[Emacs-diffs] /srv/bzr/emacs/trunk r108076: Auto-commit of generated files.

[Glenn Morris]

------------------------------------------------------------
revno: 108076
committer: Glenn Morris <address@hidden>
branch nick: trunk
timestamp: Tue 2012-05-01 06:17:25 -0400
message:
  Auto-commit of generated files.
modified:
  autogen/Makefile.in
  autogen/config.in
  autogen/configure

=== modified file 'autogen/Makefile.in'
--- a/autogen/Makefile.in       2012-04-22 10:18:54 +0000
+++ b/autogen/Makefile.in       2012-05-01 10:17:25 +0000
@@ -488,8 +488,7 @@
 LD_SWITCH_SYSTEM = @LD_SWITCH_SYSTEM@
 LD_SWITCH_SYSTEM_TEMACS = @LD_SWITCH_SYSTEM_TEMACS@
 LD_SWITCH_X_SITE = @LD_SWITCH_X_SITE@
-LD_SWITCH_X_SITE_AUX = @LD_SWITCH_X_SITE_AUX@
-LD_SWITCH_X_SITE_AUX_RPATH = @LD_SWITCH_X_SITE_AUX_RPATH@
+LD_SWITCH_X_SITE_RPATH = @LD_SWITCH_X_SITE_RPATH@
 LIBGIF = @LIBGIF@
 LIBGNUTLS_CFLAGS = @LIBGNUTLS_CFLAGS@
 LIBGNUTLS_LIBS = @LIBGNUTLS_LIBS@

=== modified file 'autogen/config.in'
--- a/autogen/config.in 2012-04-23 10:17:30 +0000
+++ b/autogen/config.in 2012-05-01 10:17:25 +0000
@@ -474,9 +474,6 @@
 /* Define to 1 if you have the `mail' library (-lmail). */
 #undef HAVE_LIBMAIL
 
-/* Define to 1 if you have the `ncurses' library (-lncurses). */
-#undef HAVE_LIBNCURSES
-
 /* Define to 1 if using libotf. */
 #undef HAVE_LIBOTF
 

=== modified file 'autogen/configure'
--- a/autogen/configure 2012-04-23 10:17:30 +0000
+++ b/autogen/configure 2012-05-01 10:17:25 +0000
@@ -1164,8 +1164,7 @@
 NS_OBJC_OBJ
 NS_OBJ
 TEMACS_LDFLAGS2
-LD_SWITCH_X_SITE_AUX_RPATH
-LD_SWITCH_X_SITE_AUX
+LD_SWITCH_X_SITE_RPATH
 XMKMF
 DEPFLAGS
 MKDEPDIR
@@ -8359,7 +8358,7 @@
 
 ac_link="$ac_link $LD_SWITCH_SYSTEM"
 
-## This setting of LD_SWITCH_SYSTEM references LD_SWITCH_X_SITE_AUX,
+## This setting of LD_SWITCH_SYSTEM references LD_SWITCH_X_SITE_RPATH,
 ## which has not been defined yet.  When this was handled with cpp,
 ## it was expanded to null when configure sourced the s/*.h file.
 ## Thus LD_SWITCH_SYSTEM had different values in configure and the Makefiles.
@@ -8371,8 +8370,7 @@
 ## LD_SWITCH_SYSTEM_TEMACS.
 case "$opsys" in
   netbsd|openbsd)
-   ## _AUX_RPATH is like _AUX, but uses -rpath instead of -R.
-   LD_SWITCH_SYSTEM="\$(LD_SWITCH_X_SITE_AUX_RPATH) $LD_SWITCH_SYSTEM" ;;
+   LD_SWITCH_SYSTEM="\$(LD_SWITCH_X_SITE_RPATH) $LD_SWITCH_SYSTEM" ;;
 esac
 
 
@@ -10253,13 +10251,11 @@
   window_system=x11
 fi
 
-LD_SWITCH_X_SITE_AUX=
-LD_SWITCH_X_SITE_AUX_RPATH=
+LD_SWITCH_X_SITE_RPATH=
 if test "${x_libraries}" != NONE; then
   if test -n "${x_libraries}"; then
     LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
-    LD_SWITCH_X_SITE_AUX=-R`echo ${x_libraries} | sed -e "s/:/ -R/g"`
-    LD_SWITCH_X_SITE_AUX_RPATH=`echo ${LD_SWITCH_X_SITE_AUX} | sed -e 
's/-R/-Wl,-rpath,/'`
+    LD_SWITCH_X_SITE_RPATH=-Wl,-rpath,`echo ${x_libraries} | sed -e "s/:/ 
-Wl,-rpath,/g"`
   fi
   x_default_search_path=""
   x_search_path=${x_libraries}
@@ -10284,7 +10280,6 @@
 fi
 
 
-
 if test "${x_includes}" != NONE && test -n "${x_includes}"; then
   C_SWITCH_X_SITE="$isystem"`echo ${x_includes} | sed -e "s/:/ $isystem/g"`
 fi
@@ -11089,9 +11084,9 @@
   CPPFLAGS="$C_SWITCH_X_SITE $CPPFLAGS"
 
   # On Solaris, arrange for LD_RUN_PATH to point to the X libraries for tests.
-  # This is handled by LD_SWITCH_X_SITE_AUX during the real build,
-  # but it's more convenient here to set LD_RUN_PATH
-  # since this also works on hosts that don't understand LD_SWITCH_X_SITE_AUX.
+  # This is handled by LD_SWITCH_X_SITE_RPATH during the real build,
+  # but it's more convenient here to set LD_RUN_PATH since this
+  # also works on hosts that don't understand LD_SWITCH_X_SITE_RPATH.
   if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then
     LD_RUN_PATH=$x_libraries${LD_RUN_PATH+:}$LD_RUN_PATH
     export LD_RUN_PATH
@@ -14818,7 +14813,7 @@
 
 # Maybe curses should be tried earlier?
 # See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=9736#35
-for tputs_library in '' ncurses terminfo termcap curses; do
+for tputs_library in '' tinfo ncurses terminfo termcap curses; do
   OLIBS=$LIBS
   if test -z "$tputs_library"; then
     LIBS_TERMCAP=
@@ -14879,42 +14874,28 @@
 $as_echo "$msg" >&6; }
 if test "X$msg" = Xno; then
   as_fn_error "The required function \`tputs' was not found in any library.
-These libraries were tried: libncurses, libterminfo, libtermcap, libcurses.
+The following libraries were tried (in order):
+  libtinfo, libncurses, libterminfo, libtermcap, libcurses
 Please try installing whichever of these libraries is most appropriate
 for your system, together with its header files.
 For example, a libncurses-dev(el) or similar package." "$LINENO" 5
 fi
-# Must define this when any termcap library is found.
-
-$as_echo "#define HAVE_LIBNCURSES 1" >>confdefs.h
-
-## FIXME This was the cpp logic, but I am not sure it is right.
-## The above test has not necessarily found libncurses.
-HAVE_LIBNCURSES=yes
-
-## Use terminfo instead of termcap?
-## Note only system files NOT using terminfo are:
-## freebsd < 40000, ms-w32, msdos, netbsd < 599002500, and
-## darwin|gnu without ncurses.
-TERMINFO=no
+
+## Use termcap instead of terminfo?
+## Only true for: freebsd < 40000, ms-w32, msdos, netbsd < 599002500.
+TERMINFO=yes
+## FIXME?  In the cases below where we unconditionally set
+## LIBS_TERMCAP="-lncurses", this overrides LIBS_TERMCAP = -ltinfo,
+## if that was found above to have tputs.
+## Should we use the gnu* logic everywhere?
 case "$opsys" in
-  ## cygwin: Fewer environment variables to go wrong, more terminal types.
-  ## hpux10-20: Use the system provided termcap(3) library.
-  ## openbsd: David Mazieres <address@hidden> says this
-  ##  is necessary.  Otherwise Emacs dumps core when run -nw.
-  aix4-2|cygwin|hpux*|irix6-5|openbsd|sol2*|unixware) TERMINFO=yes ;;
-
   ## darwin: Prevents crashes when running Emacs in Terminal.app under 10.2.
   ##  The ncurses library has been moved out of the System framework in
   ##  Mac OS X 10.2.  So if configure detects it, set the command-line
   ##  option to use it.
-  darwin|gnu*)
-    ## (HAVE_LIBNCURSES was not always true, but is since 2010-03-18.)
-    if test "x$HAVE_LIBNCURSES" = "xyes"; then
-      TERMINFO=yes
-      LIBS_TERMCAP="-lncurses"
-    fi
-    ;;
+  darwin) LIBS_TERMCAP="-lncurses" ;;
+
+  gnu*)  "x$LIBS_TERMCAP" = x  && LIBS_TERMCAP="-lncurses" ;;
 
   freebsd)
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether FreeBSD is new 
enough to use terminfo" >&5
@@ -14950,34 +14931,31 @@
 $as_echo "$emacs_cv_freebsd_terminfo" >&6; }
 
     if test $emacs_cv_freebsd_terminfo = yes; then
-      TERMINFO=yes
       LIBS_TERMCAP="-lncurses"
     else
+      TERMINFO=no
       LIBS_TERMCAP="-ltermcap"
     fi
     ;;
 
   netbsd)
     if test $ac_cv_search_tputs = -lterminfo; then
-      TERMINFO=yes
       LIBS_TERMCAP="-lterminfo"
     else
+      TERMINFO=no
       LIBS_TERMCAP="-ltermcap"
     fi
     ;;
 
-esac
+  openbsd) LIBS_TERMCAP="-lncurses" ;;
 
-case "$opsys" in
   ## hpux: Make sure we get select from libc rather than from libcurses
   ##  because libcurses on HPUX 10.10 has a broken version of select.
   ##  We used to use -lc -lcurses, but this may be cleaner.
+  ## FIXME?  But TERMINFO = yes on hpux (it used to be explicitly
+  # set that way, now it uses the default).  Isn't this a contradiction?
   hpux*) LIBS_TERMCAP="-ltermcap" ;;
 
-  openbsd) LIBS_TERMCAP="-lncurses" ;;
-
-  ## Must use system termcap, if we use any termcap.  It does special things.
-  sol2*) test "$TERMINFO" != yes && LIBS_TERMCAP="-ltermcap" ;;
 esac
 
 TERMCAP_OBJ=tparam.o
@@ -22854,13 +22832,14 @@
      LD_SWITCH_SYSTEM_TEMACS="-X $LD_SWITCH_SYSTEM_TEMACS"
    ;;
 
-  ## LD_SWITCH_X_SITE_AUX is a -R option saying where to find X at run-time.
-  ## When handled by cpp, this was in LD_SWITCH_SYSTEM.  However, at
-  ## the point where configure sourced the s/*.h file, LD_SWITCH_X_SITE_AUX
+  ## LD_SWITCH_X_SITE_RPATH is a -rpath option saying where to
+  ## find X at run-time.
+  ## When handled by cpp, this was in LD_SWITCH_SYSTEM.  However, at the
+  ## point where configure sourced the s/*.h file, LD_SWITCH_X_SITE_RPATH
   ## had not yet been defined and was expanded to null.  Hence LD_SWITCH_SYSTEM
   ## had different values in configure (in ac_link) and src/Makefile.in.
   ## It seems clearer therefore to put this piece in LD_SWITCH_SYSTEM_TEMACS.
-  gnu*) LD_SWITCH_SYSTEM_TEMACS="\$(LD_SWITCH_X_SITE_AUX_RPATH)" ;;
+  gnu*) LD_SWITCH_SYSTEM_TEMACS="\$(LD_SWITCH_X_SITE_RPATH)" ;;
 
   *) LD_SWITCH_SYSTEM_TEMACS= ;;
 esac