[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How to work in GNUStep?
From: |
Jatin Nansi |
Subject: |
Re: How to work in GNUStep? |
Date: |
Fri, 5 Apr 2002 21:28:36 +0530 |
Hi,
IT WORKS.
finally.
I decided to do every thing from scratch. I also did a cvs update.
if only i had cvs updated b4. but now it all works like a charm.
the guide is perfect. i followed it to the letter and everything works.
Thanks all (Dennis, Max & Pete).
Jatin
PS, Pete, try to use cvs and update everything.
I also didnot need to change anything in
<homedir>/GNUstep/Defaults/.GNUstepDefaults
On Friday 05 April 2002 20:21, Dennis Leeuw wrote:
> Just to make sure nothing is left do:
> <editor> <homedir>/GNUstep/Defaults/.GNUstepDefaults
>
> And empty the following sections:
> NSGlobalDomain = {
> };
> gdnc = {
> };
>
> This will give you some errors about timezones etc. while starting .apps
> but ignore for now.
>
> Dennis
>
> Jatin Nansi wrote:
> > Hi
> >
> > no that doesnot help.
> > I did do something else meanwhile.
> > although the guide doesnot say so, i did
> > make install for the xgps directory in core.
> > then the errors change:
> >
> > jatin@jatinnansi:~> openapp GWorkspace.app
> > Apr 05 19:57:19 GWorkspace[7091]
> > I couldn't contact the notification server for local host -
> > so I'm attempting to to start one - which will take a few seconds.
> > It is recommended that you start the notification server (gdnc) either at
> > login or (better) when your computer is started up.
> > Uncaught exception NSGenericException, reason: unable to register
> > GDNCServer-jatinnansi
> > Segmentation fault
> >
> > now i dont think that the backend is a problem. i am positive that
> > gdomap, gdnc and gpbs are working. so why is GWorkspace not finding it?
> >
> > Jatin
> >
> > On Friday 05 April 2002 19:24, Dennis Leeuw wrote:
> > > Just for testing sake:
> > > remove .xinitrc file and run:
> > > /usr/GNUstep/System/Makefiles/GNUstep-reset.sh
> > > source /usr/GNUstep/System/Makefiles/GNUstep.sh
> > > openapp GWorkspace.app
> > >
> > > Dennis
> > >
> > > Jatin Nansi wrote:
> > > > Hi Max / Dennis,
> > > >
> > > > Actually it is not a shell problem.
> > > >
> > > > i am just not able to understand why every single gnustep app
> > > > gives me one error ie:
> > > >
> > > > Apr 05 19:01:46 GWorkspace[2879] NSApplication.m:192 Assertion
> > > > failed in initialize_gnustep_backend. Unable to load backend,
> > > > aborting Uncaught exception NSInternalInconsistencyException, reason:
> > > > NSApplication.m:192 Assertion failed in initialize_gnustep_backend.
> > > > Unable to load backend, aborting
> > > >
> > > > i am sure that i run the env init script (GNUstep.sh). and i am
> > > > positive i followed every step in the install guides.
> > > >
> > > > i am doing this on a suse 7.3.
> > > >
> > > > Versions:
> > > > GNU Make version 3.79.1
> > > > GNU ld 2.11.90.0.29
> > > > iconv (GNU libc) 2.2.4
> > > > gcc --version: 3.0.4
> > > > ffcall: ffcall-1.8d
> > > > gmp: 3.1.1
> > > > Guile 1.4
> > > > OpenSSL 0.9.6b [engine] 9 Jul 2001
> > > > LIBTIFF, Version 3.5.5
> > > > libxml: 2.4.3
> > > > DGS: not installed.
> > > >
> > > > GNUStep: Latest from ftp.openstep.org (20020405).
> > > >
> > > > Thing is everything is installed beautifully, not 1 error.
> > > > i am thinking that maybe my xinitrc (as per the guide, the link for
> > > > which doesn't work/i got my copy after googling from gnustep.net)
> > > > is incorrect, but i verified that it works ok.
> > > > another thing is that the gdnc and gpbs binaries register themselves
> > > > with the gdomap after appending the hostname.
> > > > so when i do gdomap -L GDNCServer , i get zilch,
> > > > but gdomap -L GDNCServer-jatinnansi finds the service/daemon
> > > > (which1?).
> > > >
> > > > it may also be that the ~/.xinitrc does something wrong. So could u
> > > > send me a working copy?
> > > >
> > > > is there any other binary i am to run (other than gdomap, gdnc and
> > > > gpbs)? something that inits the backend?
> > > >
> > > > Other than that and after already compiling twice,
> > > > i m running out of ideas.
> > > >
> > > > I am also attaching the ~/.xinitrc if it helps,
> > > >
> > > > Thanks
> > > >
> > > > Jatin
> > > >
> > > > On Friday 05 April 2002 18:05, Dennis Leeuw wrote:
> > > > > This morning I did a clean CVS install from GNUstep and GWorkspace
> > > > > and it all works fine.
> > > > > I used my own build guide http://www.made-it.com/GNUstep/Build
> > > > >
> > > > > Could you indicate what is different from the description(s) given
> > > > > in the Guide on your system?
> > > > > BTW I use Debian Woody
> > > > >
> > > > > Greetings,
> > > > >
> > > > > Dennis Leeuw
> > > > >
> > > > > Jatin Nansi wrote:
> > > > > > Hi,
> > > > > >
> > > > > > I am using bash2. I am still facing the problem. whenever i do
> > > > > >
> > > > > > jatin@jatinnansi:/misc2/jatin/> openapp GWorkspace.app
> > > > > >
> > > > > > i get:
> > > > > >
> > > > > > Apr 05 18:15:40 GWorkspace[1233] NSApplication.m:192 Assertion
> > > > > > failed in initialize_gnustep_backend. Unable to load backend,
> > > > > > aborting Uncaught exception NSInternalInconsistencyException,
> > > > > > reason: NSApplication.m:192 Assertion failed in
> > > > > > initialize_gnustep_backend. Unable to load backend, aborting
> > > > > >
> > > > > > so how do i init the backend?
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Jatin
> > > > > >
> > > > > > On Friday 05 April 2002 17:41, M. Grabert wrote:
> > > > > > > On Fri, 5 Apr 2002, Jatin Nansi wrote:
> > > > > > > > On Thursday 04 April 2002 20:11, Luis Garcia Alanis wrote:
> > > > > > > > > Have you loaded your GNUstep env?
> > > > > > > > >
> > > > > > > > > Example
> > > > > > > > > . /usr/local/GNUstep/System/Makefiles/GNUstep.sh
> > > > > > > > >
> > > > > > > > > and do not tyr openapp GWorkspace try openapp
> > > > > > > > > GWorkspace.app instead
> > > > > > >
> > > > > > > And use csh, tcsh, sh or bash to load GNUstep.(c)sh.
> > > > > > >
> > > > > > > At least zsh-4.0.4 fails to set the LD_LIBRARY_PATH right
> > > > > > > (on my debian system). In $GNUSTEP_MAKEFILES/ld_lib_path.sh
> > > > > > > the variable IFS is not handled correctly (or just ignored).
> > > > > > >
> > > > > > >
> > > > > > > greetings max
>
> _______________________________________________
> Discuss-gnustep mailing list
> Discuss-gnustep@gnu.org
> http://mail.gnu.org/mailman/listinfo/discuss-gnustep
- Re: How to work in GNUStep?, (continued)
- Re: How to work in GNUStep?, Jatin Nansi, 2002/04/05
- Re: How to work in GNUStep?, M. Grabert, 2002/04/05
- Re: How to work in GNUStep?, Jatin Nansi, 2002/04/05
- Re: How to work in GNUStep?, Dennis Leeuw, 2002/04/05
- Re: How to work in GNUStep?, M. Grabert, 2002/04/05
- FreeBSD/zsh and ld_lib_path.sh, M. Grabert, 2002/04/05
- Re: How to work in GNUStep?, Jatin Nansi, 2002/04/05
- Re: How to work in GNUStep?, Dennis Leeuw, 2002/04/05
- Re: How to work in GNUStep?, Jatin Nansi, 2002/04/05
- Re: How to work in GNUStep?, Dennis Leeuw, 2002/04/05
- Re: How to work in GNUStep?,
Jatin Nansi <=
- Re: How to work in GNUStep?, Björn Gohla, 2002/04/05
- Re: How to work in GNUStep?, Jatin Nansi, 2002/04/06
- Re: How to work in GNUStep?, Pete French, 2002/04/05