[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Error regarding communication connection between GNUradio and SDRpla
From: |
Glen Langston |
Subject: |
Re: Error regarding communication connection between GNUradio and SDRplayRSPdx |
Date: |
Sun, 12 Jan 2025 10:43:57 -0500 |
Hi Franco,
I’m following your instructions for sdrplay3 and seem to be missing libsdrplay
What’s the best way to install that?
Thanks
Glen
This is on the latest Raspberry pi 5 OS
> On Oct 17, 2024, at 9:52 PM, Franco VENTURI <fventuri@comcast.net> wrote:
>
> Yuhe, I think gr-osmosdr was the old way to interface an SDR with GNU Radio.
> With recent versions of GNU Radio you may want to use one of these two ways:
> - gr-soapy, which is an in-tree module and should be part of GNU Radio
> 3.10.10 - gr-sdrplay3, which is an out-of-tree module I wrote; it uses
> directly the SDRplay API to connect to your RSP (i.e. it does not require
> SoapySDR or the SoapySDRPlay3 module). You can find the OOT module
> 'gr-sdrplay3' here: https://github.com/fventuri/gr-sdrplay3 I'll be happy
> to help you if you have any questions. Franco
>>
>> On 10/17/2024 9:36 PM EDT 徐雨荷 <yuhe24@mails.jlu.edu.cn> wrote:
>> I’m not sure this is where I should be asking this question but here
>> goes.
>> I try to read the data of SDRplay on GNUradio, but it shows an error. It
>> thinks there is something wrong with the installation or configuration of my
>> USB device driver and communication is not possible.But SDRuno software can
>> be used to read data normally, what should I do now? I hope I can get some
>> help.Attached below is the error report from GNUradio. Yuhe gr-osmosdr
>> 0.2.0.0 (0.2.0) gnuradio 3.10.10.0
>> built-in source types: file rtl rtl_tcp uhd miri hackrf bladerf airspy
>> airspyhf soapy redpitaya
>> [INFO] [UHD] Win32; Microsoft Visual C++ version 14.2; Boost_108200;
>> UHD_4.6.0.0-release
>> [WARNING] Unable to scan local: -19
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_2717&PID_5023\7&27C58F36&0&2'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_3277&PID_0029\0001'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_2717&PID_5023&MI_01\8&F29D925&0&0001'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_05E3&PID_0610\6&72FCEC3&0&2'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_2717&PID_5023&MI_00\8&F29D925&0&0000'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_05E3&PID_0625\6&72FCEC3&0&4'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\ROOT_HUB30\5&292403F0&0&0'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_13D3&PID_3563\000000000'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_3277&PID_0029&MI_00\7&18314511&0&0000'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\ROOT_HUB30\5&14F916E1&0&0'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\ROOT_HUB30\5&33507A3D&0&0'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_1A40&PID_0101\7&27C58F36&0&1'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_13D3&PID_3563&MI_00\7&1D754FA2&0&0000'
>> libusb: info [get_guid] no DeviceInterfaceGUID registered for
>> 'USB\VID_0951&PID_1666\80C5F274C4DA159098360041'
>> [WARNING] Unable to scan ip: -19
>> [INFO] Using format CF32.
>>
- Re: Error regarding communication connection between GNUradio and SDRplayRSPdx,
Glen Langston <=