Re: R: Re: Gnuradio / Ubuntu 20.10

[Ralf Gorholt]

Hello Marcus,

I had done this before (installed from PPA) but I didn't get a module
that worked with GNU Radio 3.8.2. That's why I have compiled it from
source. When the module is compiled, you have to pay attention to the
correct prefix for cmake.

Ralf

Am 11.04.2021 um 14:37 schrieb Marcus Müller:
> You have to do none of this,
>
> sudo apt install gr-osmosdr
>
> does everything. And then you're done and can use the OSMOSDR Source or the 
> RTL-Source
> (which are essentially the same).
>
> Cheers,
> Marcus
>
> On 11.04.21 13:26, Ralf Gorholt wrote:
> > Hello Alberto,
> >
> > you may try this:
> >
> > git clone git://github.com/osmocom/gr-osmosdr -b gr3.8
> >
> > That's how I got the sources for GNU Radio 3.8 one or two weeks ago.
> >
> > Regards,
> >
> > Ralf
> >
> > Am 11.04.2021 um 12:35 schrieb alberto.alletto@alice.it:
> > > I follow now this guide:
> > > https://lists.gnu.org/archive/html/discuss-gnuradio/2020-09/pdfNp27msymbN.pdf
> > >
> > > But at point 7 i have a problem.
> > >
> > > alberto@alberto-Studio-XPS-1340:~/sdr_stuff$ git clone 
> > > https://git.osmocom.org/gr-osmosdr
> > > Clone in 'gr-osmosdr' in corso...
> > > error: Failed to connect to git.osmocom.org port 443: Connessione scaduta 
> > > (curl_result =
> > > 7, http_code = 0, sha1 = 3d94e1a5d172fc93da9e9638536ee773f4b5a85a)
> > > error: Unable to find 99f14f4991f4154d743fd08b9c49e4eaf8a70001 under
> > > https://git.osmocom.org/gr-osmosdr
> > > Cannot obtain needed blob 99f14f4991f4154d743fd08b9c49e4eaf8a70001
> > > while processing commit 2d504bde50a0c560a9d31b7b38982bd44cc7fe9d.
> > > error: recupero non riuscito.
> > > alberto@alberto-Studio-XPS-1340:~/sdr_stuff$
> > >
> > >      ----Messaggio originale----
> > >      Da: fabian@opencode.eu
> > >      Data: 10-apr-2021 22.08
> > >      A: <discuss-gnuradio@gnu.org>
> > >      Ogg: Re: Gnuradio / Ubuntu 20.10
> > >
> > >      Hi Alberto,
> > >      Just open a terminal and run
> > >      sudo apt install gnuradio
> > >      And you should be fine. The dependencies for the rtl-sdr are already 
> > > included.
> > >      It is probably not the latest&greatest version of gnuradio, but IT should 
> > > get you
> > >      started.
> > >
> > >      Fabian
> > >
> > >      Am 10. April 2021 21:38:47 MESZ schrieb Alberto Alletto 
> > > <alberto.alletto@alice.it>:
> > >
> > >          Hi!
> > >          I’m new on ubuntu world.
> > >          Today i have installed ubuntu 20.10 and i want install Gnuradio to 
> > > work with RTL-SDR receiver.
> > >
> > >          what is the correct procedure to install gnuradio to work with the 
> > > rtl-sdr receiver?
> > >
> > >          Tnx
> > >          Alberto
> > >
> > >          Inviato da iPhone