Re: NSDateFormatter SetDateStyle / setTimeStyle not working

[Edwin Ancaer]

Stefan,

I did, and the test returns the same wrong results:

2017-09-14 17:26:09.914 DateFormatter[80496:100318] the date as date object             2017-09-14 17:26:09 +0200
2017-09-14 17:26:09.953 DateFormatter[80496:100318] Dateformatter defaults
2017-09-14 17:26:09.970 DateFormatter[80496:100318]   DateFormatter timezone: Europe/Brussels
2017-09-14 17:26:09.986 DateFormatter[80496:100318]   DateFormatter locale: nl_BE
2017-09-14 17:26:10.003 DateFormatter[80496:100318]   DateFormatter datestyle: 0
2017-09-14 17:26:10.020 DateFormatter[80496:100318]   DateFormatter timestyle: 0
2017-09-14 17:26:10.023 DateFormatter[80496:100318]   Date formatted with defaults 20170914 05:26 p.m.
2017-09-14 17:26:10.027 DateFormatter[80496:100318] DateFormatter: Date -> NoStyle, Time -> MediumStyle
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter timezone: Europe/Brussels
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter locale: nl_BE
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter datestyle: 0
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter timestyle: 2
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   Date formatted with style 20170914 05:26 p.m.
2017-09-14 17:26:10.028 DateFormatter[80496:100318] DateFormatter: Date -> LongStyle, Time -> LongStyle
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter timezone: Europe/Brussels
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter locale: nl_BE
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter datestyle: 3
2017-09-14 17:26:10.028 DateFormatter[80496:100318]   DateFormatter timestyle: 3

2017-09-14 17:26:10.028 DateFormatter[80496:100318]   Date formatted with style 20170914 05:26 p.m.

Could i run a C-program that formatted the date with locale nl and conclude
  - the problem is in my ICU installation if the result of the program is wrong?

 -  the problem is in my GNUstep installation if the result of the program is OK?

Kind regards

2017-09-14 17:05 GMT+02:00 Stefan Bidigaray <stefanbidi@gmail.com>:

Hi Edwin,

From everything you've said so far, the problem doesn't seem to be in GNUstep. The method you are using would return nil if ICU wasn't installed. Additionally, the return value is what you'd expect from the en_US_POSIX locale, the default in FreeBSD.

With that in mind, have you tried explicitly setting the formatter's locale using the -setLocale: method? It's possible your setup is falling back to the systemLocale, which would be a separate problem.

Have you tried running the test I attached in my previous email?

Regards

On Sep 14, 2017 10:38, "Edwin Ancaer" <eancaer@gmail.com> wrote:

Hello,

I return from holidays that have been haunted by this problem :-).

I asked about libicudata.so on the freebsd list. The answer was " devel/icu is built --with-data-packaging=archive which means the data ends up in icudt* file e.g.,

$ pkg info -l icu | fgrep icudt | xargs du -Ah
 25M    /usr/local/share/icu/58.2/icudt58l.dat"

We compared the necessary ICU libraries and they all are present at my side, with more or less equal sizes.

In the config.log file for gnustep base, I found:
...
HAVE_GNUTLS='1'
HAVE_ICU='1'
HAVE_INET_NTOP='yes'
HAVE_INET_PTON='yes'
HAVE_LIBDISPATCH='1'
HAVE_LIBXML='1'
HAVE_LIBXSLT='1'
HAVE_MDNS='0'
HAVE_OBJC_SYNC_ENTER='yes'
...

This seems to indicate ICU is used. Just to be sure, I added

#if GS_USE_ICU == 1
      NSLog(@" GS USE ICU == 1");
#endif   

to my program, and effectively, the display appeared:

2017-09-14 11:04:41.625 TM1[79500:100088]  GS USE ICU == 1

I tried debugging, but from a recent conversation on this list, it seems I need a port gdb80, that is not present in my FreeBSD 11.0 ports directory  (have got gdb and gdb66).

I must be missing something obvious, but for now, I'm rather stuck. Problems like this make one feel utterly stupid.

Would you have any suggestions left?

(I already reinstalled the icu and gnustep base ports, no errors detected, no change in the result).

Kind regards,

Edwin.

_______________________________________________
Discuss-gnustep mailing list
Discuss-gnustep@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnustep