emacs-diffs
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Emacs-diffs] Changes to emacs/man/gnus.texi


From: Miles Bader
Subject: [Emacs-diffs] Changes to emacs/man/gnus.texi
Date: Sat, 25 Sep 2004 08:28:36 -0400

Index: emacs/man/gnus.texi
diff -c emacs/man/gnus.texi:1.36 emacs/man/gnus.texi:1.37
*** emacs/man/gnus.texi:1.36    Fri Sep 10 21:36:15 2004
--- emacs/man/gnus.texi Sat Sep 25 12:02:03 2004
***************
*** 3013,3023 ****
  the group by putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")}
  into the group parameters for the group.
  
! This can also be used as a group-specific hook function, if you'd like.
! If you want to hear a beep when you enter a group, you could put
! something like @code{(dummy-variable (ding))} in the parameters of that
! group.  @code{dummy-variable} will be set to the result of the
! @code{(ding)} form, but who cares?
  
  @end table
  
--- 3013,3035 ----
  the group by putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")}
  into the group parameters for the group.
  
! This can also be used as a group-specific hook function.  If you want to
! hear a beep when you enter a group, you could put something like
! @code{(dummy-variable (ding))} in the parameters of that group.
! @code{dummy-variable} will be set to the (meaningless) result of the
! @code{(ding)} form.  
! 
! Alternatively, since the VARIABLE becomes local to the group, this
! pattern can be used to temporarily change a hook.  For example, if the
! following is added to a group parameter
! 
! @lisp
! (gnus-summary-prepared-hook
!   '(lambda nil (local-set-key "d" (local-key-binding "n"))))
! @end lisp
! 
! when the group is entered, the 'd' key will not mark the article as
! expired.
  
  @end table
  
***************
*** 5368,5373 ****
--- 5380,5392 ----
  This command understands the process/prefix convention
  (@pxref{Process/Prefix}).
  
+ @item S D e
+ @kindex S D e (Summary)
+ @findex gnus-summary-resend-message-edit
+ 
+ Like the previous command, but will allow you to edit the message as
+ if it were a new message before resending.
+ 
  @item S O m
  @kindex S O m (Summary)
  @findex gnus-uu-digest-mail-forward
***************
*** 9328,9333 ****
--- 9347,9372 ----
  @item gnus-mime-multipart-functions
  Alist of @acronym{MIME} multipart types and functions to handle them.
  
+ @vindex gnus-mime-display-multipart-alternative-as-mixed
+ @item gnus-mime-display-multipart-alternative-as-mixed
+ Display "multipart/alternative" parts as "multipart/mixed".
+ 
+ @vindex gnus-mime-display-multipart-related-as-mixed
+ @item gnus-mime-display-multipart-related-as-mixed
+ Display "multipart/related" parts as "multipart/mixed".
+ 
+ If displaying "text/html" is discouraged, see
+ @code{mm-discouraged-alternatives} in @ref{Display Customization,
+ Display Customization, , emacs-mime, Emacs-Mime Manual}.  Images or
+ other material inside a "multipart/related" part might be overlooked
+ when this variable is nil.
+ 
+ @vindex gnus-mime-display-multipart-as-mixed
+ @item gnus-mime-display-multipart-as-mixed
+ Display "multipart" parts as "multipart/mixed".  If t, it overrides nil
+ values of @code{gnus-mime-display-multipart-alternative-as-mixed} and
+ @code{gnus-mime-display-multipart-related-as-mixed}.
+ 
  @vindex mm-file-name-rewrite-functions
  @item mm-file-name-rewrite-functions
  List of functions used for rewriting file names of @acronym{MIME} parts.
***************
*** 9424,9429 ****
--- 9463,9472 ----
  @cindex coding system aliases
  @cindex preferred charset
  
+ @xref{Encoding Customization, , Encoding Customization, emacs-mime,
+ The Emacs MIME Manual}, for additional variables that control which
+ MIME charsets are used when sending messages.
+ 
  Other charset tricks that may be useful, although not Gnus-specific:
  
  If there are several @acronym{MIME} charsets that encode the same Emacs
***************
*** 10136,10146 ****
  @vindex gnus-newsgroup-variables
  @item gnus-newsgroup-variables
  A list of newsgroup (summary buffer) local variables, or cons of
! variables and their default values (when the default values are not
! @code{nil}), that should be made global while the summary buffer is
! active.  These variables can be used to set variables in the group
! parameters while still allowing them to affect operations done in
! other buffers.  For example:
  
  @lisp
  (setq gnus-newsgroup-variables
--- 10179,10197 ----
  @vindex gnus-newsgroup-variables
  @item gnus-newsgroup-variables
  A list of newsgroup (summary buffer) local variables, or cons of
! variables and their default expressions to be evalled (when the default
! values are not @code{nil}), that should be made global while the summary
! buffer is active.
! 
! Note: The default expressions will be evaluated (using function
! @code{eval}) before assignment to the local variable rather than just
! assigned to it.  If the default expression is the symbol @code{global},
! that symbol will not be evaluated but the global value of the local
! variable will be used instead.
! 
! These variables can be used to set variables in the group parameters
! while still allowing them to affect operations done in other
! buffers.  For example:
  
  @lisp
  (setq gnus-newsgroup-variables
***************
*** 10149,10154 ****
--- 10200,10206 ----
   "^From:\\|^Newsgroups:\\|^Subject:\\|^Date:\\|^To:")))
  @end lisp
  
+ Also @pxref{Group Parameters}.
  @end table
  
  
***************
*** 11269,11277 ****
  @vindex gnus-article-mode-line-format
  @item gnus-article-mode-line-format
  This variable is a format string along the same lines as
! @code{gnus-summary-mode-line-format} (@pxref{Mode Line Formatting}).  It
! accepts the same format specifications as that variable, with two
! extensions:
  
  @table @samp
  
--- 11321,11329 ----
  @vindex gnus-article-mode-line-format
  @item gnus-article-mode-line-format
  This variable is a format string along the same lines as
! @code{gnus-summary-mode-line-format} (@pxref{Summary Buffer Mode
! Line}).  It accepts the same format specifications as that variable,
! with two extensions:
  
  @table @samp
  
***************
*** 13203,13209 ****
  that haven't been matched by any of the other regexps.  (These rules are
  processed from the beginning of the alist toward the end.  The first
  rule to make a match will ``win'', unless you have crossposting enabled.
! In that case, all matching rules will ``win''.)
  
  If you like to tinker with this yourself, you can set this variable to a
  function of your choice.  This function will be called without any
--- 13255,13263 ----
  that haven't been matched by any of the other regexps.  (These rules are
  processed from the beginning of the alist toward the end.  The first
  rule to make a match will ``win'', unless you have crossposting enabled.
! In that case, all matching rules will ``win''.)  When new groups are
! created by splitting mail, you may want to run
! @code{gnus-group-find-new-groups} to see the new groups.
  
  If you like to tinker with this yourself, you can set this variable to a
  function of your choice.  This function will be called without any
***************
*** 13771,13780 ****
  
  @item mail-source-directory
  @vindex mail-source-directory
! Directory where files (if any) will be stored.  The default is
! @file{~/Mail/}.  At present, the only thing this is used for is to say
! where the incoming files will be stored if the previous variable is
! @code{nil}.
  
  @item mail-source-incoming-file-prefix
  @vindex mail-source-incoming-file-prefix
--- 13825,13834 ----
  
  @item mail-source-directory
  @vindex mail-source-directory
! Directory where incoming mail source files (if any) will be stored.  The
! default is @file{~/Mail/}.  At present, the only thing this is used for
! is to say where the incoming files will be stored if the variable
! @code{mail-source-delete-incoming} is @code{nil} or a number.
  
  @item mail-source-incoming-file-prefix
  @vindex mail-source-incoming-file-prefix
***************
*** 18624,18630 ****
  
  @example
  #!/bin/sh
! emacs -batch -l ~/.emacs -f -l ~/.gnus.el gnus-agent-batch >/dev/null 2>&1
  @end example
  
  
--- 18678,18684 ----
  
  @example
  #!/bin/sh
! emacs -batch -l ~/.emacs -l ~/.gnus.el gnus-agent-batch >/dev/null 2>&1
  @end example
  
  




reply via email to

[Prev in Thread] Current Thread [Next in Thread]