[Emacs-diffs] master 9cf8454: Improve documentation of Tab bars

[Eli Zaretskii]

branch: master
commit 9cf8454463ab0249c3b680f892507743b3be972e
Author: Eli Zaretskii <address@hidden>
Commit: Eli Zaretskii <address@hidden>

    Improve documentation of Tab bars
    
    * doc/emacs/frames.texi (Menu Bars, Tool Bars, Tab Bars):
    Don't start index entries from a capital letter.
    (Tab Bars): Improve wording and indexing.
    
    * etc/NEWS: Improve documentation of Tab bars.
---
 doc/emacs/frames.texi | 58 +++++++++++++++++++++++++--------------------------
 etc/NEWS              | 51 ++++++++++++++++++++++----------------------
 2 files changed, 53 insertions(+), 56 deletions(-)

diff --git a/doc/emacs/frames.texi b/doc/emacs/frames.texi
index 0cb9c4e..2acc65c 100644
--- a/doc/emacs/frames.texi
+++ b/doc/emacs/frames.texi
@@ -1152,7 +1152,7 @@ cursor during dragging.  To suppress such behavior, set 
the options
 
 @node Menu Bars
 @section Menu Bars
-@cindex Menu Bar mode
+@cindex menu bar mode
 @cindex mode, Menu Bar
 @findex menu-bar-mode
 @vindex menu-bar-mode
@@ -1177,7 +1177,7 @@ menus' visual appearance.
 
 @node Tool Bars
 @section Tool Bars
-@cindex Tool Bar mode
+@cindex tool bar mode
 @cindex mode, Tool Bar
 @cindex icons, toolbar
 
@@ -1217,50 +1217,48 @@ displayed by moving the mouse pointer to the top of the 
screen.
 
 @node Tab Bars
 @section Tab Bars
-@cindex Tab Bar mode
+@cindex tab bar mode
 @cindex mode, Tab Bar
 @cindex tabs, tabbar
 
-  On graphical displays and on text terminals, Emacs puts a @dfn{tab bar}
-at the top of each frame, just below the menu bar.  This is a row of
-tabs which you can click on with the mouse to switch window configurations.
+  On graphical displays and on text terminals, Emacs can optionally
+display a @dfn{Tab Bar} at the top of each frame, just below the menu
+bar.  The Tab Bar is a row of @dfn{tabs}---buttons that you can click
+to switch between window configurations on that frame.
 
-  Each tab on the tab bar represents a named persistent window
-configuration.  Its name is composed from the names of buffers
-visible in windows of the window configuration.  Clicking on the
-tab name switches the current window configuration to the previously
-used configuration of windows and buffers.
+  Each tab on the Tab Bar represents a named persistent window
+configuration.  Its name is composed from the list of names of buffers
+visible in windows of that window configuration.  Clicking on the tab
+switches to the window configuration recorded by the tab; it is a
+configuration of windows and buffers which was previously used in the
+frame when that tab was the current tab.
 
   If you are using the desktop library to save and restore your
-sessions, the tabs from the tab bar are recorded in the desktop file,
-together with their associated window configurations.
+sessions (@pxref{Saving Emacs Sesions}), the tabs from the Tab Bar are
+recorded in the desktop file, together with their associated window
+configurations, and will be available after restoring the session.
 
 @findex tab-bar-mode
-@vindex tab-bar-mode
   To toggle the use of tab bars, type @kbd{M-x tab-bar-mode}.  This
 command applies to all frames, including frames yet to be created.  To
 control the use of tab bars at startup, customize the variable
 @code{tab-bar-mode}.
 
 @vindex tab-bar-show
-@cindex Tab Bar show
-  This variable is intended to toggle the tab bar automatically.
-When the value is @code{t}, then @code{tab-bar-mode} is enabled when
-using the commands that create new window configurations.  The value
-@code{1} hides the tab bar when it has only one tab, and shows it
-again once more tabs are created.  If @code{nil}, always keep the tab
-bar hidden.  In this case it's still possible to use persistent named
-window configurations without using the tab bar by relying on keyboard
-commands that create a new window configuration (@kbd{M-x tab-new}),
-that switch windows configurations (@kbd{M-x tab-next}, @kbd{M-x
-tab-list}), or delete the existing ones (@kbd{M-x tab-close}).
+  The variable @code{tab-bar-show} controls whether the Tab Bar mode
+is turned on automatically.  If the value is @code{t}, then
+@code{tab-bar-mode} is enabled when using the commands that create new
+tabs.  The value @code{1} hides the tab bar when it has only one tab,
+and shows it again when more tabs are created.  The value @code{nil}
+always keeps the tab bar hidden; in this case it's still possible to
+use persistent named window configurations without using the tab bar
+by typing the related commands: @kbd{M-x tab-new}, @kbd{M-x tab-next},
+@kbd{M-x tab-list}, @kbd{M-x tab-close}, etc.
 
 @vindex tab-bar-new-tab-choice
-@cindex Tab Bar new tab
-  By default, Emacs follows the same behavior as when creating frames,
-to start a new tab with the current buffer, i.e. the buffer
-that was current before calling the command that adds a new tab.
-To start a new tab with other buffers, customize the variable
+  By default, a new tab starts with the current buffer that was
+current before calling the command that adds a new tab.  To start a
+new tab with other buffers, customize the variable
 @code{tab-bar-new-tab-choice}.
 
 @node Dialog Boxes
diff --git a/etc/NEWS b/etc/NEWS
index db90e8e..cadd6d9 100644
--- a/etc/NEWS
+++ b/etc/NEWS
@@ -2040,33 +2040,32 @@ file-local variable, you may need to update the value.
 
 * New Modes and Packages in Emacs 27.1
 
-** 'tab-bar-mode' enables the tab-bar at the top of each frame,
-to switch named persistent window configurations in it using tabs.
-New tab-based keybindings (similar to frame-based commands):
-'C-x 6 2' creates a new tab;
-'C-x 6 0' deletes the current tab;
-'C-x 6 b' switches to buffer in another tab;
-'C-x 6 f' and 'C-x 6 C-f' edit file in another tab;
-'C-TAB' switches to the next tab;
-'S-C-TAB' switches to the previous tab.
-
-Also it's possible to switch named persistent window configurations
-without having graphical access to the tab-bar, even on a tty
-or when 'tab-bar-mode' is disabled, with these commands:
-'tab-new' creates a new window configuration;
-'tab-close' deletes the current window configuration;
-'tab-select' switches to the window configuration by its name;
-'tab-previous' switches to the previous window configuration;
-'tab-next' switches to the next window configuration;
-'tab-list' displays a list of named window configurations for switching.
-
-** 'global-tab-line-mode' enables the tab-line above each window to
-switch buffers in it to previous/next buffers.  Selecting a previous
-window-local tab is the same as running 'C-x <left>' (previous-buffer),
-selecting a next tab switches to the tab available by 'C-x <right>'
+** Tab Bars
+
++++
+*** Tab-Bar mode
+The new command 'tab-bar-mode' enables the tab-bar at the top of each
+frame, where you can use tabs to switch between named persistent
+window configurations.
+
+The 'C-x 6' sequence is the new prefix key for tab-related commands:
+'C-x 6 2' creates a new tab; 'C-x 6 0' deletes the current tab;
+'C-x 6 b' switches to buffer in another tab; 'C-x 6 f' and 'C-x 6 C-f'
+edit file in another tab; and 'C-TAB' and 'S-C-TAB' switch to the next
+or previous tab.  You can also switch between tabs and create/delete
+tabs with a mouse.
+
+Tab-related commands are available even when the Tab-Bar mode is
+disabled: by default, they enable Tab-Bar mode in that case.
+
+*** Tab-Line mode
+The new command 'global-tab-line-mode' enables the tab-line above each
+window, which you can use to switch buffers in the window.  Selecting
+the previous window-local tab is the same as typing 'C-x <LEFT>'
+(previous-buffer), selecting the next tab is the same as 'C-x <RIGHT>'
 (next-buffer).  Clicking on the plus icon adds a new buffer to the
-window-local tab-line of window buffers.  Using the mouse wheel on the
-tab-line scrolls the window buffers whose names are displayed in tabs.
+window-local tab-line of buffers.  Using the mouse wheel on the
+tab-line scrolls tabs that display the window buffers.
 
 ** fileloop.el lets one setup multifile operations like search&replace.