.8 on a Raspberry pi 4 B?
Date: Thu, 28 May 2020 21:33:17 -0400

Hi

Thanks for your help.

I’ve written the image to an SDCARD and the PI4 boots to
the command line prompt.  The password is accepted and
I’ve looked around.

Gnuradio seems to be installed, but not the xwindow system.

How do you use gnuradio-companion etc?

I could not find “xstartup” or some such program.

Thanks

Glen

> On May 24, 2020, at 3:59 PM, jean-michel.friedt@femto-st.fr wrote:
> 
> I have uploaded http://jmfriedt.org/sdcard.img
> my Buildroot image generated for RPi4 that I have been
> using daily for the last 2 months, so pretty sure it is
> working. Actually it is 1.1 GB because of lapack needed
> for gnss-sdr but GNU Radio 3.8/Python3 will only require
> about 500 MB.
> Gwenhael Goavec-Merou ported all GNU Radio related software/libraries
> to Buildroot: the missing parts for gnss-sdr are found at
> https://github.com/oscimp/PlutoSDR in the for_next branch.
> 
> root passwd=root, no user account, USRP FPGA images to be added
> in usr/share/uhd/images manually if libuhd is needed. Tested with
> RTL-SDR DVB-T dongle, PlutoSDR (gr-iio) and B210.
> 
> JM
> 
> --
> JM Friedt, FEMTO-ST Time & Frequency/SENSeOR, 26 rue de l'Epitaphe,
> 25000 Besancon, France
> 
> May 24, 2020 9:51 PM, "Glen I Langston" <glen.i.langston@gmail.com> wrote:
> 
>> Hello
>> 
>> I’ve been a great proponent of gnuradio, but I’m finding in
>> increasing difficult to do anything new, as installation of 3.8 is
>> essentially impossible for most people.
>> 
>> I’ve written and built my own python modules and C++ blocks.
>> 
>> However, despite months of trying now, I can not get 3.8 to install
>> on a raspberry pi. 
>> 
>> Has anyone achieved 3.8 on a raspberry pi?
>> 
>> If so can you please save the entire OS, gzip compressed and put it
>> online somewhere. It will probably be about 3 GB compressed.
>> 
>> Thanks
>> 
>> Glen
>> 
>> Note that there are many many (too many) different guides on line
>> 
>> 1) apt-get
>> 
>> 2) pybombs 
>> 
>> 3) git clone then build
>> 
>> each one fails in a different way.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]