emacs-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: master 52b67740d10: Generalise a LAP optimisation rule


From: Joseph Mingrone
Subject: Re: master 52b67740d10: Generalise a LAP optimisation rule
Date: Mon, 03 Apr 2023 14:41:28 -0300
User-agent: Gnus/5.13 (Gnus v5.13)

On Sat, 2023-03-25 at 12:22, Mattias Engdegård <mattiase@acm.org> wrote:

> branch: master
> commit 52b67740d10df8ca539fdc2c7d50283997683141
> Author: Mattias Engdegård <mattiase@acm.org>
> Commit: Mattias Engdegård <mattiase@acm.org>

>     Generalise a LAP optimisation rule

>     * lisp/emacs-lisp/byte-opt.el (byte-optimize-lapcode):
>     Accept (stack-set 1) as equivalent to (discardN-preserve-tos 1) in a
>     rule previously overlooked.  This is usually beneficial in code size
>     and almost always shortens dynamic paths.
> ---
>  lisp/emacs-lisp/byte-opt.el | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

> diff --git a/lisp/emacs-lisp/byte-opt.el b/lisp/emacs-lisp/byte-opt.el
> index 3c7aeb89525..0891ec80beb 100644
> --- a/lisp/emacs-lisp/byte-opt.el
> +++ b/lisp/emacs-lisp/byte-opt.el
> @@ -2765,7 +2765,9 @@ If FOR-EFFECT is non-nil, the return value is assumed 
> to be of no importance."
>                        (or (memq (caar tmp) '(byte-discard byte-discardN))
>                            ;; Make sure we don't hoist a discardN-preserve-tos
>                            ;; that really should be merged or deleted instead.
> -                          (and (eq (caar tmp) 'byte-discardN-preserve-tos)
> +                          (and (or (eq (caar tmp) 
> 'byte-discardN-preserve-tos)
> +                                   (and (eq (caar tmp) 'byte-stack-set)
> +                                        (eql (cdar tmp) 1)))
>                                 (let ((next (cadr tmp)))
>                                   (not (or (memq (car next)
>                                                  '(byte-discardN-preserve-tos

Hello,

This commit causes native compilation builds on FreeBSD to fail with the error

        native-ice ("org/org-plot.el" "block does not end with a branch"...

The full error is below and a link to a complete build log (FreeBSD
package build) is also included.

When the commit is reverted, the build finishes successfully again.

Joe

-l comp -f batch-byte+native-compile org/org-protocol.el
Internal native compiler error: "org/org-plot.el", "block does not end with a 
branch", #s(comp-block-lap bb_8 ((comment "LAP TAG 83") (call helper_unbind_n 
#s(comp-mvar nil nil ((1 . 1)) nil nil nil)) (setimm #s(comp-mvar (t) nil nil 
nil nil 2) make-temp-file) (setimm #s(comp-mvar (t) nil nil nil nil 3) 
"org-plot") (set #s(comp-mvar (t) nil nil nil nil 2) (callref funcall 
#s(comp-mvar (t) nil nil nil nil 2) #s(comp-mvar (t) nil nil nil nil 3))) (call 
record_unwind_protect_excursion) (setimm #s(comp-mvar (t) nil nil nil nil 3) 
org-plot/goto-nearest-table) (set #s(comp-mvar (t) nil nil nil nil 3) (callref 
funcall #s(comp-mvar (t) nil nil nil nil 3))) (setimm #s(comp-mvar (t) nil nil 
nil nil 3) org-table-to-lisp) (set #s(comp-mvar (t) nil nil nil nil 3) (callref 
funcall #s(comp-mvar (t) nil nil nil nil 3))) ...) nil nil nil nil 
#s(hash-table size 65 test eql rehash-size 1.5 rehash-threshold 0.8125 data ()) 
nil nil ...), #<symbol org-plot/gnuplot at 23521>

Error: native-ice ("org/org-plot.el" "block does not end with a branch" 
#s(comp-block-lap bb_8 ((comment "LAP TAG 83") (call helper_unbind_n 
#s(comp-mvar nil nil ((1 . 1)) nil nil nil)) (setimm #s(comp-mvar (t) nil nil 
nil nil 2) make-temp-file) (setimm #s(comp-mvar (t) nil nil nil nil 3) 
"org-plot") (set #s(comp-mvar (t) nil nil nil nil 2) (callref funcall 
#s(comp-mvar (t) nil nil nil nil 2) #s(comp-mvar (t) nil nil nil nil 3))) (call 
record_unwind_protect_excursion) (setimm #s(comp-mvar (t) nil nil nil nil 3) 
org-plot/goto-nearest-table) (set #s(comp-mvar (t) nil nil nil nil 3) (callref 
funcall #s(comp-mvar (t) nil nil nil nil 3))) (setimm #s(comp-mvar (t) nil nil 
nil nil 3) org-table-to-lisp) (set #s(comp-mvar (t) nil nil nil nil 3) (callref 
funcall #s(comp-mvar (t) nil nil nil nil 3))) (call helper_unbind_n 
#s(comp-mvar nil nil ((1 . 1)) nil nil nil)) (setimm #s(comp-mvar (t) nil nil 
nil nil 4) plist-get) (set #s(comp-mvar (t) nil nil nil nil 5) #s(comp-mvar (t) 
nil nil nil nil 0)) (setimm #s(comp-mvar (t) nil nil nil nil 6) :transpose) 
(set #s(comp-mvar (t) nil nil nil nil 4) (callref funcall #s(comp-mvar (t) nil 
nil nil nil 4) #s(comp-mvar (t) nil nil nil nil 5) #s(comp-mvar (t) nil nil nil 
nil 6))) (set #s(comp-mvar (t) nil nil nil nil 5) #s(comp-mvar (t) nil nil nil 
nil 4)) (setimm #s(comp-mvar (t) nil nil nil nil 6) #s(hash-table size 3 test 
eq rehash-size 1.5 rehash-threshold 0.8125 purecopy t data (y 105 yes 105 t 
105)))) nil nil nil nil #s(hash-table size 65 test eql rehash-size 1.5 
rehash-threshold 0.8125 data ()) nil nil 1 72 nil nil) org-plot/gnuplot)
  mapbacktrace(#f(compiled-function (evald func args flags) #<bytecode 
0x1f7c358ad9aed07c>))
  debug-early-backtrace()
  debug-early(error (native-ice "org/org-plot.el" "block does not end with a 
branch" #s(comp-block-lap :name bb_8 :insns ((comment "LAP TAG 83") (call 
helper_unbind_n #s(comp-mvar :typeset nil :valset nil :range ((1 . 1)) :neg nil 
:id nil :slot nil)) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil 
:neg nil :id nil :slot 2) make-temp-file) (setimm #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 3) "org-plot") (set #s(comp-mvar 
:typeset (t) :valset nil :range nil :neg nil :id nil :slot 2) (callref funcall 
#s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil :slot 2) 
#s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil :slot 3))) 
(call record_unwind_protect_excursion) (setimm #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 3) org-plot/goto-nearest-table) 
(set #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil :slot 3) 
(callref funcall #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id 
nil :slot 3))) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil :neg 
nil :id nil :slot 3) org-table-to-lisp) (set #s(comp-mvar :typeset (t) :valset 
nil :range nil :neg nil :id nil :slot 3) (callref funcall #s(comp-mvar :typeset 
(t) :valset nil :range nil :neg nil :id nil :slot 3))) (call helper_unbind_n 
#s(comp-mvar :typeset nil :valset nil :range ((1 . 1)) :neg nil :id nil :slot 
nil)) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil 
:slot 4) plist-get) (set #s(comp-mvar :typeset (t) :valset nil :range nil :neg 
nil :id nil :slot 5) #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil 
:id nil :slot 0)) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil :neg 
nil :id nil :slot 6) :transpose) (set #s(comp-mvar :typeset (t) :valset nil 
:range nil :neg nil :id nil :slot 4) (callref funcall #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 4) #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 5) #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 6))) (set #s(comp-mvar :typeset 
(t) :valset nil :range nil :neg nil :id nil :slot 5) #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 4)) (setimm #s(comp-mvar :typeset 
(t) :valset nil :range nil :neg nil :id nil :slot 6) #<hash-table eq 3/3 
0x2318babdf>)) :closed nil :in-edges nil :out-edges nil :idom nil :df 
#<hash-table eql 0/65 0x2264de4ed> :post-num nil :final-frame nil :sp 1 :addr 
72 :non-ret-insn nil :no-ret nil) org-plot/gnuplot))
  signal(native-ice ("org/org-plot.el" "block does not end with a branch" 
#s(comp-block-lap :name bb_8 :insns ((comment "LAP TAG 83") (call 
helper_unbind_n #s(comp-mvar :typeset nil :valset nil :range ((1 . 1)) :neg nil 
:id nil :slot nil)) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil 
:neg nil :id nil :slot 2) make-temp-file) (setimm #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 3) "org-plot") (set #s(comp-mvar 
:typeset (t) :valset nil :range nil :neg nil :id nil :slot 2) (callref funcall 
#s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil :slot 2) 
#s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil :slot 3))) 
(call record_unwind_protect_excursion) (setimm #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 3) org-plot/goto-nearest-table) 
(set #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil :slot 3) 
(callref funcall #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id 
nil :slot 3))) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil :neg 
nil :id nil :slot 3) org-table-to-lisp) (set #s(comp-mvar :typeset (t) :valset 
nil :range nil :neg nil :id nil :slot 3) (callref funcall #s(comp-mvar :typeset 
(t) :valset nil :range nil :neg nil :id nil :slot 3))) (call helper_unbind_n 
#s(comp-mvar :typeset nil :valset nil :range ((1 . 1)) :neg nil :id nil :slot 
nil)) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil :id nil 
:slot 4) plist-get) (set #s(comp-mvar :typeset (t) :valset nil :range nil :neg 
nil :id nil :slot 5) #s(comp-mvar :typeset (t) :valset nil :range nil :neg nil 
:id nil :slot 0)) (setimm #s(comp-mvar :typeset (t) :valset nil :range nil :neg 
nil :id nil :slot 6) :transpose) (set #s(comp-mvar :typeset (t) :valset nil 
:range nil :neg nil :id nil :slot 4) (callref funcall #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 4) #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 5) #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 6))) (set #s(comp-mvar :typeset 
(t) :valset nil :range nil :neg nil :id nil :slot 5) #s(comp-mvar :typeset (t) 
:valset nil :range nil :neg nil :id nil :slot 4)) (setimm #s(comp-mvar :typeset 
(t) :valset nil :range nil :neg nil :id nil :slot 6) #<hash-table eq 3/3 
0x2318babdf>)) :closed nil :in-edges nil :out-edges nil :idom nil :df 
#<hash-table eql 0/65 0x2264de4ed> :post-num nil :final-frame nil :sp 1 :addr 
72 :non-ret-insn nil :no-ret nil) org-plot/gnuplot))
  comp--native-compile("org/org-plot.el")
  batch-native-compile()
  batch-byte+native-compile()
  command-line-1(("--eval" "(setq load-prefer-newer t byte-compile-warnings 
'all)" "-l" "comp" "-f" "batch-byte+native-compile" "org/org-plot.el"))
  command-line()
  normal-top-level()

Full FreeBSD package build: 
http://pkg.ftfl.ca/data/14amd64-default/2023-04-03_09h10m05s/logs/errors/emacs-devel-30.0.50.20230403,3.log



reply via email to

[Prev in Thread] Current Thread [Next in Thread]