R: Funcube Dongle Pro Plus help

[Vincenzo Mone]

Sorry Marcus,
I thought it was closed as I did not get any reply from a long time.
Please what I need to check as I still did not understood  how to know The
gnuradio path for the correct command:

cmake -DCMAKE_INSTALL_PREFIX= "path to gnuradio installation" ../

Thanks

73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************
      ******   GSM  +39 328 7110193  ******
      *****     SMS  +39 328 7110193    *****
      *********************************

> -----Messaggio originale-----
> Da: Marcus Müller <mueller@kit.edu>
> Inviato: lunedì 31 agosto 2020 18:11
> A: Vincenzo Mone <vimone@alice.it>; Gnuradio Mailing List <discuss-
> gnuradio@gnu.org>
> Oggetto: Re: Funcube Dongle Pro Plus help
> 
> Vincenzo,
> 
> please don't open a new thread for every other email you have sent. You
> have gotten easily confused in the past, and we can avoid that if you can
try
> to focus on staying on a single email thread, and it was a big problem for
you.
> Please don't open a new thread before having solved this issue, and
instead
> reply to the things here, keeping discuss-gnuradio@gnu.org in CC:.
> 
> Something went wrong during your software build or installation. We can't
> tell you what that was - have you checked whether the cmake, the make,
> the make install commands were successful?
> 
> Best regards,
> 
> Marcus
> 
> On 8/31/20 5:09 PM, Vincenzo Mone wrote:
> >
> > Hello
> >
> > Please I am trying to install the FCDPROPLUS which is the Funcube
> > Dongle Pro Plus.
> >
> > This is what I’ve done following the instructions on the author page:
> >
> > git clone https://github.com/dl1ksv/gr-fcdproplus
> >
> > cd ~/gr-fcdproplus
> >
> > mkdir build
> >
> > cd build
> >
> > cmake -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_BUILD_TYPE=Release
> ../
> >
> > make
> >
> > sudo make install
> >
> > sudo ldconfig
> >
> > then I have created a file named '99-usb-serial.rules'  with the
> > following content:
> >
> > SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> ATTRS{idProduct}=="fb56"
> > MODE:="0666"
> >
> > SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> ATTRS{idProduct}=="fb31"
> > MODE:="0666"
> >
> > KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> > ATTRS{idProduct}=="fb56", MODE="0666"
> >
> > KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> > ATTRS{idProduct}=="fb
> >
> > Then:
> >
> > cd /etc/udev/rules.d
> >
> > sudo cp -v ~/<your folder>/99-usb-serial.rules ./
> >
> > sudo udevadm trigger
> >
> > After that executing grc  I sould find in Fcd
> >
> > Funcube Dongle
> >
> > Funcube Dongle control
> >
> > Funcube Dongle Pro+
> >
> > Funcube Dongle Pro+ control
> >
> > But I do not find any FCD group.
> >
> > Please anybody can tell me if I am doing something wrong?
> >
> > Thanks
> >
> > 73’s de Enzo IK8OZV
> > EasyLog 5 BetaTester
> > EasyLog PDA BetaTester
> > WinBollet BetaTester
> > D.C.I. CheckPoint Regione Campania
> > Skype: ik8ozv8520
> >
> >
> >
> >
> > *********************************
> >
> > ****** GSM  +39 328 7110193  ******
> >
> >       *****     SMS  +39 328 7110193 *****
> >
> >       *********************************
> >