[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: R: Re: R: Re: Gnuradio / Ubuntu 20.10
From: |
Marcus Müller |
Subject: |
Re: R: Re: R: Re: Gnuradio / Ubuntu 20.10 |
Date: |
Mon, 12 Apr 2021 00:50:31 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.8.1 |
You'd have to have these installed before you build your gr-osmosdr from
source, otherwise
the gr-osmosdr can't use rtl-sdrs.
So, they must already be there :)
On 11.04.21 22:02, Cinaed Simson wrote:
> Also, you may want to install the rtl software
>
> apt install rtl-sdr librtlsdr
>
> It's possible they may have been installed with gr-osmosdr.
>
> -- Cinaed
>
>
> On 4/11/21 9:30 AM, alberto.alletto@alice.it wrote:
>> I have followed pdf guide and now work fine but....
>> It work fine but after oper FFT window (QT GUI SINK) there is this alert:
>>
>> Warning: failed to XInitThreads()
>> gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.1.0
>>
>> why ?
>>
>> Alberto
>>
>> ----Messaggio originale----
>> Da: mueller@kit.edu
>> Data: 11-apr-2021 17.31
>> A: <discuss-gnuradio@gnu.org>
>> Ogg: Re: R: Re: Gnuradio / Ubuntu 20.10
>>
>> Hi Ralf,
>>
>> glad to hear you've got it to work!
>>
>> When not using the PPA (which I was assuming you'd be doing), you'd get
>> the exact
>> gr-osmosdr that works with Ubuntu's version of GNU Radio (i.e. 3.8.1.0
>> as I thought
>> you've
>> installed?).
>>
>> Best regards,
>> Marcus
>>
>> On 11.04.21 16:40, Ralf Gorholt wrote:
>> > Hello Marcus,
>> >
>> > I had done this before (installed from PPA) but I didn't get a module
>> > that worked with GNU Radio 3.8.2. That's why I have compiled it from
>> > source. When the module is compiled, you have to pay attention to the
>> > correct prefix for cmake.
>> >
>> > Ralf
>> >
>> > Am 11.04.2021 um 14:37 schrieb Marcus Müller:
>> >> You have to do none of this,
>> >>
>> >> sudo apt install gr-osmosdr
>> >>
>> >> does everything. And then you're done and can use the OSMOSDR Source
>> or the
>> RTL-Source
>> >> (which are essentially the same).
>> >>
>> >> Cheers,
>> >> Marcus
>> >>
>> >> On 11.04.21 13:26, Ralf Gorholt wrote:
>> >>> Hello Alberto,
>> >>>
>> >>> you may try this:
>> >>>
>> >>> git clone git://github.com/osmocom/gr-osmosdr -b gr3.8
>> >>>
>> >>> That's how I got the sources for GNU Radio 3.8 one or two weeks ago.
>> >>>
>> >>> Regards,
>> >>>
>> >>> Ralf
>> >>>
>> >>> Am 11.04.2021 um 12:35 schrieb alberto.alletto@alice.it:
>> >>>> I follow now this guide:
>> >>>>
>> https://lists.gnu.org/archive/html/discuss-gnuradio/2020-09/pdfNp27msymbN.pdf
>>
>> <https://lists.gnu.org/archive/html/discuss-gnuradio/2020-09/pdfNp27msymbN.pdf>
>> >>>>
>> >>>> But at point 7 i have a problem.
>> >>>>
>> >>>> alberto@alberto-Studio-XPS-1340:~/sdr_stuff$ git clone
>> https://git.osmocom.org/gr-osmosdr <https://git.osmocom.org/gr-osmosdr>
>> >>>> Clone in 'gr-osmosdr' in corso...
>> >>>> error: Failed to connect to git.osmocom.org port 443: Connessione
>> scaduta
>> (curl_result =
>> >>>> 7, http_code = 0, sha1 = 3d94e1a5d172fc93da9e9638536ee773f4b5a85a)
>> >>>> error: Unable to find 99f14f4991f4154d743fd08b9c49e4eaf8a70001 under
>> >>>> https://git.osmocom.org/gr-osmosdr
>> <https://git.osmocom.org/gr-osmosdr>
>> >>>> Cannot obtain needed blob 99f14f4991f4154d743fd08b9c49e4eaf8a70001
>> >>>> while processing commit 2d504bde50a0c560a9d31b7b38982bd44cc7fe9d.
>> >>>> error: recupero non riuscito.
>> >>>> alberto@alberto-Studio-XPS-1340:~/sdr_stuff$
>> >>>>
>> >>>> ----Messaggio originale----
>> >>>> Da: fabian@opencode.eu
>> >>>> Data: 10-apr-2021 22.08
>> >>>> A: <discuss-gnuradio@gnu.org>
>> >>>> Ogg: Re: Gnuradio / Ubuntu 20.10
>> >>>>
>> >>>> Hi Alberto,
>> >>>> Just open a terminal and run
>> >>>> sudo apt install gnuradio
>> >>>> And you should be fine. The dependencies for the rtl-sdr are
>> already
>> included.
>> >>>> It is probably not the latest&greatest version of gnuradio,
>> but IT should
>> get you
>> >>>> started.
>> >>>>
>> >>>> Fabian
>> >>>>
>> >>>> Am 10. April 2021 21:38:47 MESZ schrieb Alberto Alletto
>> <alberto.alletto@alice.it>:
>> >>>>
>> >>>> Hi!
>> >>>> I’m new on ubuntu world.
>> >>>> Today i have installed ubuntu 20.10 and i want install
>> Gnuradio to
>> work with
>> >>>> RTL-SDR receiver.
>> >>>>
>> >>>> what is the correct procedure to install gnuradio to work
>> with the
>> rtl-sdr
>> >>>> receiver?
>> >>>>
>> >>>> Tnx
>> >>>> Alberto
>> >>>>
>> >>>> Inviato da iPhone
>> >>>>
>> >>>>
>> >>>>
>> >
>> >
>>
>>
>>
>
smime.p7s
Description: S/MIME Cryptographic Signature