Hello Sasa,
You should have a look at this ATM module :
https://www.dolistore.com/en/modules/623-CAPM-Pack-for-Dolibarr.html
or at this one from Patas Monkey :
https://www.dolistore.com/en/products-services-or-stock/386-Factory--computer-assisted-manufacturing--CAPM-CAMM--for-Dolibarr.html
(free advertising for them ;-)
)
Best regards
Christophe
Le 17/11/2017 à 18:43, Sasa Ostrouska a
écrit :
Hi all, I would like to
get some opinion on how
would be best to manage my
case
with Dolibarr.
We are nearly staring a
production of a product in our
company and I would like to
know what would be the best way
to manage it with Dolibarr.
We will get a steel profile long
about 5500mm and with certain
weight , I think it will
be about 150-160 kgs.
From this bar we will produce in
normal practice 3 pcs of 1828mm and
will
have a small remaining. The band saw is
about 2mm and we will have to
cut the starting cut, the intermediary
cuts and the closing cut at the end of the
profile. So this will give us 3 pieces of
1828mm and a rest of 8-10mm, about
8mm we will get lost due to the cut.
After we will cut we will have other 3
processes to make a finished product.
- drilling
- punching
- paining
Now I would like to know what would be the best manner
to mange the incoming
profile of 5500mm in entrance and then how we could
calculate the exact cost
of each process and get a total cost of the finished
product ?
I know that Dolibarr have not an module for production and
manufacturing, at leaset I am not aware of one, but would be
nice to hear from others how this could be done in a simple
way.
I was initially thinking of using the functionality of
subproducts or assembly.
Any comments, ideas, etc. ?
Rgds
Saxa
_______________________________________________
Dolibarr-user mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/dolibarr-user
|