[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/lispref/vol1.texi,v
|
From: |
Karl Berry |
|
Subject: |
[Emacs-diffs] Changes to emacs/lispref/vol1.texi,v |
|
Date: |
Wed, 13 Jun 2007 00:34:46 +0000 |
CVSROOT: /sources/emacs
Module name: emacs
Changes by: Karl Berry <karl> 07/06/13 00:34:45
Index: vol1.texi
===================================================================
RCS file: /sources/emacs/emacs/lispref/vol1.texi,v
retrieving revision 1.11
retrieving revision 1.12
diff -u -b -r1.11 -r1.12
--- vol1.texi 16 Jan 2007 03:28:53 -0000 1.11
+++ vol1.texi 13 Jun 2007 00:34:45 -0000 1.12
@@ -1,213 +1,130 @@
-This file is obsolete, and no longer part of the Emacs Lisp Reference Manual.
-It is still present in CVS in case we ever want to use some of it again.
-
address@hidden This is part of the GNU Emacs Lisp Reference Manual.
+\input texinfo @c -*-texinfo-*-
address@hidden This file is used for printing the GNU Emacs Lisp Reference
Manual
address@hidden in two volumes. It is a modified version of elisp.texi.
@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2001,
@c 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
address@hidden See the file elisp.texi for copying conditions.
-
-\input texinfo @c -*-texinfo-*-
@c %**start of header
@setfilename elisp
@settitle GNU Emacs Lisp Reference Manual: Volume 1
address@hidden
@c %**end of header
-
address@hidden
-%%%% Experiment with smaller skip before sections and subsections.
-%%%% --rjc 30mar92
-
-\global\secheadingskip = 17pt plus 6pt minus 3pt
-\global\subsecheadingskip = 14pt plus 6pt minus 3pt
-
-% The defaults are:
-% \secheadingskip = 21pt plus 8pt minus 4pt
-% \subsecheadingskip = 17pt plus 8pt minus 4pt
address@hidden tex
-
address@hidden
address@hidden tex
address@hidden \overfullrule=0pt
address@hidden end tex
-
address@hidden Start volume 1 chapter numbering on chapter 1;
address@hidden this must be listed as chapno 0.
address@hidden See two-volume-cross-refs.txt.
@tex
+\message{Formatting for two volume edition...Volume 1...}
+%
+% Read special toc file, set up in two-volume.make.
+\gdef\tocreadfilename{elisp1-toc-ready.toc}
+%
+% Don't make outlines, they're not needed and \readdatafile can't pay
+% attention to the special definition above.
+\global\let\pdfmakeoutlines=\relax
+%
+% Start volume 1 chapter numbering at 1; this must be listed as chapno0.
\global\chapno=0
@end tex
address@hidden ================================================================
address@hidden Note: I was unable to figure out how to get .aux files copied
address@hidden properly in the time I had. Hence need to copy .aux file before
address@hidden running Tex. --rjc
address@hidden Version of the manual and of Emacs.
address@hidden Please remember to update the edition number in README as well.
address@hidden VERSION 2.9
address@hidden EMACSVER 22.0.99
+
address@hidden Emacs
address@hidden
+* Elisp: (elisp). The Emacs Lisp Reference Manual.
address@hidden direntry
+
address@hidden in general, keep the following line commented out, unless doing a
address@hidden copy of this manual that will be published. the manual should go
address@hidden onto the distribution in the full, 8.5 x 11" size.
address@hidden smallbook
address@hidden
address@hidden smallbook
address@hidden
address@hidden ifset
-\message{}
-\message{Redefining contents commands...}
-\message{}
-
-% Special @contents command
-
-% This inputs fixed up table of contents file rather than create new one.
-\global\def\contents{%
- \startcontents{Table of Contents}%
- \input elisp1-toc-ready.toc
- \endgroup
- \vfill \eject
-}
-
-% Special @summarycontents command
-% This inputs fixed up table of contents file rather than create new one.
-\global\def\summarycontents{%
- \startcontents{Short Contents}%
- %
- \let\chapentry = \shortchapentry
- \let\unnumbchapentry = \shortunnumberedentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
- \rm
- \advance\baselineskip by 1pt % Open it up a little.
- \def\secentry ##1##2##3##4{}
- \def\unnumbsecentry ##1##2{}
- \def\subsecentry ##1##2##3##4##5{}
- \def\unnumbsubsecentry ##1##2{}
- \def\subsubsecentry ##1##2##3##4##5##6{}
- \def\unnumbsubsubsecentry ##1##2{}
- \input elisp1-toc-ready.toc
- \endgroup
- \vfill \eject
-}
-
-\message{}
-\message{Formatting special two volume edition...Volume 1...}
-\message{}
address@hidden per rms and peterb, use 10pt fonts for the main text, mostly to
address@hidden save on paper cost.
address@hidden Do this inside @tex for now, so current makeinfo does not
complain.
address@hidden
address@hidden smallbook
address@hidden 10
address@hidden EMACSVER 22
+\global\let\urlcolor=\Black % don't print links in grayscale
+\global\let\linkcolor=\Black
address@hidden ifset
+\global\hbadness=6666 % don't worry about not-too-underfull boxes
@end tex
address@hidden ================================================================
-
-
address@hidden ==> This `elisp-small.texi' is a `smallbook' version of the
manual.
-
address@hidden ==== Following are acceptable over and underfull hboxes in TeX
====
-
address@hidden -----
address@hidden [163] [164] [165] [166]) (loading.texi Chapter 13 [167] [168]
[169]
address@hidden Overfull \hbox (20.5428pt too wide) in paragraph at lines
131--131
address@hidden address@hidden
address@hidden setenv EMAC-SLOAD-PATH
.:/user/bil/emacs:/usr/local/lib/emacs/lisp[]
address@hidden -----
address@hidden (minibuf.texi Chapter 17 [206] [207] [208] [209] [210] [211]
[212] [213]
address@hidden [214] [215]
address@hidden Overfull \hbox (2.09094pt too wide) in paragraph at lines
550--560
address@hidden @texttt map[] @textrm if @textsl require-match @textrm is
address@hidden @texttt address@hidden , or else with the keymap @texttt
minibuffer-
address@hidden -----
address@hidden (locals.texi Appendix @char 68 [533] [534]
address@hidden Underfull \hbox (badness 2512) in paragraph at lines 4--4
address@hidden address@hidden Appendix DStandard Buffer-Local
-
address@hidden
-------------------------------------------------------------------
address@hidden
@c Combine indices.
@synindex cp fn
@syncodeindex vr fn
@syncodeindex ky fn
@syncodeindex pg fn
address@hidden tp fn
address@hidden oops: texinfo-format-buffer ignores synindex
address@hidden
-
address@hidden
-This file documents GNU Emacs Lisp.
-
address@hidden The edition number appears in several places in this file
address@hidden and also in the file intro.texi.
-This is edition 2.4 of the GNU Emacs Lisp Reference
-Manual. It corresponds to Emacs Version 19.29.
address@hidden Please REMEMBER to update edition number in *four* places in
this file
address@hidden and also in *one* place in ==> intro.texi <==
address@hidden huh? i only found three real places where the edition is
stated, and
address@hidden one place where it is not stated explicitly ("this info file is
newer
address@hidden than the foobar edition"). --mew 13sep93
-
-Published by the Free Software Foundation
-51 Franklin Street, Fifth Floor
-Boston, MA 02110-1301 USA
address@hidden ifinfo
-
address@hidden odd
-
address@hidden
address@hidden The GNU Emacs Lisp Reference Manual: Volume 1
address@hidden iftex
address@hidden We use the "type index" to index new functions and variables.
address@hidden @syncodeindex tp fn
+
address@hidden
+This is edition @value{VERSION} of the GNU Emacs Lisp Reference Manual,@*
+corresponding to Emacs version @value{EMACSVER}.
+
+Copyright @copyright{} 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,
+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
+Foundation, Inc.
+
address@hidden
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being ``GNU General Public License,'' with the
+Front-Cover texts being ``A GNU Manual,'' and with the Back-Cover
+Texts as in (a) below. A copy of the license is included in the
+section entitled ``GNU Free Documentation License.''
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
address@hidden quotation
address@hidden copying
+
@titlepage
address@hidden 1
address@hidden @titlefont{The}
address@hidden 1
address@hidden @titlefont{GNU Emacs Lisp}
address@hidden 1
address@hidden @titlefont{Reference Manual}
address@hidden 2
address@hidden GNU Emacs Version 19.29
address@hidden for Unix Users
address@hidden 1
address@hidden Edition 2.4, June 1995
address@hidden 2
address@hidden @titlefont{Volume 1}
address@hidden 3
address@hidden by Bil Lewis, Dan LaLiberte,
address@hidden and the GNU Manual Group
address@hidden GNU Emacs Lisp Reference Manual
address@hidden Volume 1
address@hidden For Emacs Version @value{EMACSVER}
address@hidden Revision @value{VERSION}, June 2007
+
address@hidden by Bil Lewis, Dan LaLiberte, Richard Stallman
address@hidden and the GNU Manual Group
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1990, 1991, 1992, 1993, 1994, 1995 Free Software
Foundation, Inc.
address@hidden
@sp 2
-Edition 2.4 @*
-Revised for Emacs Version 19.29,@*
-June, address@hidden
address@hidden 2
-ISBN 1-882114-71-X
address@hidden 2
Published by the Free Software Foundation @*
-51 Franklin Street, Fifth Floor @*
-Boston, MA 02110-1301 USA
-
address@hidden 1
-Permission is granted to make and distribute verbatim copies of this
-manual provided the copyright notice and this permission notice are
-preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included
-exactly as in the original, and provided that the entire resulting
-derived work is distributed under the terms of a permission notice
-identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
+51 Franklin St, Fifth Floor @*
+Boston, MA 02110-1301 @*
+USA @*
+ISBN 1-882114-74-4
@sp 2
Cover art by Etienne Suvasa.
@end titlepage
address@hidden
address@hidden Top, Copying, (dir), (dir)
address@hidden
-This Info file contains edition 2.4 of the GNU Emacs Lisp Reference
-Manual, corresponding to GNU Emacs version 19.29.
address@hidden ifinfo
address@hidden Print the tables of contents
address@hidden
address@hidden
+
+
address@hidden
address@hidden Top, Introduction, (dir), (dir)
address@hidden Emacs Lisp
+
+This Info file contains edition @value{VERSION} of the GNU Emacs Lisp
+Reference Manual, corresponding to GNU Emacs version @value{EMACSVER}.
address@hidden ifnottex
@menu
-* Copying:: Conditions for copying and changing GNU Emacs.
* Introduction:: Introduction and conventions used.
* Lisp Data Types:: Data types of objects in Emacs Lisp.
@@ -217,6 +134,7 @@
* Sequences Arrays Vectors:: Lists, strings and vectors are called sequences.
Certain functions act on any kind of sequence.
The description of vectors is here as well.
+* Hash Tables:: Very fast lookup-tables.
* Symbols:: Symbols represent names, uniquely.
* Evaluation:: How Lisp expressions are evaluated.
@@ -225,9 +143,11 @@
* Functions:: A function is a Lisp program
that can be invoked from other functions.
* Macros:: Macros are a way to extend the Lisp language.
+* Customization:: Writing customization declarations.
* Loading:: Reading files of Lisp code into Lisp.
* Byte Compilation:: Compilation makes programs run faster.
+* Advising Functions:: Adding to the definition of a function.
* Debugging:: Tools and tips for debugging Lisp programs.
* Read and Print:: Converting Lisp objects to text and back.
@@ -243,36 +163,51 @@
files are made.
* Buffers:: Creating and using buffer objects.
* Windows:: Manipulating windows and displaying buffers.
-* Frames:: Making multiple X windows.
+* Frames:: Making multiple system-level windows.
* Positions:: Buffer positions and motion functions.
* Markers:: Markers represent positions and update
automatically when the text is changed.
* Text:: Examining and changing text in buffers.
+* Non-ASCII Characters:: Non-ASCII text in buffers and strings.
* Searching and Matching:: Searching buffers for strings or regexps.
* Syntax Tables:: The syntax table controls word and list parsing.
* Abbrevs:: How Abbrev mode works, and its data structures.
* Processes:: Running and communicating with subprocesses.
+* Display:: Features for controlling the screen display.
* System Interface:: Getting the user id, system type, environment
variables, and other such things.
-* Display:: Parameters controlling screen usage.
- The bell. Waiting for input.
Appendices
-* Tips:: Advice for writing Lisp programs.
+* Antinews:: Info for users downgrading to Emacs 21.
+* GNU Free Documentation License:: The license for this documentation
+* GPL:: Conditions for copying and changing GNU Emacs.
+* Tips:: Advice and coding conventions for Emacs Lisp.
* GNU Emacs Internals:: Building and dumping Emacs;
internal data structures.
* Standard Errors:: List of all error symbols.
-* Standard Buffer-Local Variables:: List of variables local in all buffers.
+* Standard Buffer-Local Variables::
+ List of variables buffer-local in all buffers.
* Standard Keymaps:: List of standard keymaps.
* Standard Hooks:: List of standard hook variables.
* Index:: Index including concepts, functions, variables,
and other terms.
address@hidden
+* New Symbols:: New functions and variables in Emacs
@value{EMACSVER}.
address@hidden ignore
+
address@hidden Do NOT modify the following 3 lines! They must have this form to
address@hidden be correctly identified by `texinfo-multiple-files-update'. In
address@hidden particular, the detailed menu header line MUST be identical to
the
address@hidden value of `texinfo-master-menu-header'. See texnfo-upd.el.
+
address@hidden
--- The Detailed Node Listing ---
+ ---------------------------------
Here are other nodes that are inferiors of those already listed,
mentioned here so you can get to them in one step:
@@ -282,6 +217,7 @@
* Caveats:: Flaws and a request for help.
* Lisp History:: Emacs Lisp is descended from Maclisp.
* Conventions:: How the manual is formatted.
+* Version Info:: Which Emacs version is running?
* Acknowledgements:: The authors, editors, and sponsors of this manual.
Conventions
@@ -296,8 +232,10 @@
Format of Descriptions
-* A Sample Function Description::
-* A Sample Variable Description::
+* A Sample Function Description:: A description of an imaginary
+ function, @code{foo}.
+* A Sample Variable Description:: A description of an imaginary
+ variable, @code{electric-future-map}.
Lisp Data Types
@@ -305,6 +243,7 @@
* Comments:: Comments and their formatting conventions.
* Programming Types:: Types found in all Lisp systems.
* Editing Types:: Types specific to Emacs.
+* Circular Objects:: Read syntax for circular structure.
* Type Predicates:: Tests related to types.
* Equality Predicates:: Tests of equality between any two objects.
@@ -314,13 +253,16 @@
* Floating Point Type:: Numbers with fractional parts and with a large range.
* Character Type:: The representation of letters, numbers and
control characters.
+* Symbol Type:: A multi-use object that refers to a function,
+ variable, property list, or itself.
* Sequence Type:: Both lists and arrays are classified as sequences.
* Cons Cell Type:: Cons cells, and lists (which are made from cons cells).
* Array Type:: Arrays include strings and vectors.
* String Type:: An (efficient) array of characters.
* Vector Type:: One-dimensional arrays.
-* Symbol Type:: A multi-use object that refers to a function,
- variable, property list, or itself.
+* Char-Table Type:: One-dimensional sparse arrays indexed by characters.
+* Bool-Vector Type:: One-dimensional arrays of @code{t} or @code{nil}.
+* Hash Table Type:: Super-fast lookup tables.
* Function Type:: A piece of executable code you can call from elsewhere.
* Macro Type:: A method of expanding an expression into another
expression, more fundamental but less pretty.
@@ -329,21 +271,39 @@
* Autoload Type:: A type used for automatically loading seldom-used
functions.
-List Type
+Character Type
+
+* Basic Char Syntax:: Syntax for regular characters.
+* General Escape Syntax:: How to specify characters by their codes.
+* Ctl-Char Syntax:: Syntax for control characters.
+* Meta-Char Syntax:: Syntax for meta-characters.
+* Other Char Bits:: Syntax for hyper-, super-, and alt-characters.
+Cons Cell and List Types
+
+* Box Diagrams:: Drawing pictures of lists.
* Dotted Pair Notation:: An alternative syntax for lists.
* Association List Type:: A specially constructed list.
+String Type
+
+* Syntax for Strings:: How to specify Lisp strings.
+* Non-ASCII in Strings:: International characters in strings.
+* Nonprinting Characters:: Literal unprintable characters in strings.
+* Text Props and Strings:: Strings with text properties.
+
Editing Types
* Buffer Type:: The basic object of editing.
-* Window Type:: What makes buffers visible.
-* Window Configuration Type::Save what the screen looks like.
* Marker Type:: A position in a buffer.
+* Window Type:: What makes buffers visible.
+* Frame Type:: Windows subdivide frames.
+* Window Configuration Type:: Recording the way a frame is subdivided.
+* Frame Configuration Type:: Recording the status of all frames.
* Process Type:: A process running on the underlying OS.
* Stream Type:: Receive or send characters.
* Keymap Type:: What function a keystroke invokes.
-* Syntax Table Type:: What a character means.
+* Overlay Type:: How an overlay is represented.
Numbers
@@ -351,9 +311,10 @@
* Float Basics:: Representation and range of floating point.
* Predicates on Numbers:: Testing for numbers.
* Comparison of Numbers:: Equality and inequality predicates.
+* Numeric Conversions:: Converting float to integer and vice versa.
* Arithmetic Operations:: How to add, subtract, multiply and divide.
+* Rounding Operations:: Explicitly rounding floating point numbers.
* Bitwise Operations:: Logical and, or, not, shifting.
-* Numeric Conversions:: Converting float to integer and vice
versa.
* Math Functions:: Trig, exponential and logarithmic functions.
* Random Numbers:: Obtaining random integers, predictable or not.
@@ -362,21 +323,24 @@
* String Basics:: Basic properties of strings and characters.
* Predicates for Strings:: Testing whether an object is a string or char.
* Creating Strings:: Functions to allocate new strings.
+* Modifying Strings:: Altering the contents of an existing string.
* Text Comparison:: Comparing characters or strings.
-* String Conversion:: Converting characters or strings and vice versa.
-* Formatting Strings:: @code{format}: Emacs's analog of @code{printf}.
-* Character Case:: Case conversion functions.
+* String Conversion:: Converting characters to strings and vice versa.
+* Formatting Strings:: @code{format}: Emacs's analogue of @code{printf}.
+* Case Conversion:: Case conversion functions.
+* Case Tables:: Customizing case conversion.
Lists
* Cons Cells:: How lists are made out of cons cells.
-* Lists as Boxes:: Graphical notation to explain lists.
* List-related Predicates:: Is this object a list? Comparing two lists.
* List Elements:: Extracting the pieces of a list.
* Building Lists:: Creating list structure.
+* List Variables:: Modifying lists stored in variables.
* Modifying Lists:: Storing new pieces into an existing list.
* Sets And Lists:: A list can represent a finite mathematical set.
* Association Lists:: A list can represent a finite relation or mapping.
+* Rings:: Managing a fixed-size ring of objects.
Modifying Existing List Structure
@@ -390,7 +354,17 @@
* Sequence Functions:: Functions that accept any kind of sequence.
* Arrays:: Characteristics of arrays in Emacs Lisp.
* Array Functions:: Functions specifically for arrays.
-* Vectors:: Functions specifically for vectors.
+* Vectors:: Special characteristics of Emacs Lisp vectors.
+* Vector Functions:: Functions specifically for vectors.
+* Char-Tables:: How to work with char-tables.
+* Bool-Vectors:: How to work with bool-vectors.
+
+Hash Tables
+
+* Creating Hash:: Functions to create hash tables.
+* Hash Access:: Reading and writing the hash table contents.
+* Defining Hash:: Defining new comparison methods
+* Other Hash:: Miscellaneous.
Symbols
@@ -401,19 +375,28 @@
* Property Lists:: Each symbol has a property list
for recording miscellaneous information.
+Property Lists
+
+* Plists and Alists:: Comparison of the advantages of property
+ lists and association lists.
+* Symbol Plists:: Functions to access symbols' property lists.
+* Other Plists:: Accessing property lists stored elsewhere.
+
Evaluation
* Intro Eval:: Evaluation in the scheme of things.
-* Eval:: How to invoke the Lisp interpreter explicitly.
* Forms:: How various sorts of objects are evaluated.
* Quoting:: Avoiding evaluation (to put constants in
the program).
+* Eval:: How to invoke the Lisp interpreter explicitly.
Kinds of Forms
* Self-Evaluating Forms:: Forms that evaluate to themselves.
* Symbol Forms:: Symbols evaluate as variables.
* Classifying Lists:: How to distinguish various sorts of list forms.
+* Function Indirection:: When a symbol appears as the car of a list,
+ we find the real function via the symbol.
* Function Forms:: Forms that call functions.
* Macro Forms:: Forms that call macros.
* Special Forms:: "Special forms" are idiosyncratic primitives,
@@ -424,7 +407,7 @@
Control Structures
* Sequencing:: Evaluation in textual order.
-* Conditionals:: @code{if}, @code{cond}.
+* Conditionals:: @code{if}, @code{cond}, @code{when}, @code{unless}.
* Combining Conditions:: @code{and}, @code{or}, @code{not}.
* Iteration:: @code{while} loops.
* Nonlocal Exits:: Jumping out of a sequence.
@@ -443,6 +426,7 @@
* Processing of Errors:: What Emacs does when you report an error.
* Handling Errors:: How you can trap errors and continue execution.
* Error Symbols:: How errors are classified for trapping them.
+* Standard Errors:: List of all error symbols.
Variables
@@ -451,11 +435,21 @@
* Local Variables:: Variable values that exist only temporarily.
* Void Variables:: Symbols that lack values.
* Defining Variables:: A definition says a symbol is used as a variable.
+* Tips for Defining:: Things you should think about when you
+ define a variable.
* Accessing Variables:: Examining values of variables whose names
are known only at run time.
* Setting Variables:: Storing new values in variables.
* Variable Scoping:: How Lisp chooses among local and global values.
* Buffer-Local Variables:: Variable values in effect only in one buffer.
+* Frame-Local Variables:: Variable values in effect only in one frame.
+* Future Local Variables:: New kinds of local values we might add some day.
+* File Local Variables:: Handling local variable lists in files.
+* Variable Aliases:: Variables that are aliases for other variables.
+* Variables with Restricted Values:: Non-constant variables whose value can
+ @emph{not} be an arbitrary Lisp object.
+* Standard Buffer-Local Variables::
+ List of variables buffer-local in all buffers.
Scoping Rules for Variable Bindings
@@ -471,7 +465,7 @@
* Intro to Buffer-Local:: Introduction and concepts.
* Creating Buffer-Local:: Creating and destroying buffer-local bindings.
* Default Value:: The default value is seen in buffers
- that don't have their own local values.
+ that don't have their own buffer-local values.
Functions
@@ -484,6 +478,9 @@
* Anonymous Functions:: Lambda-expressions are functions with no names.
* Function Cells:: Accessing or setting the function definition
of a symbol.
+* Obsolete Functions:: Declaring functions obsolete.
+* Inline Functions:: Defining functions that the compiler will open code.
+* Function Safety:: Determining whether a function is safe to call.
* Related Topics:: Cross-references to specific Lisp primitives
that have a special bearing on how
functions work.
@@ -504,30 +501,86 @@
* Backquote:: Easier construction of list structure.
* Problems with Macros:: Don't evaluate the macro arguments too many times.
Don't hide the user's variables.
+* Indenting Macros:: Specifying how to indent macro calls.
+
+Common Problems Using Macros
+
+* Wrong Time:: Do the work in the expansion, not in the macro.
+* Argument Evaluation:: The expansion should evaluate each macro arg once.
+* Surprising Local Vars:: Local variable bindings in the expansion
+ require special care.
+* Eval During Expansion:: Don't evaluate them; put them in the expansion.
+* Repeated Expansion:: Avoid depending on how many times expansion is done.
+
+Writing Customization Definitions
+
+* Common Keywords:: Common keyword arguments for all kinds of
+ customization declarations.
+* Group Definitions:: Writing customization group definitions.
+* Variable Definitions:: Declaring user options.
+* Customization Types:: Specifying the type of a user option.
+
+Customization Types
+
+* Simple Types:: Simple customization types: sexp, integer, number,
+ string, file, directory, alist.
+* Composite Types:: Build new types from other types or data.
+* Splicing into Lists:: Splice elements into list with @code{:inline}.
+* Type Keywords:: Keyword-argument pairs in a customization type.
+* Defining New Types:: Give your type a name.
Loading
* How Programs Do Loading:: The @code{load} function and others.
+* Load Suffixes:: Details about the suffixes that @code{load} tries.
+* Library Search:: Finding a library to load.
+* Loading Non-ASCII:: address@hidden characters in Emacs Lisp files.
* Autoload:: Setting up a function to autoload.
-* Named Features:: Loading a library if it isn't already loaded.
* Repeated Loading:: Precautions about loading a file twice.
+* Named Features:: Loading a library if it isn't already loaded.
+* Where Defined:: Finding which file defined a certain symbol.
+* Unloading:: How to "unload" a library that was loaded.
+* Hooks for Loading:: Providing code to be run when
+ particular libraries are loaded.
Byte Compilation
+* Speed of Byte-Code:: An example of speedup from byte compilation.
* Compilation Functions:: Byte compilation functions.
+* Docs and Compilation:: Dynamic loading of documentation strings.
+* Dynamic Loading:: Dynamic loading of individual functions.
+* Eval During Compile:: Code to be evaluated when you compile.
+* Compiler Errors:: Handling compiler error messages.
+* Byte-Code Objects:: The data type used for byte-compiled functions.
* Disassembly:: Disassembling byte-code; how to read byte-code.
+Advising Emacs Lisp Functions
+
+* Simple Advice:: A simple example to explain the basics of advice.
+* Defining Advice:: Detailed description of @code{defadvice}.
+* Around-Advice:: Wrapping advice around a function's definition.
+* Computed Advice:: ...is to @code{defadvice} as @code{fset} is to
@code{defun}.
+* Activation of Advice:: Advice doesn't do anything until you activate it.
+* Enabling Advice:: You can enable or disable each piece of advice.
+* Preactivation:: Preactivation is a way of speeding up the
+ loading of compiled advice.
+* Argument Access in Advice:: How advice can access the function's arguments.
+* Advising Primitives:: Accessing arguments when advising a primitive.
+* Combined Definition:: How advice is implemented.
+
Debugging Lisp Programs
* Debugger:: How the Emacs Lisp debugger is implemented.
+* Edebug:: A source-level Emacs Lisp debugger.
* Syntax Errors:: How to find syntax errors.
+* Test Coverage:: Ensuring you have tested all branches in your code.
* Compilation Errors:: How to find errors that show up in
byte compilation.
-* Edebug:: A source-level Emacs Lisp debugger.
The Lisp Debugger
* Error Debugging:: Entering the debugger when an error happens.
+* Infinite Loops:: Stopping and debugging a program that doesn't exit.
* Function Debugging:: Entering it when a certain function is called.
* Explicit Debug:: Entering it at a certain point in the program.
* Using Debugger:: What the debugger does; what you see while in it.
@@ -535,6 +588,27 @@
* Invoking the Debugger:: How to call the function @code{debug}.
* Internals of Debugger:: Subroutines of the debugger, and global variables.
+Edebug
+
+* Using Edebug:: Introduction to use of Edebug.
+* Instrumenting:: You must instrument your code
+ in order to debug it with Edebug.
+* Edebug Execution Modes:: Execution modes, stopping more or less often.
+* Jumping:: Commands to jump to a specified place.
+* Edebug Misc:: Miscellaneous commands.
+* Breaks:: Setting breakpoints to make the program stop.
+* Trapping Errors:: Trapping errors with Edebug.
+* Edebug Views:: Views inside and outside of Edebug.
+* Edebug Eval:: Evaluating expressions within Edebug.
+* Eval List:: Expressions whose values are displayed
+ each time you enter Edebug.
+* Printing in Edebug:: Customization of printing.
+* Trace Buffer:: How to produce trace output in a buffer.
+* Coverage Testing:: How to test evaluation coverage.
+* The Outside Context:: Data that Edebug saves and restores.
+* Edebug and Macros:: Specifying how to handle macro calls.
+* Edebug Options:: Option variables for customizing Edebug.
+
Debugging Invalid Lisp Syntax
* Excess Open:: How to find a spurious open paren or missing close.
@@ -549,14 +623,25 @@
* Output Streams:: Various data types that can be used as
output streams.
* Output Functions:: Functions to print Lisp objects as text.
+* Output Variables:: Variables that control what the printing
+ functions do.
Minibuffers
* Intro to Minibuffers:: Basic information about minibuffers.
* Text from Minibuffer:: How to read a straight text string.
* Object from Minibuffer:: How to read a Lisp object or expression.
+* Minibuffer History:: Recording previous minibuffer inputs
+ so the user can reuse them.
+* Initial Input:: Specifying initial contents for the minibuffer.
* Completion:: How to invoke and customize completion.
* Yes-or-No Queries:: Asking a question with a simple answer.
+* Multiple Queries:: Asking a series of similar questions.
+* Reading a Password:: Reading a password from the terminal.
+* Minibuffer Commands:: Commands used as key bindings in minibuffers.
+* Minibuffer Contents:: How such commands access the minibuffer text.
+* Minibuffer Windows:: Operating on the special minibuffer windows.
+* Recursive Mini:: Whether recursive entry to minibuffer is allowed.
* Minibuffer Misc:: Various customization hooks and variables.
Completion
@@ -576,8 +661,10 @@
* Defining Commands:: Specifying how a function should read arguments.
* Interactive Call:: Calling a command, so that it will read arguments.
* Command Loop Info:: Variables set by the command loop for you to examine.
+* Adjusting Point:: Adjustment of point after a command.
* Input Events:: What input looks like when you read it.
* Reading Input:: How to read input events from the keyboard or mouse.
+* Special Events:: Events processed immediately and individually.
* Waiting:: Waiting for user input or elapsed time.
* Quitting:: How @kbd{C-g} works. How to catch or defer quitting.
* Prefix Command Arguments:: How the commands to set prefix args work.
@@ -594,50 +681,155 @@
in various ways.
* Interactive Examples:: Examples of how to read interactive arguments.
+Input Events
+
+* Keyboard Events:: Ordinary characters--keys with symbols on them.
+* Function Keys:: Function keys--keys with names, not symbols.
+* Mouse Events:: Overview of mouse events.
+* Click Events:: Pushing and releasing a mouse button.
+* Drag Events:: Moving the mouse before releasing the button.
+* Button-Down Events:: A button was pushed and not yet released.
+* Repeat Events:: Double and triple click (or drag, or down).
+* Motion Events:: Just moving the mouse, not pushing a button.
+* Focus Events:: Moving the mouse between frames.
+* Misc Events:: Other events the system can generate.
+* Event Examples:: Examples of the lists for mouse events.
+* Classifying Events:: Finding the modifier keys in an event symbol.
+* Accessing Events:: Functions to extract info from events.
+* Strings of Events:: Special considerations for putting
+ keyboard character events in a string.
+
+Reading Input
+
+* Key Sequence Input:: How to read one key sequence.
+* Reading One Event:: How to read just one event.
+* Event Mod:: How Emacs modifies events as they are read.
+* Invoking the Input Method:: How reading an event uses the input method.
+* Quoted Character Input:: Asking the user to specify a character.
+* Event Input Misc:: How to reread or throw away input events.
+
Keymaps
-* Keymap Terminology:: Definitions of terms pertaining to keymaps.
+* Key Sequences:: Key sequences as Lisp objects.
+* Keymap Basics:: Basic concepts of keymaps.
* Format of Keymaps:: What a keymap looks like as a Lisp object.
* Creating Keymaps:: Functions to create and copy keymaps.
* Inheritance and Keymaps:: How one keymap can inherit the bindings
of another keymap.
* Prefix Keys:: Defining a key with a keymap as its definition.
-* Menu Keymaps:: A keymap can define a menu for X
- or for use from the terminal.
-* Active Keymaps:: Each buffer has a local keymap
+* Active Keymaps:: How Emacs searches the active keymaps
+ for a key binding.
+* Searching Keymaps:: A pseudo-Lisp summary of searching active maps.
+* Controlling Active Maps:: Each buffer has a local keymap
to override the standard (global) bindings.
- Each minor mode can also override them.
+ A minor mode can also override them.
* Key Lookup:: How extracting elements from keymaps works.
* Functions for Key Lookup:: How to request key lookup.
* Changing Key Bindings:: Redefining a key in a keymap.
+* Remapping Commands:: A keymap can translate one command to another.
+* Translation Keymaps:: Keymaps for translating sequences of events.
* Key Binding Commands:: Interactive interfaces for redefining keys.
* Scanning Keymaps:: Looking through all keymaps, for printing help.
+* Menu Keymaps:: A keymap can define a menu for X
+ or for use from the terminal.
+* Standard Keymaps:: List of standard keymaps.
Major and Minor Modes
+* Hooks:: How to use hooks; how to write code that
+ provides hooks.
* Major Modes:: Defining major modes.
* Minor Modes:: Defining minor modes.
* Mode Line Format:: Customizing the text that appears in the mode line.
-* Hooks:: How to use hooks; how to write code that
- provides hooks.
+* Imenu:: How a mode can provide a menu
+ of definitions in the buffer.
+* Font Lock Mode:: How modes can highlight text according to syntax.
+* Desktop Save Mode:: How modes can have buffer state saved between
+ Emacs sessions.
+
+Menu Keymaps
+
+* Defining Menus:: How to make a keymap that defines a menu.
+* Mouse Menus:: How users actuate the menu with the mouse.
+* Keyboard Menus:: How users actuate the menu with the keyboard.
+* Menu Example:: Making a simple menu.
+* Menu Bar:: How to customize the menu bar.
+* Tool Bar:: A tool bar is a row of images.
+* Modifying Menus:: How to add new items to a menu.
+
+Defining Menus
+
+* Simple Menu Items:: A simple kind of menu key binding,
+ limited in capabilities.
+* Extended Menu Items:: More powerful menu item definitions
+ let you specify keywords to enable
+ various features.
+* Menu Separators:: Drawing a horizontal line through a menu.
+* Alias Menu Items:: Using command aliases in menu items.
+
+Major and Minor Modes
+
+* Hooks:: How to use hooks; how to write code that provides hooks.
+* Major Modes:: Defining major modes.
+* Minor Modes:: Defining minor modes.
+* Mode Line Format:: Customizing the text that appears in the mode line.
+* Imenu:: How a mode can provide a menu
+ of definitions in the buffer.
+* Font Lock Mode:: How modes can highlight text according to syntax.
+* Desktop Save Mode:: How modes can have buffer state saved between
+ Emacs sessions.
Major Modes
+* Major Mode Basics::
* Major Mode Conventions:: Coding conventions for keymaps, etc.
* Example Major Modes:: Text mode and Lisp modes.
* Auto Major Mode:: How Emacs chooses the major mode automatically.
* Mode Help:: Finding out how to use a mode.
+* Derived Modes:: Defining a new major mode based on another major
+ mode.
+* Generic Modes:: Defining a simple major mode that supports
+ comment syntax and Font Lock mode.
+* Mode Hooks:: Hooks run at the end of major mode functions.
Minor Modes
* Minor Mode Conventions:: Tips for writing a minor mode.
* Keymaps and Minor Modes:: How a minor mode can have its own keymap.
+* Defining Minor Modes:: A convenient facility for defining minor modes.
Mode Line Format
+* Mode Line Basics::
* Mode Line Data:: The data structure that controls the mode line.
* Mode Line Variables:: Variables used in that data structure.
* %-Constructs:: Putting information into a mode line.
+* Properties in Mode:: Using text properties in the mode line.
+* Header Lines:: Like a mode line, but at the top.
+* Emulating Mode Line:: Formatting text as the mode line would.
+
+Font Lock Mode
+
+* Font Lock Basics:: Overview of customizing Font Lock.
+* Search-based Fontification:: Fontification based on regexps.
+* Customizing Keywords:: Customizing search-based fontification.
+* Other Font Lock Variables:: Additional customization facilities.
+* Levels of Font Lock:: Each mode can define alternative levels
+ so that the user can select more or less.
+* Precalculated Fontification:: How Lisp programs that produce the buffer
+ contents can also specify how to fontify it.
+* Faces for Font Lock:: Special faces specifically for Font Lock.
+* Syntactic Font Lock:: Fontification based on syntax tables.
+* Setting Syntax Properties:: Defining character syntax based on context
+ using the Font Lock mechanism.
+* Multiline Font Lock:: How to coerce Font Lock into properly
+ highlighting multiline constructs.
+
+Multiline Font Lock Constructs
+
+* Font Lock Multiline:: Marking multiline chunks with a text property
+* Region to Fontify:: Controlling which region gets refontified
+ after a buffer change.
Documentation
@@ -658,9 +850,13 @@
* File Locks:: Locking and unlocking files, to prevent
simultaneous editing by two people.
* Information about Files:: Testing existence, accessibility, size of files.
-* Contents of Directories:: Getting a list of the files in a directory.
-* Changing File Attributes:: Renaming files, changing protection, etc.
+* Changing Files:: Renaming files, changing protection, etc.
* File Names:: Decomposing and expanding file names.
+* Contents of Directories:: Getting a list of the files in a directory.
+* Create/Delete Dirs:: Creating and Deleting Directories.
+* Magic File Names:: Defining "magic" special handling
+ for certain file names.
+* Format Conversion:: Conversion to and from various file formats.
Visiting Files
@@ -670,19 +866,23 @@
Information about Files
* Testing Accessibility:: Is a given file readable? Writable?
-* Kinds of Files:: Is it a directory? A link?
+* Kinds of Files:: Is it a directory? A symbolic link?
+* Truenames:: Eliminating symbolic links from a file name.
* File Attributes:: How large is it? Any other names? Etc.
+* Locating Files:: How to find a file in standard places.
File Names
* File Name Components:: The directory part of a file name, and the rest.
-* Directory Names:: A directory's name as a directory
- is different from its name as a file.
* Relative File Names:: Some file names are relative to a
current directory.
+* Directory Names:: A directory's name as a directory
+ is different from its name as a file.
* File Name Expansion:: Converting relative file names to absolute ones.
* Unique File Names:: Generating names for temporary files.
* File Name Completion:: Finding the completions for a given file name.
+* Standard File Names:: If your package uses a fixed file name,
+ how to handle various operating systems simply.
Backups and Auto-Saving
@@ -704,19 +904,22 @@
Buffers
* Buffer Basics:: What is a buffer?
+* Current Buffer:: Designating a buffer as current
+ so primitives will access its contents.
* Buffer Names:: Accessing and changing buffer names.
* Buffer File Name:: The buffer file name indicates which file
is visited.
* Buffer Modification:: A buffer is @dfn{modified} if it needs to be saved.
* Modification Time:: Determining whether the visited file was changed
- "behind Emacs's back".
+ ``behind Emacs's back''.
* Read Only Buffers:: Modifying text is not allowed in a
read-only buffer.
* The Buffer List:: How to look at all the existing buffers.
* Creating Buffers:: Functions that create buffers.
* Killing Buffers:: Buffers exist until explicitly killed.
-* Current Buffer:: Designating a buffer as current
- so primitives will access its contents.
+* Indirect Buffers:: An indirect buffer shares text with some
+ other buffer.
+* Buffer Gap:: The gap in the buffer.
Windows
@@ -726,21 +929,28 @@
* Selecting Windows:: The selected window is the one that you edit in.
* Cyclic Window Ordering:: Moving around the existing windows.
* Buffers and Windows:: Each window displays the contents of a buffer.
-* Displaying Buffers:: Higher-lever functions for displaying a buffer
+* Displaying Buffers:: Higher-level functions for displaying a buffer
and choosing a window for it.
+* Choosing Window:: How to choose a window for displaying a buffer.
* Window Point:: Each window has its own location of point.
* Window Start:: The display-start position controls which text
is on-screen in the window.
-* Vertical Scrolling:: Moving text up and down in the window.
-* Horizontal Scrolling:: Moving text sideways on the window.
+* Textual Scrolling:: Moving text up and down through the window.
+* Vertical Scrolling:: Moving the contents up and down on the window.
+* Horizontal Scrolling:: Moving the contents sideways on the window.
* Size of Window:: Accessing the size of a window.
* Resizing Windows:: Changing the size of a window.
+* Coordinates and Windows:: Converting coordinates to windows.
+* Window Tree:: The layout and sizes of all windows in a frame.
* Window Configurations:: Saving and restoring the state of the screen.
+* Window Hooks:: Hooks for scrolling, window size changes,
+ redisplay going past a certain point,
+ or window configuration changes.
Frames
* Creating Frames:: Creating additional frames.
-* Multiple Displays:: Creating frames on other X displays.
+* Multiple Displays:: Creating frames on other displays.
* Frame Parameters:: Controlling frame size, position, font, etc.
* Frame Titles:: Automatic updating of frame titles.
* Deleting Frames:: Frames last until explicitly deleted.
@@ -750,18 +960,40 @@
* Minibuffers and Frames:: How a frame finds the minibuffer to use.
* Input Focus:: Specifying the selected frame.
* Visibility of Frames:: Frames may be visible or invisible, or icons.
-* Raising and Lowering:: Raising a frame makes it hide other X windows;
- lowering it makes the others hide them.
+* Raising and Lowering:: Raising a frame makes it hide other windows;
+ lowering it puts it underneath the others.
* Frame Configurations:: Saving the state of all frames.
* Mouse Tracking:: Getting events that say when the mouse moves.
* Mouse Position:: Asking where the mouse is, or moving it.
* Pop-Up Menus:: Displaying a menu for the user to select from.
* Dialog Boxes:: Displaying a box to ask yes or no.
-* Pointer Shapes:: Specifying the shape of the mouse pointer.
-* X Selections:: Transferring text to and from other X clients.
+* Pointer Shape:: Specifying the shape of the mouse pointer.
+* Window System Selections::Transferring text to and from other windows.
+* Drag and Drop:: Internals of Drag-and-Drop implementation.
* Color Names:: Getting the definitions of color names.
+* Text Terminal Colors:: Defining colors for text-only terminals.
* Resources:: Getting resource values from the server.
-* Server Data:: Getting info about the X server.
+* Display Feature Testing:: Determining the features of a terminal.
+
+Frame Parameters
+
+* Parameter Access:: How to change a frame's parameters.
+* Initial Parameters:: Specifying frame parameters when you make a frame.
+* Window Frame Parameters:: List of frame parameters for window systems.
+* Size and Position:: Changing the size and position of a frame.
+* Geometry:: Parsing geometry specifications.
+
+Window Frame Parameters
+
+* Basic Parameters:: Parameters that are fundamental.
+* Position Parameters:: The position of the frame on the screen.
+* Size Parameters:: Frame's size.
+* Layout Parameters:: Size of parts of the frame, and
+ enabling or disabling some parts.
+* Buffer Parameters:: Which buffers have been or should be shown.
+* Management Parameters:: Communicating with the window manager.
+* Cursor Parameters:: Controlling the cursor appearance.
+* Color Parameters:: Colors of various parts of the frame.
Positions
@@ -785,9 +1017,11 @@
* Overview of Markers:: The components of a marker, and how it relocates.
* Predicates on Markers:: Testing whether an object is a marker.
* Creating Markers:: Making empty markers or markers at certain places.
-* Information from Markers:: Finding the marker's buffer or character
+* Information from Markers::Finding the marker's buffer or character
position.
-* Changing Markers:: Moving the marker to a new buffer or position.
+* Marker Insertion Types:: Two ways a marker can relocate when you
+ insert where it points.
+* Moving Markers:: Moving the marker to a new buffer or position.
* The Mark:: How "the mark" is implemented with a marker.
* The Region:: How to access "the region".
@@ -795,6 +1029,7 @@
* Near Point:: Examining text in the vicinity of point.
* Buffer Contents:: Examining text in a general fashion.
+* Comparing Text:: Comparing substrings of buffers.
* Insertion:: Adding new text to a buffer.
* Commands for Insertion:: User-level commands to insert text.
* Deletion:: Removing text from a buffer.
@@ -802,21 +1037,32 @@
* The Kill Ring:: Where removed text sometimes is saved for
later use.
* Undo:: Undoing changes to the text of a buffer.
-* Auto Filling:: How auto-fill mode is implemented to break lines.
+* Maintaining Undo:: How to enable and disable undo information.
+ How to control how much information is kept.
* Filling:: Functions for explicit filling.
* Margins:: How to specify margins for filling commands.
+* Adaptive Fill:: Adaptive Fill mode chooses a fill prefix
+ from context.
+* Auto Filling:: How auto-fill mode is implemented to break lines.
* Sorting:: Functions for sorting parts of the buffer.
-* Indentation:: Functions to insert or adjust indentation.
* Columns:: Computing horizontal positions, and using them.
+* Indentation:: Functions to insert or adjust indentation.
* Case Changes:: Case conversion of parts of the buffer.
+* Text Properties:: Assigning Lisp property lists to text characters.
* Substitution:: Replacing a given character wherever it appears.
+* Transposition:: Swapping two portions of a buffer.
* Registers:: How registers are implemented. Accessing
the text or position stored in a register.
+* Base 64:: Conversion to or from base 64 encoding.
+* MD5 Checksum:: Compute the MD5 "message digest"/"checksum".
+* Atomic Changes:: Installing several buffer changes "atomically".
+* Change Hooks:: Supplying functions to be run when text is changed.
The Kill Ring
* Kill Ring Concepts:: What text looks like in the kill ring.
* Kill Functions:: Functions that kill text.
+* Yanking:: How yanking is done.
* Yank Commands:: Commands that access the kill ring.
* Low-Level Kill Ring:: Functions and variables for kill ring
access.
* Internals of Kill Ring:: Variables that hold kill-ring data.
@@ -830,48 +1076,130 @@
* Indent Tabs:: Adjustable, typewriter-like tab stops.
* Motion by Indent:: Move to first non-blank character.
+Text Properties
+
+* Examining Properties:: Looking at the properties of one character.
+* Changing Properties:: Setting the properties of a range of text.
+* Property Search:: Searching for where a property changes value.
+* Special Properties:: Particular properties with special meanings.
+* Format Properties:: Properties for representing formatting of text.
+* Sticky Properties:: How inserted text gets properties from
+ neighboring text.
+* Saving Properties:: Saving text properties in files, and reading
+ them back.
+* Lazy Properties:: Computing text properties in a lazy fashion
+ only when text is examined.
+* Clickable Text:: Using text properties to make regions of text
+ do something when you click on them.
+* Links and Mouse-1:: How to make @key{Mouse-1} follow a link.
+* Fields:: The @code{field} property defines
+ fields within the buffer.
+* Not Intervals:: Why text properties do not use
+ Lisp-visible text intervals.
+
+Non-ASCII Characters
+
+* Text Representations:: Unibyte and multibyte representations
+* Converting Representations:: Converting unibyte to multibyte and vice versa.
+* Selecting a Representation:: Treating a byte sequence as unibyte or multi.
+* Character Codes:: How unibyte and multibyte relate to
+ codes of individual characters.
+* Character Sets:: The space of possible character codes
+ is divided into various character sets.
+* Chars and Bytes:: More information about multibyte encodings.
+* Splitting Characters:: Converting a character to its byte sequence.
+* Scanning Charsets:: Which character sets are used in a buffer?
+* Translation of Characters:: Translation tables are used for conversion.
+* Coding Systems:: Coding systems are conversions for saving files.
+* Input Methods:: Input methods allow users to enter various
+ non-ASCII characters without special keyboards.
+* Locales:: Interacting with the POSIX locale.
+
+Coding Systems
+
+* Coding System Basics:: Basic concepts.
+* Encoding and I/O:: How file I/O functions handle coding systems.
+* Lisp and Coding Systems:: Functions to operate on coding system names.
+* User-Chosen Coding Systems:: Asking the user to choose a coding system.
+* Default Coding Systems:: Controlling the default choices.
+* Specifying Coding Systems:: Requesting a particular coding system
+ for a single file operation.
+* Explicit Encoding:: Encoding or decoding text without doing I/O.
+* Terminal I/O Encoding:: Use of encoding for terminal I/O.
+* MS-DOS File Types:: How DOS "text" and "binary" files
+ relate to coding systems.
+
Searching and Matching
* String Search:: Search for an exact match.
+* Searching and Case:: Case-independent or case-significant searching.
* Regular Expressions:: Describing classes of strings.
* Regexp Search:: Searching for a match for a regexp.
-* Match Data:: Finding out which part of the text matched
- various parts of a regexp, after regexp search.
-* Saving Match Data:: Saving and restoring this information.
+* POSIX Regexps:: Searching POSIX-style for the longest match.
+* Match Data:: Finding out which part of the text matched,
+ after a string or regexp search.
+* Search and Replace:: Commands that loop, searching and replacing.
* Standard Regexps:: Useful regexps for finding sentences, pages,...
-* Searching and Case:: Case-independent or case-significant searching.
Regular Expressions
* Syntax of Regexps:: Rules for writing regular expressions.
* Regexp Example:: Illustrates regular expression syntax.
+* Regexp Functions:: Functions for operating on regular expressions.
+
+Syntax of Regular Expressions
+
+* Regexp Special:: Special characters in regular expressions.
+* Char Classes:: Character classes used in regular expressions.
+* Regexp Backslash:: Backslash-sequences in regular expressions.
+
+The Match Data
+
+* Replacing Match:: Replacing a substring that was matched.
+* Simple Match Data:: Accessing single items of match data,
+ such as where a particular subexpression started.
+* Entire Match Data:: Accessing the entire match data at once, as a list.
+* Saving Match Data:: Saving and restoring the match data.
Syntax Tables
+* Syntax Basics:: Basic concepts of syntax tables.
* Syntax Descriptors:: How characters are classified.
* Syntax Table Functions:: How to create, examine and alter syntax tables.
+* Syntax Properties:: Overriding syntax with text properties.
+* Motion and Syntax:: Moving over characters with certain syntaxes.
* Parsing Expressions:: Parsing balanced expressions
using the syntax table.
* Standard Syntax Tables:: Syntax tables used by various major modes.
* Syntax Table Internals:: How syntax table information is stored.
+* Categories:: Another way of classifying character syntax.
Syntax Descriptors
* Syntax Class Table:: Table of syntax classes.
* Syntax Flags:: Additional flags each character can have.
+Parsing Expressions
+
+* Motion via Parsing:: Motion functions that work by parsing.
+* Position Parse:: Determining the syntactic state of a position.
+* Parser State:: How Emacs represents a syntactic state.
+* Low-Level Parsing:: Parsing across a specified region.
+* Control Parsing:: Parameters that affect parsing.
+
Abbrevs And Abbrev Expansion
* Abbrev Mode:: Setting up Emacs for abbreviation.
-* Tables: Abbrev Tables. Creating and working with abbrev tables.
+* Abbrev Tables:: Creating and working with abbrev tables.
* Defining Abbrevs:: Specifying abbreviations and their expansions.
-* Files: Abbrev Files. Saving abbrevs in files.
-* Expansion: Abbrev Expansion. Controlling expansion; expansion subroutines.
+* Abbrev Files:: Saving abbrevs in files.
+* Abbrev Expansion:: Controlling expansion; expansion subroutines.
* Standard Abbrev Tables:: Abbrev tables used by various major modes.
Processes
* Subprocess Creation:: Functions that start subprocesses.
+* Shell Arguments:: Quoting an argument to pass it to a shell.
* Synchronous Processes:: Details of using synchronous subprocesses.
* Asynchronous Processes:: Starting up an asynchronous subprocess.
* Deleting Processes:: Eliminating an asynchronous subprocess.
@@ -881,68 +1209,219 @@
an asynchronous subprocess.
* Output from Processes:: Collecting output from an asynchronous subprocess.
* Sentinels:: Sentinels run when process run-status changes.
+* Query Before Exit:: Whether to query if exiting will kill a process.
+* Transaction Queues:: Transaction-based communication with subprocesses.
* Network:: Opening network connections.
+* Network Servers:: Network servers let Emacs accept net connections.
+* Datagrams:: UDP network connections.
+* Low-Level Network:: Lower-level but more general function
+ to create connections and servers.
+* Misc Network:: Additional relevant functions for network
connections.
+* Byte Packing:: Using bindat to pack and unpack binary data.
Receiving Output from Processes
* Process Buffers:: If no filter, output is put in a buffer.
* Filter Functions:: Filter functions accept output from the process.
+* Decoding Output:: Filters can get unibyte or multibyte strings.
* Accepting Output:: How to wait until process output arrives.
+Low-Level Network Access
+
+* Proc: Network Processes. Using @code{make-network-process}.
+* Options: Network Options. Further control over network connections.
+* Features: Network Feature Testing.
+ Determining which network features work on
+ the machine you are using.
+
+Packing and Unpacking Byte Arrays
+
+* Bindat Spec:: Describing data layout.
+* Bindat Functions:: Doing the unpacking and packing.
+* Bindat Examples:: Samples of what bindat.el can do for you!
+
+Emacs Display
+
+* Refresh Screen:: Clearing the screen and redrawing everything on it.
+* Forcing Redisplay:: Forcing redisplay.
+* Truncation:: Folding or wrapping long text lines.
+* The Echo Area:: Displaying messages at the bottom of the screen.
+* Warnings:: Displaying warning messages for the user.
+* Invisible Text:: Hiding part of the buffer text.
+* Selective Display:: Hiding part of the buffer text (the old way).
+* Temporary Displays:: Displays that go away automatically.
+* Overlays:: Use overlays to highlight parts of the buffer.
+* Width:: How wide a character or string is on the screen.
+* Line Height:: Controlling the height of lines.
+* Faces:: A face defines a graphics style
+ for text characters: font, colors, etc.
+* Fringes:: Controlling window fringes.
+* Scroll Bars:: Controlling vertical scroll bars.
+* Display Property:: Enabling special display features.
+* Images:: Displaying images in Emacs buffers.
+* Buttons:: Adding clickable buttons to Emacs buffers.
+* Abstract Display:: Emacs' Widget for Object Collections.
+* Blinking:: How Emacs shows the matching open parenthesis.
+* Usual Display:: The usual conventions for displaying nonprinting
chars.
+* Display Tables:: How to specify other conventions.
+* Beeping:: Audible signal to the user.
+* Window Systems:: Which window system is being used.
+
+The Echo Area
+
+* Displaying Messages:: Explicitly displaying text in the echo area.
+* Progress:: Informing user about progress of a long operation.
+* Logging Messages:: Echo area messages are logged for the user.
+* Echo Area Customization:: Controlling the echo area.
+
+Reporting Warnings
+
+* Warning Basics:: Warnings concepts and functions to report them.
+* Warning Variables:: Variables programs bind to customize their
warnings.
+* Warning Options:: Variables users set to control display of warnings.
+
+Overlays
+
+* Managing Overlays:: Creating and moving overlays.
+* Overlay Properties:: How to read and set properties.
+ What properties do to the screen display.
+* Finding Overlays:: Searching for overlays.
+
+Faces
+
+* Defining Faces:: How to define a face with @code{defface}.
+* Face Attributes:: What is in a face?
+* Attribute Functions:: Functions to examine and set face attributes.
+* Displaying Faces:: How Emacs combines the faces specified for
+ a character.
+* Font Selection:: Finding the best available font for a face.
+* Face Functions:: How to define and examine faces.
+* Auto Faces:: Hook for automatic face assignment.
+* Font Lookup:: Looking up the names of available fonts
+ and information about them.
+* Fontsets:: A fontset is a collection of fonts
+ that handle a range of character sets.
+
+Fringes
+
+* Fringe Size/Pos:: Specifying where to put the window fringes.
+* Fringe Indicators:: Displaying indicator icons in the window fringes.
+* Fringe Cursors:: Displaying cursors in the right fringe.
+* Fringe Bitmaps:: Specifying bitmaps for fringe indicators.
+* Customizing Bitmaps:: Specifying your own bitmaps to use in the fringes.
+* Overlay Arrow:: Display of an arrow to indicate position.
+
+The @code{display} Property
+
+* Specified Space:: Displaying one space with a specified width.
+* Pixel Specification:: Specifying space width or height in pixels.
+* Other Display Specs:: Displaying an image; magnifying text; moving it
+ up or down on the page; adjusting the width
+ of spaces within text.
+* Display Margins:: Displaying text or images to the side of
+ the main text.
+
+Images
+
+* Image Descriptors:: How to specify an image for use in @code{:display}.
+* XBM Images:: Special features for XBM format.
+* XPM Images:: Special features for XPM format.
+* GIF Images:: Special features for GIF format.
+* PostScript Images:: Special features for PostScript format.
+* Other Image Types:: Various other formats are supported.
+* Defining Images:: Convenient ways to define an image for later use.
+* Showing Images:: Convenient ways to display an image once
+ it is defined.
+* Image Cache:: Internal mechanisms of image display.
+
+Buttons
+
+* Button Properties:: Button properties with special meanings.
+* Button Types:: Defining common properties for classes of buttons.
+* Making Buttons:: Adding buttons to Emacs buffers.
+* Manipulating Buttons:: Getting and setting properties of buttons.
+* Button Buffer Commands:: Buffer-wide commands and bindings for buttons.
+
+Abstract Display
+
+* Abstract Display Functions:: Functions in the Ewoc package.
+* Abstract Display Example:: Example of using Ewoc.
+
+Display Tables
+
+* Display Table Format:: What a display table consists of.
+* Active Display Table:: How Emacs selects a display table to use.
+* Glyphs:: How to define a glyph, and what glyphs mean.
+
Operating System Interface
* Starting Up:: Customizing Emacs start-up processing.
* Getting Out:: How exiting works (permanent or temporary).
* System Environment:: Distinguish the name and kind of system.
-* Terminal Input:: Recording terminal input for debugging.
-* Terminal Output:: Recording terminal output for debugging.
-* Flow Control:: How to turn output flow control on or off.
+* User Identification:: Finding the name and user id of the user.
+* Time of Day:: Getting the current time.
+* Time Conversion:: Converting a time from numeric form to a string, or
+ to calendrical data (or vice versa).
+* Time Parsing:: Converting a time from numeric form to text
+ and vice versa.
+* Processor Run Time:: Getting the run time used by Emacs.
+* Time Calculations:: Adding, subtracting, comparing times, etc.
+* Timers:: Setting a timer to call a function at a certain
time.
+* Idle Timers:: Setting a timer to call a function when Emacs has
+ been idle for a certain length of time.
+* Terminal Input:: Accessing and recording terminal input.
+* Terminal Output:: Controlling and recording terminal output.
+* Sound Output:: Playing sounds on the computer's speaker.
+* X11 Keysyms:: Operating on key symbols for X Windows
* Batch Mode:: Running Emacs without terminal interaction.
+* Session Management:: Saving and restoring state with X Session
Management.
Starting Up Emacs
-* Start-up Summary:: Sequence of actions Emacs performs at start-up.
+* Startup Summary:: Sequence of actions Emacs performs at start-up.
* Init File:: Details on reading the init file (@file{.emacs}).
* Terminal-Specific:: How the terminal-specific Lisp file is read.
-* Command Line Arguments:: How command line arguments are processed,
+* Command-Line Arguments:: How command-line arguments are processed,
and how you can customize them.
-Getting out of Emacs
+Getting Out of Emacs
* Killing Emacs:: Exiting Emacs irreversibly.
* Suspending Emacs:: Exiting Emacs reversibly.
-Emacs Display
+Terminal Input
-* Refresh Screen:: Clearing the screen and redrawing everything on it.
-* Truncation:: Folding or wrapping long text lines.
-* The Echo Area:: Where messages are displayed.
-* Selective Display:: Hiding part of the buffer text.
-* Overlay Arrow:: Display of an arrow to indicate position.
-* Temporary Displays:: Displays that go away automatically.
-* Waiting:: Forcing display update and waiting for user.
-* Blinking:: How Emacs shows the matching open parenthesis.
-* Usual Display:: How control characters are displayed.
-* Beeping:: Audible signal to the user.
-* Window Systems:: Which window system is being used.
+* Input Modes:: Options for how input is processed.
+* Recording Input:: Saving histories of recent or all input events.
+
+Tips and Conventions
+
+* Coding Conventions:: Conventions for clean and robust programs.
+* Key Binding Conventions:: Which keys should be bound by which programs.
+* Programming Tips:: Making Emacs code fit smoothly in Emacs.
+* Compilation Tips:: Making compiled code run fast.
+* Warning Tips:: Turning off compiler warnings.
+* Documentation Tips:: Writing readable documentation strings.
+* Comment Tips:: Conventions for writing comments.
+* Library Headers:: Standard headers for library packages.
GNU Emacs Internals
-* Building Emacs:: How to preload Lisp libraries into Emacs.
+* Building Emacs:: How the dumped Emacs is made.
* Pure Storage:: A kludge to make preloaded Lisp functions sharable.
* Garbage Collection:: Reclaiming space for Lisp objects no longer used.
-* Object Internals:: Data formats of buffers, windows, processes.
+* Memory Usage:: Info about total size of Lisp objects made so far.
* Writing Emacs Primitives:: Writing C code for Emacs.
+* Object Internals:: Data formats of buffers, windows, processes.
Object Internals
* Buffer Internals:: Components of a buffer structure.
* Window Internals:: Components of a window structure.
* Process Internals:: Components of a process structure.
address@hidden detailmenu
@end menu
address@hidden ================ Volume 1 ================
-
@include intro.texi
@include objects.texi
@include numbers.texi
@@ -950,6 +1429,7 @@
@include lists.texi
@include sequences.texi
address@hidden hash.texi
@include symbols.texi
@include eval.texi
@@ -958,36 +1438,40 @@
@include functions.texi
@include macros.texi
address@hidden customize.texi
@include loading.texi
@include compile.texi
address@hidden advice.texi
+
@include debugging.texi
@include streams.texi
-
@include minibuf.texi
@include commands.texi
+
@include keymaps.texi
@include modes.texi
address@hidden help.texi
address@hidden files.texi
address@hidden ================ Beginning of Volume 2 ================
address@hidden backups.texi
address@hidden include help.texi
address@hidden include files.texi
address@hidden include backups.texi
address@hidden ================ Beginning of Volume 2 ================
@c include buffers.texi
-
@c include windows.texi
@c include frames.texi
+
@c include positions.texi
@c include markers.texi
@c include text.texi
address@hidden include nonascii.texi
@c include searching.texi
@c include syntax.texi
@c include abbrevs.texi
-
@c include processes.texi
address@hidden include os.texi
+
@c include display.texi
address@hidden include os.texi
@c MOVE to Emacs Manual: include misc-modes.texi
@@ -995,21 +1479,24 @@
@c REMOVE this: include non-hacker.texi
address@hidden include anti.texi
address@hidden include doclicense.texi
address@hidden include gpl.texi
@c include tips.texi
@c include internals.texi
@c include errors.texi
@c include locals.texi
@c include maps.texi
@c include hooks.texi
address@hidden include anti.texi
address@hidden index-vol1.texi
address@hidden index.texi
address@hidden
address@hidden Print the tables of contents
address@hidden
address@hidden
address@hidden That's all
address@hidden
address@hidden New Symbols, , Index, Top
address@hidden New Symbols Since the Previous Edition
+
address@hidden tp
address@hidden ignore
@bye
- [Emacs-diffs] Changes to emacs/lispref/vol1.texi,v,
Karl Berry <=