[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: USRP E310 based transceiver
From: |
Marcus D Leech |
Subject: |
Re: USRP E310 based transceiver |
Date: |
Mon, 26 Apr 2021 20:40:08 -0400 |
Also—missed this the first time around. The AD9361 has only a single LO
synthesizer in each duration. Meaning that both RX channels will be tuned to
the same RF frequency.
Sent from my iPhone
> On Apr 26, 2021, at 7:58 PM, Marcus D Leech <patchvonbraun@gmail.com> wrote:
>
> The RX gain range on the RF front end goes up to 72dB, so you’re about 40dB
> below maximum RX gain.
>
> Sent from my iPhone
>
>> On Apr 26, 2021, at 6:09 PM, Ivan Zahartchuk <adray0001@gmail.com> wrote:
>>
>>
>> Hello. I want to make a transceiver based on USRP E310. That is, on one
>> channel, reception and on another transceiver. But I can't see signals on
>> the receive channel. And the LEDs do not show transmission. Tell me in which
>> direction to look.
>> <Снимок экрана от 2021-04-27 00-55-22.png>
>>
>>