Re: [Dragora-users] dragora-installer: Partition detection issues

[Matias Fonzo]

El 2019-11-20 16:42, Michael Siegel escribió:
> Am 20.11.19 um 18:34 schrieb Matias Fonzo:
> > El 2019-11-20 13:05, Michael Siegel escribió:
> > > Am 20.11.19 um 03:13 schrieb Matias Fonzo:
> > >
> > > > I've prepared a new package in case you want to try it:
> > > >
> > > > http://rsync.dragora.org/current/packages/x86_64/tools/dragora-installer-20191119-x86_64+1.tlz
> > > >
> > > >
> > > > http://rsync.dragora.org/current/packages/x86_64/tools/dragora-installer-20191119-x86_64+1.tlz.sha256
> > >
> > > Thanks!
> > >
> > > But this won't really work on a 32-bit system, right? Unfortunately, 
> > > I
> > > don't have a 64-bit machine available for testing, at the moment.
> >
> > I thought you were going to test it for x86_64.  Packages for i586 are
> > also available:
> >
> > http://rsync.dragora.org/current/packages/i586/tools/dragora-installer-20191119-i586+1.tlz
> >
> > http://rsync.dragora.org/current/packages/i586/tools/dragora-installer-20191119-i586+1.tlz.sha256
>
> Ah, okay. Should have had a look into the i586 directory...
>
> Now, I booted the Dragora live system from a CD, then rsync-ed those
> files over from a USB key.
>
> Next, I used fdisk to create the following partition layout on the
> machine's hard drive:
>
> Disk /dev/sda: 74.54 GiB, 80026361856 bytes, 156301488 sectors
> Disk model: SAMSUNG HM080HC
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disklabel type: dos
> Disk identifier: 0xbb7736d2
>
> Device     Boot    Start       End   Sectors  Size Id Type
> /dev/sda1  *        2048  20973567  20971520   10G 83 Linux
> /dev/sda2       20973568  23070719   2097152    1G 82 Linux swap / 
> Solaris
> /dev/sda3       23070720 156301487 133230768 63.5G 83 Linux

Uhm?.  This output does not appear to come from util-linux 2.34 (fdisk).

> Then I ran the updated installer script and got the following error 
> message:
>
>     Linux partitions were not detected.
>
> A Linux partition is required to continue the installation.  You can
> use utilities such as fdisk(8), cfdisk(8) or parted(8) to create at
> least one Linux partition.  Then run `dragora-installer' again.
>
> ^ Return status = 1
>
>
> I don't know why this happens. Maybe I didn't sync the files correctly.
> I used
>
>   rsync -rv usr/ /usr
>   rsync -rv var/ /var
>
> from the USB key that had the directories with the updated files. And 
> as
> far as I could tell from rsync's output as well as looking at the 
> output
> of some ls -l commands, that had all worked as expected.
>
> Any ideas?

What?, no.  You can get the package using wget, rsync, or downloading 
manually, then check the .sha256 to ensure.  Then you can tell to the 
package manager to upgrade the local package:

  qi -u dragora-installer-20111119-i586+1.tlz