[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to pcl-cvs.texi
|
From: |
Glenn Morris |
|
Subject: |
[Emacs-diffs] Changes to pcl-cvs.texi |
|
Date: |
Thu, 06 Sep 2007 04:39:17 +0000 |
CVSROOT: /sources/emacs
Module name: emacs
Changes by: Glenn Morris <gm> 07/09/06 04:39:17
Index: pcl-cvs.texi
===================================================================
RCS file: pcl-cvs.texi
diff -N pcl-cvs.texi
--- pcl-cvs.texi 15 Apr 2007 20:57:15 -0000 1.38
+++ /dev/null 1 Jan 1970 00:00:00 -0000
@@ -1,1443 +0,0 @@
-\input texinfo @c -*-texinfo-*-
address@hidden %**start of header
address@hidden ../info/pcl-cvs
address@hidden PCL-CVS --- Emacs Front-End to CVS
address@hidden vr fn
address@hidden %**end of header
-
address@hidden
-Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
-Foundation, Inc.
-
address@hidden
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.2 or
-any later version published by the Free Software Foundation; with the
-Invariant Sections being ``The GNU Manifesto'', ``Distribution'' and
-``GNU GENERAL PUBLIC LICENSE'', with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
-
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
address@hidden quotation
address@hidden copying
-
address@hidden Emacs
address@hidden
-* PCL-CVS: (pcl-cvs). Emacs front-end to CVS.
address@hidden direntry
-
address@hidden The titlepage section does not appear in the Info file.
address@hidden
address@hidden 4
address@hidden The title is printed in a large font.
address@hidden @titlefont{User's Guide}
address@hidden
address@hidden @titlefont{to}
address@hidden
address@hidden @titlefont{PCL-CVS --- The Emacs Front-End to CVS}
address@hidden
address@hidden 2
address@hidden release 2.9
address@hidden -release-
address@hidden ignore
address@hidden 3
address@hidden Per Cederqvist
address@hidden Stefan Monnier
address@hidden -date-
-
address@hidden The following two commands start the copyright page
address@hidden for the printed manual. This will not appear in the Info file.
address@hidden
address@hidden 0pt plus 1filll
address@hidden
address@hidden titlepage
-
address@hidden ================================================================
address@hidden The real text starts here
address@hidden ================================================================
-
address@hidden Top, About PCL-CVS, (dir), (dir)
address@hidden
address@hidden PCL-CVS
-
-This manual describes PCL-CVS, the GNU Emacs front-end to CVS. It
-is nowhere near complete, so you are advised to use @kbd{M-x
-customize-group RET pcl-cvs @key{RET}} and to look at the documentation strings
-of the various commands and major modes for further information.
address@hidden This manual is updated to release 2.5 of PCL-CVS.
address@hidden ifnottex
-
address@hidden
-* About PCL-CVS:: Credits, history, @dots{}
-
-* Getting started:: An introduction with a walk-through example.
-* Buffer contents:: An explanation of the buffer contents.
-* Selected files:: To which files are commands applied.
-* Commands:: All commands, grouped by type.
-
-* Log Edit Mode:: Major mode to edit log messages.
-* Log View Mode:: Major mode to browse log changes.
address@hidden * CVS Status Mode:: Major mode to view CVS' status
output.
-* Customization:: How you can tailor PCL-CVS to suit your needs.
-* Bugs:: Bugs (known and unknown).
-
-* GNU Free Documentation License:: The license for this documentation.
-* Function and Variable Index:: List of functions and variables.
-* Concept Index:: List of concepts.
-* Key Index:: List of keystrokes.
-
address@hidden
- --- The Detailed Node Listing ---
-
-About PCL-CVS
-
-* Contributors:: Contributors to PCL-CVS.
-
-Commands
-
-* Entering PCL-CVS:: Commands to invoke PCL-CVS
-* Setting flags:: Setting flags for CVS commands
-* Updating the buffer::
-* Movement commands:: How to move up and down in the buffer
-* Marking files:: How to mark files that other commands
- will later operate on.
-* Committing changes:: Checking in your modifications to the
- CVS repository.
-* Editing files:: Loading files into Emacs.
-* Getting info about files:: Display the log and status of files.
-* Adding and removing files:: Adding and removing files
-* Undoing changes:: Undoing changes
-* Removing handled entries:: Uninteresting lines can easily be removed.
-* Ignoring files:: Telling CVS to ignore generated files.
-* Viewing differences:: Commands to @samp{diff} different versions.
-* Invoking Ediff:: Running @samp{ediff} from @samp{*cvs*} buffer.
-* Updating files:: Updating files that Need-update.
-* Tagging files:: Tagging files.
-* Miscellaneous commands:: Miscellaneous commands.
-
-Customization
-
-* Customizing Faces::
-
address@hidden detailmenu
address@hidden menu
-
address@hidden About PCL-CVS, Getting started, Top, Top
address@hidden About PCL-CVS
address@hidden About PCL-CVS
-
-PCL-CVS is a front-end to CVS versions 1.9 and later.
-It concisely shows the present status of a checked out module in an
-Emacs buffer and provides single-key access to the most frequently used CVS
-commands.
-For Emacs users accustomed to VC, PCL-CVS can be thought of as a replacement
-for VC-dired (@pxref{VC Dired Mode, , Dired under VC, emacs, The GNU
-Emacs Manual}) specifically designed for CVS.
-
-PCL-CVS was originally written many years ago by Per Cederqvist who
-proudly maintained it until January 1996, at which point he released the
-beta version 2.0b2 and passed on the maintainership to Greg A Woods.
-Development stayed mostly dormant for a few years during which
-version 2.0 never seemed to be able to leave the ``beta'' stage while a
-separate XEmacs version was slowly splitting away. In late 1998,
-Stefan Monnier picked up development again, adding some major new
-functionality and taking over the maintenance.
-
address@hidden
-* Contributors:: Contributors to PCL-CVS.
address@hidden menu
-
address@hidden Contributors,, About PCL-CVS, About PCL-CVS
address@hidden Contributors to PCL-CVS
address@hidden Contributors
address@hidden Authors
-
-Contributions to the package are welcome. I have limited time to work
-on this project, but I will gladly add any code that you contribute to
-me to this package (@pxref{Bugs}).
-
-The following persons have made contributions to PCL-CVS.
-
address@hidden @bullet
address@hidden
-Brian Berliner wrote CVS, together with some other contributors.
-Without his work on CVS this package would be address@hidden
-
address@hidden
-Per Cederqvist wrote most of the otherwise unattributed functions in
-PCL-CVS as well as all the documentation.
-
address@hidden
address@hidden@@lysator.liu.se, Inge Wallin} wrote the skeleton of
address@hidden, and gave useful comments on it. He also wrote
-the files @file{elib-node.el} and @file{compile-all.el}. The file
address@hidden was inspired by address@hidden
-
address@hidden
address@hidden@@lysator.liu.se, Linus Tolke} contributed useful comments
-on both the functionality and the address@hidden
-
address@hidden
address@hidden@@jwz.com, Jamie Zawinski} contributed
address@hidden, which was later renamed to
address@hidden@refill
-
address@hidden
-Leif Lonnblad contributed RCVS support (since superseded by the new
-remote CVS support).
-
address@hidden
address@hidden@@cyclic.com, Jim Blandy} contributed hooks to automatically
-guess CVS log entries from @file{ChangeLog} contents, and initial support of
-the new Cygnus / Cyclic remote CVS, as well as various sundry bug fixes
-and cleanups.
-
address@hidden
address@hidden@@cyclic.com, Jim Kingdon} contributed lots of fixes to
-the build and installation procedure.
-
address@hidden
address@hidden@@weird.com, Greg A.@: Woods} contributed code to implement
-the use of per-file diff buffers, and vendor join diffs with emerge and
-ediff, as well as various and sundry bug fixes and cleanups.
-
address@hidden
address@hidden@@alum.mit.edu, Greg Klanderman} implemented
-toggling of marked files, setting of CVS command flags via prefix
-arguments, updated the XEmacs support, updated the manual, and fixed
-numerous bugs.
-
address@hidden
address@hidden@@cs.yale.edu, Stefan Monnier} added a slew of other
-features and introduced even more new bugs. If there's any bug left,
-you can be sure it's his.
-
address@hidden
address@hidden wordy to avoid an underfull hbox
address@hidden@@is.aist-nara.ac.jp, Masatake YAMATO} made a gracious
-contribution of his cvstree code to display a tree of tags which was later
-superseded by the new @code{cvs-status-mode}.
address@hidden itemize
-
-Apart from these, a lot of people have sent us suggestions, ideas,
-requests, bug reports and encouragement. Thanks a lot! Without you
-there would be no new releases of PCL-CVS.
-
-
address@hidden Getting started, Buffer contents, About PCL-CVS, Top
address@hidden Getting started
address@hidden Introduction
address@hidden Example run
address@hidden Sample session
-
-This document assumes that you know what CVS is, and that you at least
-know the fundamental concepts of CVS. If that is not the case, you
-should read the CVS documentation. Type @kbd{info -f cvs} or @kbd{man
-cvs}.
-
-PCL-CVS is only useful once you have checked out a module. So before
-you invoke it, you must have a copy of a module somewhere in the file
-system.
-
-You can invoke PCL-CVS by typing @kbd{M-x cvs-examine @key{RET}}.
-You can also invoke it via the menu bar, under @samp{Tools}.
-Or, if you prefer, you can also invoke PCL-CVS by simply visiting the
-CVS administrative subdirectory of your module, with a prefix argument.
-For example, to invoke PCL-CVS in a separate frame, type @kbd{C-u C-x 5
-f ~/my/project/CVS @key{RET}}.
-
-The function @code{cvs-examine} will ask for a directory. The command
address@hidden -n update} will be run in that directory. (It should contain
-files that have been checked out from a CVS archive.) The output from
address@hidden will be parsed and presented in a table in a buffer called
address@hidden It might look something like this:
-
address@hidden
-Repository : /usr/CVSroot
-Module : test
-Working dir: /users/ceder/FOO/test
-
-
-In directory .:
- Need-Update bar
- Need-Update file.txt
- Modified namechange
- Need-Update newer
-In directory sub:
- Modified ChangeLog
-
---------------------- End ---------------------
--- last cmd: cvs -f -z6 -n update -d -P --
address@hidden example
-
-In this example, your repository is in @file{/usr/CVSroot} and CVS has
-been run in the directory @file{/users/ceder/FOO/test}. The three files
-(@file{bar}, @file{file.txt} and
address@hidden) that are marked with @samp{Need-Update} have been changed
-by someone else in the CVS repository. Two files (@file{namechange}
-and @file{sub/ChangeLog}) have been modified locally, and need to be
-checked in.
-
-You can move the cursor up and down in the buffer with @kbd{C-n} and
address@hidden or @kbd{n} and @kbd{p}. If you press @kbd{c} on one of the
address@hidden files, that file will be checked in to the CVS
-repository. @xref{Committing changes}. You can also press @kbd{O} to
-update any of the files that are marked @samp{Need-Update}. You can
-also run @kbd{M-x cvs-update @key{RET}} (bound to @kbd{M-u} in the
address@hidden buffer) to update all the address@hidden
-
-You can then press @kbd{=} to easily get a @samp{diff} between your
-modified file and the base version that you started from, or you can
-press @kbd{l} to get the output from @samp{cvs log}. Many more such
-commands are available simply by pressing a key (@pxref{Getting info
-about files}).
-
address@hidden Buffer contents, Selected files, Getting started, Top
address@hidden Buffer contents
address@hidden Buffer contents
address@hidden @code{*cvs*} buffer contents
-
-The display contains several columns, some of which are optional.
-These columns are, from left to right:
-
address@hidden @bullet
-
address@hidden
-Optionally, the head revision of the file. This is the latest version
-found in the repository. It might also contain (instead of the head
-revision) a sub status which typically gives further information about
-how we got to the current state, for example @samp{patched},
address@hidden, @dots{}
-
address@hidden
-An asterisk when the file is @dfn{marked} (@pxref{Selected
-files})address@hidden
-
address@hidden
-The actual status of the file wrt the repository. See below.
-
address@hidden
-Optionally, the base revision of the file. This is the version
-which the copy in your working directory is based upon.
-
address@hidden
-The file name.
-
address@hidden itemize
-
-The @samp{file status} field can have the following values:
-
address@hidden @samp
address@hidden Modified
-The file is modified in your working directory, and there was no
-modification to the same file in the repository. This status can have
-the following substatus:
-
address@hidden @samp
address@hidden merged
-The file was modified in your working directory, and there were
-modifications in the repository as well, but they were merged
-successfully, without conflict, in your working address@hidden
address@hidden table
-
address@hidden Conflict
-A conflict was detected while trying to merge your changes to @var{file}
-with changes from the repository. @var{file} (the copy in your
-working directory) is now the output of the @code{rcsmerge} command on
-the two versions; an unmodified copy of your file is also in your
-working directory, with the name @address@hidden@var{version}},
-where @var{version} is the RCS revision that your modified file started
-from. @xref{Viewing differences}, for more address@hidden
-
-A conflict can also come from a disagreement on the existence of the file
-rather than on its content. This case is indicated by the following
-possible substatus:
-
address@hidden @samp
address@hidden removed
-The file is locally removed but a new revision has been committed to
-the repository by someone else.
-
address@hidden added
-The file is locally added and has also been added to the repository
-by someone else.
-
address@hidden modified
-The file is locally modified but someone else has removed it from the
-repository.
address@hidden table
-
address@hidden Added
-The file has been added by you, but it still needs to be checked in to
-the address@hidden
-
address@hidden Removed
-The file has been removed by you, but it still needs to be checked in to
-the repository. You can resurrect it by typing @kbd{a} (@pxref{Adding
-and removing files})address@hidden
-
address@hidden Unknown
-A file that was detected in your directory, but that neither appears in
-the repository, nor is present on the list of files that CVS should
address@hidden
-
address@hidden Up-to-date
-The file is up to date with respect to the version in the repository.
-This status can have a substatus of:
-
address@hidden @samp
address@hidden added
-You have just added the file to the address@hidden
-
address@hidden updated
-The file was brought up to date with respect to the repository. This is
-done for any file that exists in the repository but not in your source,
-and for files that you haven't changed but are not the most recent
-versions available in the address@hidden
-
address@hidden patched
-The file was brought up to date with respect to the remote repository by
-way of fetching and applying a patch to the file in your source. This
-is equivalent to @samp{updated} except that CVS decided to use a hopefully
-more efficient address@hidden
-
address@hidden committed
-You just committed the address@hidden
address@hidden table
-
address@hidden Need-Update
-Either a newer version than the one in your source is available in the
-repository and you have not modified your checked out version, or the
-file exists in the repository but not in your source. Use
address@hidden bound to @kbd{O} to update the address@hidden
-
address@hidden Need-Merge
-You have modified the checked out version of the file, and a newer
-version is available in the repository. A merge will take place when
-you run a @samp{cvs-update}.
-
address@hidden Missing
-The file has been unexpectedly removed from your working directory
-although it has not been @samp{cvs remove}d.
address@hidden table
-
address@hidden Selected files, Commands, Buffer contents, Top
address@hidden Selected files
address@hidden Selected files
address@hidden Marked files
address@hidden File selection
address@hidden Active files
address@hidden Applicable
-
-Many of the commands work on the current set of @dfn{selected} files
-which can be either the set of marked files (if any file is marked and
-marks are not ignored) or whichever file or directory the cursor is on.
-
-If a directory is selected but the command cannot be applied to a
-directory, then it will be applied to the set of files under this
-directory which are in the @samp{*cvs*} buffer.
-
address@hidden cvs-mode-force-command
address@hidden cvs-allow-dir-commit
-Furthermore, each command only operates on a subset of the selected
-files, depending on whether or not the command is @dfn{applicable} to
-each file (based on the file's status). For example,
address@hidden is not applicable to a file whose status is
address@hidden If it should happen that PCL-CVS guesses the
-applicability wrong, you can override it with the special prefix
address@hidden normally bound to @kbd{M-f} (and file a
-bug report). The applicability rule can be slightly changed with
address@hidden and @code{cvs-force-dir-tag}.
-
-By default, marks are always in effect (you may change this, however, by
-setting the variable @code{cvs-default-ignore-marks}) except for the
-commands that @samp{tag} or @samp{diff} a file (which can be changed
-with the variable @code{cvs-invert-ignore-marks}).
-
-In addition, you may use the special prefix @code{cvs-mode-toggle-marks}
-normally bound to @key{T} to toggle the use of marks for the following
-command.
-
-This scheme might seem a little complicated, but once one gets used to
-it, it is quite powerful.
-
-For commands to mark and unmark files, see @ref{Marking files}.
-
address@hidden Commands, Log Edit Mode, Selected files, Top
address@hidden Commands
-
address@hidden
-This chapter describes all the commands that you can use in PCL-CVS.
address@hidden iftex
address@hidden
-The nodes in this menu contains explanations about all the commands that
-you can use in PCL-CVS. They are grouped together by type.
address@hidden ifnottex
-
address@hidden
-* Entering PCL-CVS:: Commands to invoke PCL-CVS
-* Setting flags:: Setting flags for CVS commands
-* Updating the buffer::
-* Movement commands:: How to move up and down in the buffer
-* Marking files:: How to mark files that other commands
- will later operate on.
-* Committing changes:: Checking in your modifications to the
- CVS repository.
-* Editing files:: Loading files into Emacs.
-* Getting info about files:: Display the log and status of files.
-* Adding and removing files:: Adding and removing files
-* Undoing changes:: Undoing changes
-* Removing handled entries:: Uninteresting lines can easily be removed.
-* Ignoring files:: Telling CVS to ignore generated files.
-* Viewing differences:: Commands to @samp{diff} different versions.
-* Invoking Ediff:: Running @samp{ediff} from @samp{*cvs*} buffer.
-* Updating files:: Updating files that Need-update.
-* Tagging files:: Tagging files.
-* Miscellaneous commands:: Miscellaneous commands.
address@hidden menu
-
-
address@hidden Entering PCL-CVS, Setting flags, Commands, Commands
address@hidden Entering PCL-CVS
address@hidden cvs-update
address@hidden cvs-examine
address@hidden cvs-status
address@hidden cvs-checkout
address@hidden cvs-quickdir
address@hidden Creating the *cvs* buffer
-
-Most commands in PCL-CVS require that you have a @samp{*cvs*}
-buffer. The commands that you use to get one are listed below.
-For each, a @samp{cvs} process will be run, the output will be parsed by
-PCL-CVS, and the result will be printed in the @samp{*cvs*} buffer (see
address@hidden contents}, for a description of the buffer's contents).
-
address@hidden @kbd
address@hidden M-x cvs-update
-Run a @samp{cvs update} command. You will be asked for the directory
-in which the @samp{cvs update} will be run.
-
address@hidden M-x cvs-examine
-Run a @samp{cvs -n update} command. This is identical to the previous
-command, except that it will only check what needs to be done but will
-not change anything. You will be asked for the directory in
-which the @samp{cvs -n update} will be run.
-
address@hidden M-x cvs-status
-Run a @samp{cvs status} command. You will be asked for the directory
-in which the @samp{cvs status} will be run.
-
address@hidden M-x cvs-checkout
-Run a @samp{cvs checkout} command. You will be asked for the directory
-in which the @samp{cvs update} will be run and the module to be checked
-out.
-
address@hidden M-x cvs-quickdir
-Populate the @samp{*cvs*} buffer by just looking at the @file{CVS/Entries}
-files. This is very much like @code{cvs-examine} except that it does
-not access the CVS repository, which is a major advantage when the
-repository is far away. But of course, it will not be able to detect
-when a file needs to be updated or merged.
address@hidden table
-
address@hidden cvs-dired-action
address@hidden cvs-dired-use-hook
-The first four of
-those commands are also reachable from the menu bar
-under @samp{Tools->PCL-CVS}. Finally, an alternative way is to visit
-the CVS administrative subdirectory in your work area with a simple
-prefix argument. For example @kbd{C-u C-x C-f ~/my/work/CVS @key{RET}}. This
-by default runs @code{cvs-quickdir} but the specific behavior can be
-changed with @code{cvs-dired-action} and @code{cvs-dired-use-hook}.
-
-By default, the commands above will descend recursively into
-subdirectories. You can avoid that behavior by including @samp{-l} in
-the flags for the command. These flags can be set by giving a prefix
-argument to the command (e.g., by typing
address@hidden M-x cvs-update @key{RET} -l @key{RET}}).
-
-
address@hidden Setting flags, Updating the buffer, Entering PCL-CVS, Commands
address@hidden Setting flags for CVS commands
address@hidden Optional switches to CVS
address@hidden Command-line options to CVS
-
-This section describes the convention used by nearly all PCL-CVS
-commands for setting optional flags sent to CVS. A single @kbd{C-u}
-prefix argument is used to cause the command to prompt for flags to be
-used for the current invocation of the command only. Two @kbd{C-u} prefix
-arguments are used to prompt for flags which will be set permanently, for the
-current invocation and all that follow, until the flags are changed, or
-unless temporary flags are set which override them.
-
-Perhaps an example or two is in order. Say you are about to add a
-binary file to the repository, and want to specify the flags @samp{-kb}
-to @samp{cvs add}. You can type @kbd{C-u a -kb @key{RET}},
-and the file will be added. Subsequent @samp{cvs add}
-commands will use the previously prevailing flags.
-
-As a second example, say you are about to perform a diff and want to see
-the result in unified diff format, i.e. you'd like to pass the flag
address@hidden to both @samp{cvs diff} and @samp{diff}. You'd also like all
-subsequent diffs to use this flag. You can type @kbd{C-u C-u = -u @key{RET}}
-and the diff will be performed, and the default flags will be set to
address@hidden("-u")}. You can of course override this flag for a single diff
-by using a single @kbd{C-u} prefix argument.
-
address@hidden Special prefix
-In addition to this, some commands can take @dfn{special prefix} arguments.
-These work as follows: When called with a @kbd{C-u} prefix, the user is
-prompted for a new value of the special prefix and the special prefix is
-activated for the next command. When called without the @kbd{C-u}
-prefix, the special prefix is re-activated (with the same value as last
-time) for the next command. Calling the prefix command again when it's
-already activated deactivates it. Calling it with the @kbd{C-u C-u}
-prefix activates it for all subsequent commands until you deactivate it
-explicitly. The special prefixes are:
-
address@hidden @kbd
address@hidden T
-Toggles whether or not marks will be active in the next address@hidden
-
address@hidden b
-Provide the next command with a branch (can be any version
-specifier) to work address@hidden
-
address@hidden B
-Secondary branch argument. Only meaningful if @kbd{b} is also used.
-It can be used to provide a second branch argument to
address@hidden or to @code{cvs-mode-update}.
-
address@hidden M-f
-Forces the next command to apply to every selected file rather than only
-to the ones PCL-CVS thinks are relevant.
address@hidden table
-
address@hidden Updating the buffer, Movement commands, Setting flags, Commands
address@hidden Updating the @samp{*cvs*} buffer
address@hidden cvs-update
address@hidden cvs-examine
address@hidden cvs-status
address@hidden cvs-mode-update
address@hidden cvs-mode-examine
address@hidden cvs-mode-status
-
-The following commands can be used from within the @samp{*cvs*} buffer
-to update the display:
-
address@hidden @kbd
address@hidden M-u
-Runs the command @address@hidden
-
address@hidden M-e
-Runs the command @address@hidden
-
address@hidden M-s
-Runs the command @address@hidden
address@hidden table
-
-In addition to the above commands which operate on the whole module,
-you can run the equivalent CVS command on just a subset of the
-files/directories with these keys:
-
address@hidden @kbd
address@hidden O
-Runs @code{cvs-mode-update} on the selected files. When run on the
-top-level directory, this is equivalent to @address@hidden
-
address@hidden e
-Runs @code{cvs-mode-examine} on the selected files. When run on the
-top-level directory, this is equivalent to @address@hidden
-
address@hidden cvs-status-mode
address@hidden s
-Runs @code{cvs-mode-status} on the selected files. When run on the
-top-level directory, this is equivalent to @kbd{M-s}, except that
-CVS output will be shown in a @samp{*cvs-info*} buffer that will be
-put in @address@hidden
address@hidden table
-
-
address@hidden Movement commands, Marking files, Updating the buffer, Commands
address@hidden Movement Commands
address@hidden Movement Commands
address@hidden cvs-mode-next-line
address@hidden cvs-mode-previous-line
address@hidden address@hidden down one file}
address@hidden address@hidden down one file}
address@hidden address@hidden up one file}
-
-You can use most normal Emacs commands to move forward and backward in
-the buffer. Some keys are rebound to functions that take advantage of
-the fact that the buffer is a PCL-CVS buffer:
-
-
address@hidden @kbd
address@hidden @key{SPC}
address@hidden n
-These keys move the cursor one file forward, towards the end of the
-buffer (@code{cvs-mode-next-line})address@hidden
-
address@hidden p
-This key moves one file backward, towards the beginning of the buffer
-(@code{cvs-mode-previous-line}).
address@hidden table
-
-
address@hidden Marking files, Committing changes, Movement commands, Commands
address@hidden Marking files
address@hidden Selecting files (commands to mark files)
address@hidden Marking files
address@hidden address@hidden a file}
address@hidden address@hidden all files}
address@hidden address@hidden a file}
address@hidden ESC address@hidden all files}
address@hidden address@hidden previous file}
address@hidden address@hidden files matching regexp}
address@hidden address@hidden files in a particular state}
address@hidden address@hidden marks}
address@hidden cvs-mode-mark
address@hidden cvs-mode-unmark
address@hidden cvs-mode-mark-all-files
address@hidden cvs-mode-unmark-all-files
address@hidden cvs-mode-unmark-up
address@hidden cvs-mode-mark-matching-files
address@hidden cvs-mode-mark-on-state
address@hidden cvs-mode-toggle-marks
-
-PCL-CVS works on a set of @dfn{selected files} (@pxref{Selected files}).
-You can mark and unmark files with these commands:
-
address@hidden @kbd
address@hidden m
-This marks the file that the cursor is positioned on. If the cursor is
-positioned on a directory all files in that directory are marked
-(@code{cvs-mode-mark})address@hidden
-
address@hidden u
-Unmark the file that the cursor is positioned on. If the cursor is on a
-directory, all files in that directory are unmarked
-(@code{cvs-mode-unmark})address@hidden
-
address@hidden M
-Mark @emph{all} files in the buffer (@code{cvs-mode-mark-all-files}).
-
address@hidden address@hidden
-Unmark @emph{all} files (@code{cvs-mode-unmark-all-files}).
-
address@hidden @key{DEL}
-Unmark the file on the previous line, and move point to that line
-(@code{cvs-mode-unmark-up}).
-
address@hidden %
-Mark all files matching a regular expression
-(@code{cvs-mode-mark-matching-files}).
-
address@hidden S
-Mark all files in a particular state, such as ``Modified'' or
-``Removed'' (@code{cvs-mode-mark-on-state}).
-
address@hidden T
-Toggle use of marks for the next command (@code{cvs-mode-toggle-marks}).
address@hidden table
-
-
address@hidden Committing changes, Editing files, Marking files, Commands
address@hidden Committing changes
address@hidden Committing changes
address@hidden cvs-mode-commit
address@hidden cvs-mode-commit-setup
address@hidden address@hidden files}
address@hidden address@hidden files with @file{ChangeLog} message}
address@hidden address@hidden (variable)}
address@hidden Commit buffer
address@hidden Edit buffer
address@hidden Erasing commit message
address@hidden Reverting buffers after commit
-
-Committing changes basically works as follows:
-
address@hidden
address@hidden
-After having selected the files you want to commit, you type either
address@hidden or @kbd{C} which brings up a special buffer
address@hidden@refill
-
address@hidden
-You type in the log message describing the changes you're about to
-commit (@pxref{Log Edit Mode}).
-
address@hidden
-When you're happy with it, you type @kbd{C-c C-c} to do the actual
address@hidden
address@hidden enumerate
-
-There's no hidden state, so you can abort the process or pick it up
-again at any time.
-
address@hidden address@hidden (variable)}
-The set of files actually committed is really decided only during the
-very last step, which is a mixed blessing. It allows you to go back and
-change your mind about which files to commit, but it also means that you
-might inadvertently change the set of selected files. To reduce the
-risk of error, @kbd{C-c C-c} will ask for confirmation if the set of
-selected files has changed between the first step and the last. You can
-change this last detail with @code{log-edit-confirm}.
-
-As for the difference between @kbd{c} (i.e. @code{cvs-mode-commit}) and
address@hidden (i.e. @code{cvs-mode-commit-setup}) is that the first gets you
-straight to @samp{*cvs-commit*} without erasing it or changing anything
-to its content, while the second first erases @samp{*cvs-commit*}
-and tries to initialize it with a sane default (it does that by either
-using a template provided by the CVS administrator or by extracting a
-relevant log message from a @file{ChangeLog} file).
-
-If you are editing the files in your Emacs, an automatic
address@hidden will be performed. (If the file contains
address@hidden@asis{Id}$} keywords, @samp{cvs commit} will write a new file with
-the new values substituted. The auto-revert makes sure that you get
-them into your buffer.) The revert will not occur if you have modified
-your buffer, or if @samp{cvs-auto-revert} is set to
address@hidden
-
-
address@hidden Editing files, Getting info about files, Committing changes,
Commands
address@hidden Editing files
address@hidden Editing files
address@hidden Finding files
address@hidden Loading files
address@hidden Dired
address@hidden Invoking dired
address@hidden cvs-mode-find-file
address@hidden cvs-mode-find-file-other-window
address@hidden cvs-mode-add-change-log-entry-other-window
address@hidden address@hidden file or directory}
address@hidden address@hidden file in other window}
address@hidden address@hidden @file{ChangeLog} entry}
-
-There are currently three commands that can be used to find a file (that
-is, load it into a buffer and start editing it there). These commands
-work on the line that the cursor is situated at. They always ignore any marked
-files.
-
address@hidden @kbd
address@hidden f
-Find the file that the cursor points to (@code{cvs-mode-find-file}). If
-the cursor points to a directory, run @code{dired} on that directory;
address@hidden, , emacs}.
-
address@hidden o
-Like @kbd{f}, but use another window
-(@code{cvs-mode-find-file-other-window})address@hidden
-
address@hidden A
-Invoke @samp{add-change-log-entry-other-window} to edit a
address@hidden file. The @file{ChangeLog} file will be found in the
-directory of the file the cursor points to, or in a parent of that
-directory (@code{cvs-mode-add-change-log-entry-other-window})address@hidden
address@hidden table
-
-
address@hidden Getting info about files, Adding and removing files, Editing
files, Commands
address@hidden Getting info about files
address@hidden Status (cvs command)
address@hidden Log (RCS/cvs command)
address@hidden Getting status
address@hidden address@hidden @samp{cvs log}}
address@hidden address@hidden @samp{cvs status}}
address@hidden cvs-mode-log
address@hidden cvs-mode-status
-
address@hidden @kbd
address@hidden l
-Call the command @code{cvs-mode-log} which runs @samp{cvs log} on all
-selected files, and show the result in a temporary buffer
address@hidden (@pxref{Log View Mode}).
-
address@hidden s
-Call the command @code{cvs-mode-status} which runs @samp{cvs status} on
-all selected files, and show the result in a temporary buffer
address@hidden
address@hidden Fixme: reinstate when node is written:
address@hidden (@pxref{CVS Status Mode}).
address@hidden table
-
-
address@hidden Adding and removing files, Undoing changes, Getting info about
files, Commands
address@hidden Adding and removing files
address@hidden Adding files
address@hidden Removing files
address@hidden Resurrecting files
address@hidden Deleting files
address@hidden Putting files under CVS control
address@hidden address@hidden a file}
address@hidden address@hidden a file}
address@hidden cvs-mode-add
address@hidden cvs-mode-remove-file
-
-The following commands are available to make it easy to add files to
-and remove them from the CVS repository.
-
address@hidden @kbd
address@hidden a
-Add all selected files. This command can be used on @samp{Unknown}
-files (@pxref{Buffer contents}). The status of the file will change to
address@hidden, and you will have to use @kbd{c} (@samp{cvs-mode-commit}
address@hidden changes}), to really add the file to the
address@hidden
-
-This command can also be used on @samp{Removed} files (before you commit
-them) to resurrect them.
-
-The command that is run is @code{cvs-mode-add}.
-
address@hidden r
-This command removes the selected files (after prompting for
-confirmation). The files are deleted from your directory and
-(unless the status was @samp{Unknown}; @pxref{Buffer contents}) they will
-also be @samp{cvs remove}d. If the files' status was @samp{Unknown}
-they will disappear from the buffer. Otherwise their status will change to
address@hidden, and you must use @kbd{c} (@samp{cvs-mode-commit},
address@hidden changes}) to commit the address@hidden
-
-The command that is run is @code{cvs-mode-remove-file}.
address@hidden table
-
-
address@hidden Undoing changes, Removing handled entries, Adding and removing
files, Commands
address@hidden Undoing changes
address@hidden Undo changes
address@hidden Flush changes
address@hidden address@hidden changes}
address@hidden cvs-mode-undo-local-changes
-
address@hidden @kbd
address@hidden U
-If you have modified a file, and for some reason decide that you don't
-want to keep the changes, you can undo them with this command. It works
-by removing your working copy of the file and then getting the latest
-version from the repository (@code{cvs-mode-undo-local-changes}).
address@hidden table
-
-
address@hidden Removing handled entries, Ignoring files, Undoing changes,
Commands
address@hidden Removing handled entries
address@hidden Expunging uninteresting entries
address@hidden Uninteresting entries, getting rid of them
address@hidden Getting rid of uninteresting lines
address@hidden Removing uninteresting (processed) lines
address@hidden Handled lines, removing them
address@hidden address@hidden processed entries}
address@hidden address@hidden selected entries}
address@hidden cvs-mode-remove-handled
address@hidden cvs-mode-acknowledge
address@hidden cvs-mode-ignore
-
address@hidden @kbd
address@hidden x
-This command allows you to remove all entries that you have processed.
-More specifically, the lines for @samp{Up-to-date} files (@pxref{Buffer
-contents}) are removed from the buffer. If a directory becomes empty
-the heading for that directory is also removed. This makes it easier to
-get an overview of what needs to be done.
-
address@hidden address@hidden (variable)}
address@hidden invokes @code{cvs-mode-remove-handled}. If
address@hidden is set to address@hidden, this will
-automatically be performed after every address@hidden
-
address@hidden C-k
-This command can be used for lines that @samp{cvs-mode-remove-handled} would
-not delete, but that you want to delete (@code{cvs-mode-acknowledge}).
address@hidden table
-
-
address@hidden Ignoring files, Viewing differences, Removing handled entries,
Commands
address@hidden Ignoring files
address@hidden Ignoring files
address@hidden address@hidden files}
address@hidden cvs-mode-ignore
-
address@hidden @kbd
address@hidden i
-Arrange so that CVS will ignore the selected files. The file names are
-added to the @file{.cvsignore} file in the corresponding directory. If
-the @file{.cvsignore} file doesn't exist, it will be created.
-
-The @file{.cvsignore} file should normally be added to the repository,
-but you could ignore it as well, if you like it better that way.
-
-This runs @code{cvs-mode-ignore}.
address@hidden table
-
address@hidden Viewing differences, Invoking Ediff, Ignoring files, Commands
address@hidden Viewing differences
address@hidden Diff
address@hidden Invoking @code{diff}
address@hidden Conflicts, how to resolve them
address@hidden Viewing differences
address@hidden address@hidden @samp{cvs diff}}
address@hidden address@hidden @samp{cvs diff}}
address@hidden address@hidden against base version}
address@hidden address@hidden against head of repository}
address@hidden address@hidden between base and head of repository}
address@hidden address@hidden against vendor branch}
address@hidden address@hidden against yesterday's head}
address@hidden cvs-mode-diff
address@hidden cvs-mode-diff-backup
address@hidden cvs-mode-diff-head
address@hidden cvs-mode-diff-repository
address@hidden cvs-mode-diff-vendor
address@hidden cvs-mode-diff-yesterday
address@hidden address@hidden (variable)}
-
address@hidden @kbd
address@hidden =
address@hidden d =
-Display a @samp{cvs diff} between the selected files and the version
-that they are based on (@code{cvs-mode-diff})address@hidden
-
address@hidden d b
-If CVS finds a conflict while merging two versions of a file (during a
address@hidden update}, @pxref{Updating the buffer}) it will save the
-original file in a file called @address@hidden@var{version}} where
address@hidden is the name of the file, and @var{version} is the revision
-number that @var{file} was based address@hidden
-
-With the @kbd{d b} command you can run a @samp{diff} on the files
address@hidden@address@hidden and @address@hidden@refill
-
address@hidden d h
-Display a @samp{cvs diff} between the selected files and the head
-revision (the most recent version on the current
-branch) in the repository (@code{cvs-mode-diff-head})address@hidden
-
address@hidden d r
-Display a @samp{cvs diff} between the base revision of the selected
-files and the head revision in the repository. This displays the
-changes anyone has committed to the repository since you last executed
-a checkout, update or commit operation
-(@code{cvs-mode-diff-repository}).
-
address@hidden d v
-Display a @samp{cvs diff} between the selected files and the head
-revision of the vendor branch in the repository
-(@code{cvs-mode-diff-vendor})address@hidden
-
address@hidden d y
-Display a @samp{cvs diff} between the selected files and yesterday's
-head revision in the repository
-(@code{cvs-mode-diff-yesterday})address@hidden
address@hidden table
-
-By default, @samp{diff} commands ignore the marks. This can be changed
-with @code{cvs-invert-ignore-marks}.
-
address@hidden Invoking Ediff, Updating files, Viewing differences, Commands
address@hidden Running ediff
address@hidden Ediff
address@hidden Invoking ediff
address@hidden Viewing differences
address@hidden Conflicts, how to resolve them
address@hidden Resolving conflicts
address@hidden address@hidden @samp{ediff}}
address@hidden cvs-mode-idiff
address@hidden cvs-mode-imerge
-
address@hidden @kbd
address@hidden address@hidden (variable)}
address@hidden d e
-This uses @code{ediff} (or @code{emerge}, depending on
address@hidden) to allow you to view diffs.
-If a prefix argument is given, PCL-CVS will prompt for a revision against
-which the diff should be made, else the default will be to use the BASE
-revision.
-
address@hidden Merging with @code{ediff} and @code{emerge}
address@hidden d E
-This command use @code{ediff} (or @code{emerge}, see above) to allow you
-to do an interactive 3-way merge.
-
address@hidden note:} when the file status is @samp{Conflict},
-CVS has already performed a merge. The resulting file is not used in
-any way if you use this command. If you use the @kbd{q} command inside
address@hidden (to successfully terminate a merge) the file that CVS
-created will be address@hidden
address@hidden table
-
address@hidden Updating files, Tagging files, Invoking Ediff, Commands
address@hidden Updating files
address@hidden cvs-mode-update
address@hidden Updating files
address@hidden address@hidden files}
-
address@hidden @kbd
address@hidden O
-Update all selected files with status @samp{Need-update} by running
address@hidden update} on them (@code{cvs-mode-update}).
address@hidden table
-
-
address@hidden Tagging files, Miscellaneous commands, Updating files, Commands
address@hidden Tagging files
address@hidden cvs-mode-tag
address@hidden cvs-mode-untag
address@hidden cvs-rtag
address@hidden Tagging files
address@hidden address@hidden tag files}
address@hidden address@hidden files}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
-
address@hidden @kbd
address@hidden t
-Tag all selected files by running @samp{cvs tag} on
-them (@code{cvs-mode-tag}). It's usually preferable to tag a directory
-at a time. Rather than selecting all files (which too often doesn't
-select all files but only the few that are displayed), clear the
-selection with @kbd{M-DEL} (@code{cvs-mode-unmark-all-files}), position
-the cursor on the directory you want to tag and hit @kbd{t}.
address@hidden table
-
-By default, @samp{tag} commands ignore the marks. This can be changed
-with @code{cvs-invert-ignore-marks}. Also, by default @samp{tag} can
-only be applied to directories, see @code{cvs-force-dir-tag} if you want
-to change this behavior.
-
-
address@hidden Miscellaneous commands, , Tagging files, Commands
address@hidden Miscellaneous commands
address@hidden cvs-mode-byte-compile-files
address@hidden Recompiling elisp files
address@hidden Byte compilation
address@hidden cvs-mode-delete-lock
address@hidden Getting rid of lock files
address@hidden Lock files
address@hidden address@hidden the PCL-CVS buffer}
address@hidden cvs-bury-buffer
address@hidden cvs-mode-quit
address@hidden Quitting
address@hidden address@hidden
address@hidden address@hidden
address@hidden cvs-help
address@hidden Help
-
address@hidden @kbd
address@hidden M-x cvs-mode-byte-compile-files
-Byte compile all selected files that end in @file{.el}.
-
address@hidden M-x cvs-mode-delete-lock
-This command deletes the lock files that
-the @samp{*cvs*} buffer informs you about. You should normally never have to
-use this command, since CVS tries very carefully to always remove the
-lock files itself.
-
-You can only use this command when a message in the @samp{*cvs*} buffer tells
-you so. You should wait a while before using this command in case
-someone else is running a @code{cvs} command.
-
-Also note that this only works if the repository is local.
-
address@hidden ?
address@hidden h
-Show a summary of common command key bindings in the echo
-area (@code{cvs-help}).
-
address@hidden q
-Bury the PCL-CVS buffer (@code{cvs-bury-buffer}).
-
address@hidden M-x cvs-mode-quit
-Quit PCL-CVS, killing the @samp{*cvs*} buffer.
address@hidden table
-
address@hidden Log Edit Mode, Log View Mode, Commands, Top
address@hidden Editing a Log Message
-
address@hidden Log Edit mode
address@hidden mode, Log Edit
-Buffers for entering/editing log messages for changes which are about
-to be committed are put into Log Edit mode.
-
-Sometimes the log buffer contains default text when you enter it,
-typically the last log message entered. If it does, mark and point
-are set around the entire contents of the buffer so that it is easy to
-kill the contents of the buffer with @kbd{C-w}.
-
address@hidden log-edit-insert-changelog
-If you work by writing entries in the @file{ChangeLog}
-(@pxref{(emacs)Change Log}) and then commit the change under revision
-control, you can generate the Log Edit text from the ChangeLog using
address@hidden C-a} (@kbd{log-edit-insert-changelog}). This looks for
-entries for the file(s) concerned in the top entry in the ChangeLog
-and uses those paragraphs as the log text. This text is only inserted
-if the top entry was made under your user name on the current date.
address@hidden(emacs)Change Logs and VC}, for the opposite way of
-working---generating ChangeLog entries from the revision control log.
-
-In the Log Edit buffer, @kbd{C-c C-f} (@kbd{M-x log-edit-show-files})
-shows the list of files to be committed in case you need to check
-that.
-
-When you have finished editing the log message, type @kbd{C-c C-c} to
-exit the buffer and commit the change.
-
address@hidden Fixme: customization variables
-
address@hidden Log View Mode, Customization, Log Edit Mode, Top
address@hidden Browsing a Log of Changes
-
address@hidden Log View mode
address@hidden mode, Log View
address@hidden output, logs
-
address@hidden cvs-mode-log
address@hidden vc-print-log
-Log View mode provides a few useful commands for navigating revision
-control log output. It is used for the output buffers of both
address@hidden and @code{vc-print-log}.
-
-In this mode, @kbd{n} goes to the next message and @kbd{p} goes to the
-previous message and @kbd{N} and @kbd{P} go to the next and previous
-files, respectively, in multi-file output. With a numeric prefix
-argument, these commands move that many messages of files.
-
address@hidden @node CVS Status Mode
address@hidden @chapter Viewing CVS' Status output
-
address@hidden Customization, Bugs, Log View Mode, Top
address@hidden Customization
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden address@hidden (variable)}
address@hidden Customization
address@hidden Variables, list of all
address@hidden Erasing input buffer
address@hidden Context diff, how to get
address@hidden Unidiff, how to get
address@hidden Automatically remove handled files
address@hidden @samp{-u} option in modules file
address@hidden Modules file (@samp{-u} option)
address@hidden Update program (@samp{-u} option in modules file)
address@hidden Reverting buffers after commit
address@hidden Require final newline
address@hidden Automatically inserting newline
address@hidden Commit message, inserting newline
address@hidden Sorting @file{.cvsignore} file
address@hidden @file{.cvsignore} file, sorting
address@hidden Automatically sorting @file{.cvsignore}
address@hidden @samp{CVSROOT}, overriding
-
-If you have an idea about any customization that would be handy but
-isn't present in this list, please tell us!
-For info on how to reach us, see @address@hidden
-
address@hidden @samp
address@hidden cvs-auto-remove-handled
-If this variable is set to any address@hidden value,
address@hidden will be called every time you check in
-files, after the check-in is ready. @xref{Removing handled
address@hidden
-
address@hidden cvs-auto-remove-directories
-If this variable is set to any address@hidden value, directories that do
-not contain any files to be checked in will not be listed in the
address@hidden address@hidden
-
address@hidden cvs-auto-revert
-If this variable is set to any address@hidden value any buffers you have
-that visit a file that is committed will be automatically reverted.
-This variable defaults to @samp{t}. @xref{Committing address@hidden
-
address@hidden cvs-update-prog-output-skip-regexp
-The @samp{-u} flag in the @file{modules} file can be used to run a command
-whenever a @samp{cvs update} is performed (see @code{cvs(5)}). This regexp
-is used to search for the last line in that output. It is normally set
-to @samp{$}. That setting is only correct if the command outputs
-nothing. Note that PCL-CVS will get very confused if the command
-outputs @emph{anything} to @code{stderr}.
-
address@hidden cvs-cvsroot
-This variable can be set to override @samp{CVSROOT}. It should be a
-string. If it is set, then every time a @code{cvs} command is run, it
-will be called as @samp{cvs -d @address@hidden This can be
-useful if your site has several repositories.
-
address@hidden log-edit-require-final-newline
address@hidden wordy to avoid unhderfull hbox
-When you enter a log message by typing into the
address@hidden buffer, PCL-CVS normally automatically
-inserts a trailing newline, unless there already is one. This behavior
-can be controlled via @samp{cvs-commit-buffer-require-final-newline}.
-If it is @samp{t} (the default behavior), a newline will always be
-appended. If it is @samp{nil}, newlines will never be appended. Any
-other value causes PCL-CVS to ask the user whenever there is no trailing
-newline in the commit message buffer.
-
address@hidden cvs-mode-changelog-commit
address@hidden log-edit-changelog-full-paragraphs
-If this variable is address@hidden, include full @file{ChangeLog}
-paragraphs in the CVS log created by @samp{cvs-mode-changelog-commit}.
-This may be set in the local variables section of a @file{ChangeLog}
-file, to indicate the policy for that @file{ChangeLog}.
-
address@hidden @file{ChangeLog} paragraphs
-A @address@hidden paragraph} is a bunch of log text containing no
-blank lines; a paragraph usually describes a set of changes with a
-single purpose, but perhaps spanning several functions in several files.
-Changes in different paragraphs are unrelated.
-
-You could argue that the CVS log entry for a file should contain the
-full @file{ChangeLog} paragraph mentioning the change to the file, even though
-it may mention other files, because that gives you the full context you
-need to understand the change. This is the behavior you get when this
-variable is set to @code{t}, the default.
-
-On the other hand, you could argue that the CVS log entry for a change
-should contain only the text for the changes which occurred in that
-file, because the CVS log is per-file. This is the behavior you get
-when this variable is set to @code{nil}.
-
address@hidden address@hidden, and @file{.cvsignore} sorting}
address@hidden cvs-sort-ignore-file
-If this variable is set to any address@hidden value, the
address@hidden file will always be sorted whenever you use
address@hidden to add a file to it. This option is on by
-default.
address@hidden table
-
-
address@hidden
-* Customizing Faces::
address@hidden menu
-
address@hidden Customizing Faces, , Customization, Customization
address@hidden Customizing Faces
address@hidden cvs-header (face)
address@hidden cvs-filename (face)
address@hidden cvs-unknown (face)
address@hidden cvs-handled (face)
address@hidden cvs-need-action (face)
address@hidden cvs-marked (face)
address@hidden cvs-msg (face)
-
-PCL-CVS adds a few extra features, including menus, mouse bindings, and
-fontification of the @samp{*cvs*} buffer. The faces defined for
-fontification are listed below:
-
address@hidden @samp
address@hidden cvs-header
-used to highlight directory changes.
-
address@hidden cvs-filename
-Used to highlight file names.
-
address@hidden cvs-unknown
-Used to highlight the status of files which are @samp{Unknown}.
-
address@hidden cvs-handled
-Used to highlight the status of files which are handled and
-need no further action.
-
address@hidden cvs-need-action
-Used to highlight the status of files which still need action.
-
address@hidden cvs-marked
-Used to highlight the marked file indicator (@samp{*}).
-
address@hidden cvs-msg
-Used to highlight CVS messages.
address@hidden table
-
-
address@hidden Bugs, GNU Free Documentation License, Customization, Top
address@hidden Bugs (known and unknown)
address@hidden Reporting bugs and ideas
address@hidden Bugs, how to report them
address@hidden Author, how to reach
address@hidden Email to the author
address@hidden Known bugs
address@hidden Bugs, known
address@hidden FAQ
address@hidden Problems, list of common
-
-If you find a bug or misfeature, don't hesitate to tell us! Send email
-to @email{bug-gnu-emacs@@gnu.org} which is gatewayed to the newsgroup
address@hidden Feature requests should also be sent there. We
-prefer discussing one thing at a time. If you find several unrelated
-bugs, please report them separately. If you are running PCL-CVS under
-XEmacs, you should also send a copy of bug reports to
address@hidden@@xemacs.org}.
-
-If you have problems using PCL-CVS or other questions, send them to
address@hidden@@gnu.org}, which is gatewayed to the
address@hidden newsgroup. This is a good place to get help, as
-is @email{cvs-info@@gnu.org}, gatewayed to @samp{gnu.cvs.help}.
-
-If you have ideas for improvements, or if you have written some
-extensions to this package, we would like to hear from you. We hope that
-you find this package useful!
-
-Below is a partial list of currently known problems with PCL-CVS.
-
address@hidden @asis
address@hidden Unexpected output from CVS
-Unexpected output from CVS may confuse PCL-CVS. It will create
-warning messages in the @samp{*cvs*} buffer alerting you to any parse errors.
-If you get these messages, please send a bug report to the email
-addresses listed above. Include the contents of the @samp{*cvs*} buffer, the
-output of the CVS process (which should be found in the @samp{ *cvs-tmp*}
-buffer), and the versions of Emacs, PCL-CVS and CVS you are using.
address@hidden table
-
address@hidden GNU Free Documentation License, Function and Variable Index,
Bugs, Top
address@hidden GNU Free Documentation License
address@hidden doclicense.texi
-
-
-
address@hidden Function and Variable Index, Concept Index, GNU Free
Documentation License, Top
address@hidden Function and Variable Index
-
-This is an index of all the functions and variables documented in this
-manual.
-
address@hidden fn
-
address@hidden Concept Index, Key Index, Function and Variable Index, Top
address@hidden Concept Index
-
-This is an index of concepts discussed in this manual.
-
address@hidden cp
-
address@hidden Key Index, , Concept Index, Top
address@hidden Key Index
-
-This index includes an entry for each PCL-CVS key sequence documented in
-this manual.
-
address@hidden ky
-
address@hidden odd
address@hidden
address@hidden
address@hidden
-
address@hidden
- arch-tag: 5c7178ce-56fa-40b0-abd7-f4a09758b235
address@hidden ignore
- [Emacs-diffs] Changes to pcl-cvs.texi,
Glenn Morris <=