[Emacs-diffs] emacs/lisp dired.el

[Glenn Morris]

CVSROOT:        /sources/emacs
Module name:    emacs
Changes by:     Glenn Morris <gm>       09/09/11 06:50:49

Modified files:
        lisp           : dired.el 

Log message:
        Regenerate with extracted autoloads.

CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/emacs/lisp/dired.el?cvsroot=emacs&r1=1.426&r2=1.427

Patches:
Index: dired.el
===================================================================
RCS file: /sources/emacs/emacs/lisp/dired.el,v
retrieving revision 1.426
retrieving revision 1.427
diff -u -b -r1.426 -r1.427
--- dired.el    11 Sep 2009 00:59:04 -0000      1.426
+++ dired.el    11 Sep 2009 06:50:49 -0000      1.427
@@ -3445,6 +3445,504 @@
             '(dired-mode . dired-restore-desktop-buffer))
 
 
+;;; Start of automatically extracted autoloads.
+
+;;;### (autoloads (dired-show-file-type dired-do-query-replace-regexp
+;;;;;;  dired-do-search dired-do-isearch-regexp dired-do-isearch
+;;;;;;  dired-isearch-filenames-regexp dired-isearch-filenames 
dired-isearch-filenames-setup
+;;;;;;  dired-hide-all dired-hide-subdir dired-tree-down dired-tree-up
+;;;;;;  dired-kill-subdir dired-mark-subdir-files dired-goto-subdir
+;;;;;;  dired-prev-subdir dired-insert-subdir dired-maybe-insert-subdir
+;;;;;;  dired-downcase dired-upcase dired-do-symlink-regexp 
dired-do-hardlink-regexp
+;;;;;;  dired-do-copy-regexp dired-do-rename-regexp dired-do-rename
+;;;;;;  dired-do-hardlink dired-do-symlink dired-do-copy dired-create-directory
+;;;;;;  dired-rename-file dired-copy-file dired-relist-file dired-remove-file
+;;;;;;  dired-add-file dired-do-redisplay dired-do-load dired-do-byte-compile
+;;;;;;  dired-do-compress dired-query dired-compress-file dired-do-kill-lines
+;;;;;;  dired-run-shell-command dired-do-shell-command 
dired-do-async-shell-command
+;;;;;;  dired-clean-directory dired-do-print dired-do-touch dired-do-chown
+;;;;;;  dired-do-chgrp dired-do-chmod dired-compare-directories 
dired-backup-diff
+;;;;;;  dired-diff) "dired-aux" "dired-aux.el" 
"1b436ca08eedfcb4166a13c09df6bb23")
+;;; Generated autoloads from dired-aux.el
+
+(autoload 'dired-diff "dired-aux" "\
+Compare file at point with file FILE using `diff'.
+FILE defaults to the file at the mark.  (That's the mark set by
+\\[set-mark-command], not by Dired's \\[dired-mark] command.)
+The prompted-for file is the first file given to `diff'.
+With prefix arg, prompt for second argument SWITCHES,
+which is options for `diff'.
+
+\(fn FILE &optional SWITCHES)" t nil)
+
+(autoload 'dired-backup-diff "dired-aux" "\
+Diff this file with its backup file or vice versa.
+Uses the latest backup, if there are several numerical backups.
+If this file is a backup, diff it with its original.
+The backup file is the first file given to `diff'.
+With prefix arg, prompt for argument SWITCHES which is options for `diff'.
+
+\(fn &optional SWITCHES)" t nil)
+
+(autoload 'dired-compare-directories "dired-aux" "\
+Mark files with different file attributes in two dired buffers.
+Compare file attributes of files in the current directory
+with file attributes in directory DIR2 using PREDICATE on pairs of files
+with the same name.  Mark files for which PREDICATE returns non-nil.
+Mark files with different names if PREDICATE is nil (or interactively
+with empty input at the predicate prompt).
+
+PREDICATE is a Lisp expression that can refer to the following variables:
+
+    size1, size2   - file size in bytes
+    mtime1, mtime2 - last modification time in seconds, as a float
+    fa1, fa2       - list of file attributes
+                     returned by function `file-attributes'
+
+    where 1 refers to attribute of file in the current dired buffer
+    and 2 to attribute of file in second dired buffer.
+
+Examples of PREDICATE:
+
+    (> mtime1 mtime2) - mark newer files
+    (not (= size1 size2)) - mark files with different sizes
+    (not (string= (nth 8 fa1) (nth 8 fa2))) - mark files with different modes
+    (not (and (= (nth 2 fa1) (nth 2 fa2))   - mark files with different UID
+              (= (nth 3 fa1) (nth 3 fa2))))   and GID.
+
+\(fn DIR2 PREDICATE)" t nil)
+
+(autoload 'dired-do-chmod "dired-aux" "\
+Change the mode of the marked (or next ARG) files.
+Symbolic modes like `g+w' are allowed.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-chgrp "dired-aux" "\
+Change the group of the marked (or next ARG) files.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-chown "dired-aux" "\
+Change the owner of the marked (or next ARG) files.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-touch "dired-aux" "\
+Change the timestamp of the marked (or next ARG) files.
+This calls touch.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-print "dired-aux" "\
+Print the marked (or next ARG) files.
+Uses the shell command coming from variables `lpr-command' and
+`lpr-switches' as default.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-clean-directory "dired-aux" "\
+Flag numerical backups for deletion.
+Spares `dired-kept-versions' latest versions, and `kept-old-versions' oldest.
+Positive prefix arg KEEP overrides `dired-kept-versions';
+Negative prefix arg KEEP overrides `kept-old-versions' with KEEP made positive.
+
+To clear the flags on these files, you can use \\[dired-flag-backup-files]
+with a prefix argument.
+
+\(fn KEEP)" t nil)
+
+(autoload 'dired-do-async-shell-command "dired-aux" "\
+Run a shell command COMMAND on the marked files asynchronously.
+
+Like `dired-do-shell-command' but if COMMAND doesn't end in ampersand,
+adds `* &' surrounded by whitespace and executes the command asynchronously.
+The output appears in the buffer `*Async Shell Command*'.
+
+\(fn COMMAND &optional ARG FILE-LIST)" t nil)
+
+(autoload 'dired-do-shell-command "dired-aux" "\
+Run a shell command COMMAND on the marked files.
+If no files are marked or a specific numeric prefix arg is given,
+the next ARG files are used.  Just \\[universal-argument] means the current 
file.
+The prompt mentions the file(s) or the marker, as appropriate.
+
+If there is a `*' in COMMAND, surrounded by whitespace, this runs
+COMMAND just once with the entire file list substituted there.
+
+If there is no `*', but there is a `?' in COMMAND, surrounded by
+whitespace, this runs COMMAND on each file individually with the
+file name substituted for `?'.
+
+Otherwise, this runs COMMAND on each file individually with the
+file name added at the end of COMMAND (separated by a space).
+
+`*' and `?' when not surrounded by whitespace have no special
+significance for `dired-do-shell-command', and are passed through
+normally to the shell, but you must confirm first.  To pass `*' by
+itself to the shell as a wildcard, type `*\"\"'.
+
+If COMMAND produces output, it goes to a separate buffer.
+
+This feature does not try to redisplay Dired buffers afterward, as
+there's no telling what files COMMAND may have changed.
+Type \\[dired-do-redisplay] to redisplay the marked files.
+
+When COMMAND runs, its working directory is the top-level directory of
+the Dired buffer, so output files usually are created there instead of
+in a subdir.
+
+In a noninteractive call (from Lisp code), you must specify
+the list of file names explicitly with the FILE-LIST argument, which
+can be produced by `dired-get-marked-files', for example.
+
+\(fn COMMAND &optional ARG FILE-LIST)" t nil)
+
+(autoload 'dired-run-shell-command "dired-aux" "\
+Not documented
+
+\(fn COMMAND)" nil nil)
+
+(autoload 'dired-do-kill-lines "dired-aux" "\
+Kill all marked lines (not the files).
+With a prefix argument, kill that many lines starting with the current line.
+\(A negative argument kills backward.)
+If you use this command with a prefix argument to kill the line
+for a file that is a directory, which you have inserted in the
+Dired buffer as a subdirectory, then it deletes that subdirectory
+from the buffer as well.
+To kill an entire subdirectory (without killing its line in the
+parent directory), go to its directory header line and use this
+command with a prefix argument (the value does not matter).
+
+\(fn &optional ARG FMT)" t nil)
+
+(autoload 'dired-compress-file "dired-aux" "\
+Not documented
+
+\(fn FILE)" nil nil)
+
+(autoload 'dired-query "dired-aux" "\
+Not documented
+
+\(fn QS-VAR QS-PROMPT &rest QS-ARGS)" nil nil)
+
+(autoload 'dired-do-compress "dired-aux" "\
+Compress or uncompress marked (or next ARG) files.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-byte-compile "dired-aux" "\
+Byte compile marked (or next ARG) Emacs Lisp files.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-load "dired-aux" "\
+Load the marked (or next ARG) Emacs Lisp files.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-redisplay "dired-aux" "\
+Redisplay all marked (or next ARG) files.
+If on a subdir line, redisplay that subdirectory.  In that case,
+a prefix arg lets you edit the `ls' switches used for the new listing.
+
+Dired remembers switches specified with a prefix arg, so that reverting
+the buffer will not reset them.  However, using `dired-undo' to re-insert
+or delete subdirectories can bypass this machinery.  Hence, you sometimes
+may have to reset some subdirectory switches after a `dired-undo'.
+You can reset all subdirectory switches to the default using
+\\<dired-mode-map>\\[dired-reset-subdir-switches].
+See Info node `(emacs)Subdir switches' for more details.
+
+\(fn &optional ARG TEST-FOR-SUBDIR)" t nil)
+
+(autoload 'dired-add-file "dired-aux" "\
+Not documented
+
+\(fn FILENAME &optional MARKER-CHAR)" nil nil)
+
+(autoload 'dired-remove-file "dired-aux" "\
+Not documented
+
+\(fn FILE)" nil nil)
+
+(autoload 'dired-relist-file "dired-aux" "\
+Create or update the line for FILE in all Dired buffers it would belong in.
+
+\(fn FILE)" nil nil)
+
+(autoload 'dired-copy-file "dired-aux" "\
+Not documented
+
+\(fn FROM TO OK-FLAG)" nil nil)
+
+(autoload 'dired-rename-file "dired-aux" "\
+Not documented
+
+\(fn FILE NEWNAME OK-IF-ALREADY-EXISTS)" nil nil)
+
+(autoload 'dired-create-directory "dired-aux" "\
+Create a directory called DIRECTORY.
+
+\(fn DIRECTORY)" t nil)
+
+(autoload 'dired-do-copy "dired-aux" "\
+Copy all marked (or next ARG) files, or copy the current file.
+This normally preserves the last-modified date when copying.
+When operating on just the current file, you specify the new name.
+When operating on multiple or marked files, you specify a directory,
+and new copies of these files are made in that directory
+with the same names that the files currently have.  The default
+suggested for the target directory depends on the value of
+`dired-dwim-target', which see.
+
+This command copies symbolic links by creating new ones,
+like `cp -d'.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-symlink "dired-aux" "\
+Make symbolic links to current file or all marked (or next ARG) files.
+When operating on just the current file, you specify the new name.
+When operating on multiple or marked files, you specify a directory
+and new symbolic links are made in that directory
+with the same names that the files currently have.  The default
+suggested for the target directory depends on the value of
+`dired-dwim-target', which see.
+
+For relative symlinks, use \\[dired-do-relsymlink].
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-hardlink "dired-aux" "\
+Add names (hard links) current file or all marked (or next ARG) files.
+When operating on just the current file, you specify the new name.
+When operating on multiple or marked files, you specify a directory
+and new hard links are made in that directory
+with the same names that the files currently have.  The default
+suggested for the target directory depends on the value of
+`dired-dwim-target', which see.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-rename "dired-aux" "\
+Rename current file or all marked (or next ARG) files.
+When renaming just the current file, you specify the new name.
+When renaming multiple or marked files, you specify a directory.
+This command also renames any buffers that are visiting the files.
+The default suggested for the target directory depends on the value
+of `dired-dwim-target', which see.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-do-rename-regexp "dired-aux" "\
+Rename selected files whose names match REGEXP to NEWNAME.
+
+With non-zero prefix argument ARG, the command operates on the next ARG
+files.  Otherwise, it operates on all the marked files, or the current
+file if none are marked.
+
+As each match is found, the user must type a character saying
+  what to do with it.  For directions, type \\[help-command] at that time.
+NEWNAME may contain \\=\\<n> or \\& as in `query-replace-regexp'.
+REGEXP defaults to the last regexp used.
+
+With a zero prefix arg, renaming by regexp affects the absolute file name.
+Normally, only the non-directory part of the file name is used and changed.
+
+\(fn REGEXP NEWNAME &optional ARG WHOLE-NAME)" t nil)
+
+(autoload 'dired-do-copy-regexp "dired-aux" "\
+Copy selected files whose names match REGEXP to NEWNAME.
+See function `dired-do-rename-regexp' for more info.
+
+\(fn REGEXP NEWNAME &optional ARG WHOLE-NAME)" t nil)
+
+(autoload 'dired-do-hardlink-regexp "dired-aux" "\
+Hardlink selected files whose names match REGEXP to NEWNAME.
+See function `dired-do-rename-regexp' for more info.
+
+\(fn REGEXP NEWNAME &optional ARG WHOLE-NAME)" t nil)
+
+(autoload 'dired-do-symlink-regexp "dired-aux" "\
+Symlink selected files whose names match REGEXP to NEWNAME.
+See function `dired-do-rename-regexp' for more info.
+
+\(fn REGEXP NEWNAME &optional ARG WHOLE-NAME)" t nil)
+
+(autoload 'dired-upcase "dired-aux" "\
+Rename all marked (or next ARG) files to upper case.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-downcase "dired-aux" "\
+Rename all marked (or next ARG) files to lower case.
+
+\(fn &optional ARG)" t nil)
+
+(autoload 'dired-maybe-insert-subdir "dired-aux" "\
+Insert this subdirectory into the same dired buffer.
+If it is already present, just move to it (type \\[dired-do-redisplay] to 
refresh),
+  else inserts it at its natural place (as `ls -lR' would have done).
+With a prefix arg, you may edit the ls switches used for this listing.
+  You can add `R' to the switches to expand the whole tree starting at
+  this subdirectory.
+This function takes some pains to conform to `ls -lR' output.
+
+Dired remembers switches specified with a prefix arg, so that reverting
+the buffer will not reset them.  However, using `dired-undo' to re-insert
+or delete subdirectories can bypass this machinery.  Hence, you sometimes
+may have to reset some subdirectory switches after a `dired-undo'.
+You can reset all subdirectory switches to the default using
+\\<dired-mode-map>\\[dired-reset-subdir-switches].
+See Info node `(emacs)Subdir switches' for more details.
+
+\(fn DIRNAME &optional SWITCHES NO-ERROR-IF-NOT-DIR-P)" t nil)
+
+(autoload 'dired-insert-subdir "dired-aux" "\
+Insert this subdirectory into the same dired buffer.
+If it is already present, overwrites previous entry,
+  else inserts it at its natural place (as `ls -lR' would have done).
+With a prefix arg, you may edit the `ls' switches used for this listing.
+  You can add `R' to the switches to expand the whole tree starting at
+  this subdirectory.
+This function takes some pains to conform to `ls -lR' output.
+
+\(fn DIRNAME &optional SWITCHES NO-ERROR-IF-NOT-DIR-P)" t nil)
+
+(autoload 'dired-prev-subdir "dired-aux" "\
+Go to previous subdirectory, regardless of level.
+When called interactively and not on a subdir line, go to this subdir's line.
+
+\(fn ARG &optional NO-ERROR-IF-NOT-FOUND NO-SKIP)" t nil)
+
+(autoload 'dired-goto-subdir "dired-aux" "\
+Go to end of header line of DIR in this dired buffer.
+Return value of point on success, otherwise return nil.
+The next char is either \\n, or \\r if DIR is hidden.
+
+\(fn DIR)" t nil)
+
+(autoload 'dired-mark-subdir-files "dired-aux" "\
+Mark all files except `.' and `..' in current subdirectory.
+If the Dired buffer shows multiple directories, this command
+marks the files listed in the subdirectory that point is in.
+
+\(fn)" t nil)
+
+(autoload 'dired-kill-subdir "dired-aux" "\
+Remove all lines of current subdirectory.
+Lower levels are unaffected.
+
+\(fn &optional REMEMBER-MARKS)" t nil)
+
+(autoload 'dired-tree-up "dired-aux" "\
+Go up ARG levels in the dired tree.
+
+\(fn ARG)" t nil)
+
+(autoload 'dired-tree-down "dired-aux" "\
+Go down in the dired tree.
+
+\(fn)" t nil)
+
+(autoload 'dired-hide-subdir "dired-aux" "\
+Hide or unhide the current subdirectory and move to next directory.
+Optional prefix arg is a repeat factor.
+Use \\[dired-hide-all] to (un)hide all directories.
+
+\(fn ARG)" t nil)
+
+(autoload 'dired-hide-all "dired-aux" "\
+Hide all subdirectories, leaving only their header lines.
+If there is already something hidden, make everything visible again.
+Use \\[dired-hide-subdir] to (un)hide a particular subdirectory.
+
+\(fn ARG)" t nil)
+
+(autoload 'dired-isearch-filenames-setup "dired-aux" "\
+Set up isearch to search in Dired file names.
+Intended to be added to `isearch-mode-hook'.
+
+\(fn)" nil nil)
+
+(autoload 'dired-isearch-filenames "dired-aux" "\
+Search for a string using Isearch only in file names in the Dired buffer.
+
+\(fn)" t nil)
+
+(autoload 'dired-isearch-filenames-regexp "dired-aux" "\
+Search for a regexp using Isearch only in file names in the Dired buffer.
+
+\(fn)" t nil)
+
+(autoload 'dired-do-isearch "dired-aux" "\
+Search for a string through all marked files using Isearch.
+
+\(fn)" t nil)
+
+(autoload 'dired-do-isearch-regexp "dired-aux" "\
+Search for a regexp through all marked files using Isearch.
+
+\(fn)" t nil)
+
+(autoload 'dired-do-search "dired-aux" "\
+Search through all marked files for a match for REGEXP.
+Stops when a match is found.
+To continue searching for next match, use command \\[tags-loop-continue].
+
+\(fn REGEXP)" t nil)
+
+(autoload 'dired-do-query-replace-regexp "dired-aux" "\
+Do `query-replace-regexp' of FROM with TO, on all marked files.
+Third arg DELIMITED (prefix arg) means replace only word-delimited matches.
+If you exit (\\[keyboard-quit], RET or q), you can resume the query replace
+with the command \\[tags-loop-continue].
+
+\(fn FROM TO &optional DELIMITED)" t nil)
+
+(autoload 'dired-show-file-type "dired-aux" "\
+Print the type of FILE, according to the `file' command.
+If FILE is a symbolic link and the optional argument DEREF-SYMLINKS is
+true then the type of the file linked to by FILE is printed instead.
+
+\(fn FILE &optional DEREF-SYMLINKS)" t nil)
+
+;;;***
+
+;;;### (autoloads (dired-do-relsymlink dired-jump) "dired-x" "dired-x.el"
+;;;;;;  "c426566bb1493ccba92a56f402ba565f")
+;;; Generated autoloads from dired-x.el
+
+(autoload 'dired-jump "dired-x" "\
+Jump to dired buffer corresponding to current buffer.
+If in a file, dired the current directory and move to file's line.
+If in Dired already, pop up a level and goto old directory's line.
+In case the proper dired file line cannot be found, refresh the dired
+buffer and try again.
+
+\(fn &optional OTHER-WINDOW)" t nil)
+
+(autoload 'dired-do-relsymlink "dired-x" "\
+Relative symlink all marked (or next ARG) files into a directory.
+Otherwise make a relative symbolic link to the current file.
+This creates relative symbolic links like
+
+    foo -> ../bar/foo
+
+not absolute ones like
+
+    foo -> /ugly/file/name/that/may/change/any/day/bar/foo
+
+For absolute symlinks, use \\[dired-do-symlink].
+
+\(fn &optional ARG)" t nil)
+
+;;;***
+
+;;; End of automatically extracted autoloads.
+
 (provide 'dired)
 
 (run-hooks 'dired-load-hook)           ; for your customizations