[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[elpa] externals/transient 2c7624e9e0 01/14: manual: Use "kbd" macro exp
From: |
Jonas Bernoulli |
Subject: |
[elpa] externals/transient 2c7624e9e0 01/14: manual: Use "kbd" macro explicitly |
Date: |
Sat, 6 Aug 2022 10:35:50 -0400 (EDT) |
branch: externals/transient
commit 2c7624e9e092b7e55ad055ae623d1023530cd3b8
Author: Jonas Bernoulli <jonas@bernoul.li>
Commit: Jonas Bernoulli <jonas@bernoul.li>
manual: Use "kbd" macro explicitly
---
docs/transient.org | 89 ++++++++++++++++++++++++++-------------------------
docs/transient.texi | 92 +++++++++++++++++++++++++++--------------------------
2 files changed, 92 insertions(+), 89 deletions(-)
diff --git a/docs/transient.org b/docs/transient.org
index 7d111bc4bf..9055089a7c 100644
--- a/docs/transient.org
+++ b/docs/transient.org
@@ -127,7 +127,7 @@ Transient can be used to implement simple "command
dispatchers". The
main benefit then is that the user can see all the available commands
in a popup buffer. That is useful by itself because it frees the user
from having to remember all the keys that are valid after a certain
-prefix key or command. Magit's ~magit-dispatch~ (on ~C-x M-g~) command is
+prefix key or command. Magit's ~magit-dispatch~ (on {{{kbd(C-x M-g)}}})
command is
an example of using Transient to merely implement a command
dispatcher.
@@ -154,10 +154,10 @@ arguments, and previously it was invoked using those
other arguments"),
but also remembers the values of individual arguments independently.
See [[*Using History]].
-After a transient prefix command is invoked, ~C-h <key>~ can be used to
-show the documentation for the infix or suffix command that ~<key>~ is
+After a transient prefix command is invoked, {{{kbd(C-h <key>)}}} can be used
to
+show the documentation for the infix or suffix command that {{{kbd(<key>)}}} is
bound to (see [[*Getting Help for Suffix Commands]]) and infixes and
-suffixes can be removed from the transient using ~C-x l <key>~. Infixes
+suffixes can be removed from the transient using {{{kbd(C-x l <key>)}}}.
Infixes
and suffixes that are disabled by default can be enabled the same way.
See [[*Enabling and Disabling Suffixes]].
@@ -195,25 +195,25 @@ value of some variable.
#+cindex: resuming transients
#+cindex: quit transient
-To quit the transient without invoking a suffix command press ~C-g~.
+To quit the transient without invoking a suffix command press {{{kbd(C-g)}}}.
Key bindings in transient keymaps may be longer than a single event.
After pressing a valid prefix key, all commands whose bindings do not
begin with that prefix key are temporarily unavailable and grayed out.
-To abort the prefix key press ~C-g~ (which in this case only quits the
+To abort the prefix key press {{{kbd(C-g)}}} (which in this case only quits the
prefix key, but not the complete transient).
A transient prefix command can be bound as a suffix of another
transient. Invoking such a suffix replaces the current transient
state with a new transient state, i.e., the available bindings change
and the information displayed in the popup buffer is updated
-accordingly. Pressing ~C-g~ while a nested transient is active only
+accordingly. Pressing {{{kbd(C-g)}}} while a nested transient is active only
quits the innermost transient, causing a return to the previous
transient.
-~C-q~ or ~C-z~ on the other hand always exits all transients. If you use
+{{{kbd(C-q)}}} or {{{kbd(C-z)}}} on the other hand always exits all
transients. If you use
the latter, then you can later resume the stack of transients using
-~M-x transient-resume~.
+{{{kbd(M-x transient-resume)}}}.
#+attr_texinfo: :compact t
- Key: C-g (transient-quit-seq) ::
@@ -223,7 +223,7 @@ the latter, then you can later resume the stack of
transients using
or else the current transient. When quitting the current transient,
it returns to the previous transient, if any.
-Transient's predecessor bound ~q~ instead of ~C-g~ to the quit command.
+Transient's predecessor bound {{{kbd(q)}}} instead of {{{kbd(C-g)}}} to the
quit command.
To learn how to get that binding back see ~transient-bind-q-to-quit~'s
doc string.
@@ -258,8 +258,8 @@ A few shared suffix commands are available in all
transients. These
suffix commands are not shown in the popup buffer by default.
This includes the aborting commands mentioned in the previous section,
-as well as some other commands that are all bound to ~C-x <key>~. After
-~C-x~ is pressed, a section featuring all these common commands is
+as well as some other commands that are all bound to {{{kbd(C-x <key>)}}}.
After
+{{{kbd(C-x)}}} is pressed, a section featuring all these common commands is
temporarily shown in the popup buffer. After invoking one of them,
the section disappears again. Note however that one of these commands
is described as "Show common permanently"; invoke that if you want the
@@ -269,7 +269,7 @@ common commands to always be shown for all transients.
This command toggles whether the generic commands that are common to
all transients are always displayed or only after typing the
- incomplete prefix key sequence ~C-x~. This only affects the current
+ incomplete prefix key sequence {{{kbd(C-x)}}}. This only affects the current
Emacs session.
- User Option: transient-show-common-commands ::
@@ -279,9 +279,9 @@ common commands to always be shown for all transients.
default, the shared commands are not shown to avoid overwhelming
the user with to. many options.
- While a transient is active, pressing ~C-x~ always shows the common
+ While a transient is active, pressing {{{kbd(C-x)}}} always shows the common
commands. The value of this option can be changed for the current
- Emacs session by typing ~C-x t~ while a transient is active.
+ Emacs session by typing {{{kbd(C-x t)}}} while a transient is active.
The other common commands are described in either the previous or in
one of the following sections.
@@ -384,11 +384,11 @@ transient.
This command enters help mode. When help mode is active, typing a
key shows information about the suffix command that the key normally
- is bound to (instead of invoking it). Pressing ~C-h~ a second time
+ is bound to (instead of invoking it). Pressing {{{kbd(C-h)}}} a second time
shows information about the /prefix/ command.
After typing a key, the stack of transient states is suspended and
- information about the suffix command is shown instead. Typing ~q~ in
+ information about the suffix command is shown instead. Typing {{{kbd(q)}}}
in
the help buffer buries that buffer and resumes the transient state.
What sort of documentation is shown depends on how the transient was
@@ -420,7 +420,7 @@ displayed at any level.
The levels of individual transients and/or their individual suffixes
can be changed interactively, by invoking the transient and then
-pressing ~C-x l~ to enter the "edit" mode, see below.
+pressing {{{kbd(C-x l)}}} to enter the "edit" mode, see below.
The default level for both transients and their suffixes is 4. The
~transient-default-level~ option only controls the default for
@@ -455,9 +455,9 @@ available even if the user lowers the transient level.
Help mode is available in edit mode.
- To change the transient level press ~C-x l~ again.
+ To change the transient level press {{{kbd(C-x l)}}} again.
- To exit edit mode press ~C-g~.
+ To exit edit mode press {{{kbd(C-g)}}}.
Note that edit mode does not display any suffixes that are not
currently usable. ~magit-rebase~, for example, shows different
@@ -530,11 +530,11 @@ Also see [[* Common Suffix Commands]].
on that buffer itself. This is disabled by default. If this option
is non-~nil~, then the following features are available:
- - ~<up>~ moves the cursor to the previous suffix.
- ~<down>~ moves the cursor to the next suffix.
- ~RET~ invokes the suffix the cursor is on.
- - ~<mouse-1>~ invokes the clicked on suffix.
- - ~C-s~ and ~C-r~ start isearch in the popup buffer.
+ - {{{kbd(UP)}}} moves the cursor to the previous suffix.
+ - {{{kbd(DOWN)}}} moves the cursor to the next suffix.
+ - {{{kbd(RET)}}} invokes the suffix the cursor is on.
+ - {{{kbd(mouse-1)}}} invokes the clicked on suffix.
+ - {{{kbd(C-s)}}} and {{{kbd(C-r)}}} start isearch in the popup buffer.
- User Option: transient-display-buffer-action ::
@@ -656,8 +656,8 @@ Also see [[* Common Suffix Commands]].
replaces the prefix key. It could be used to make other
substitutions, but that is discouraged.
- For example, ~=~ is hard to reach using my custom keyboard layout,
- so I substitute ~(~ for that, which is easy to reach using a layout
+ For example, {{{kbd(=)}}} is hard to reach using my custom keyboard layout,
+ so I substitute {{{kbd(()}}} for that, which is easy to reach using a layout
optimized for lisp.
#+BEGIN_SRC emacs-lisp
@@ -1253,7 +1253,7 @@ configurable per transient.
- A suffix command can be a prefix command itself, i.e., a
"sub-prefix". While a sub-prefix is active we nearly always want
- ~C-g~ to take the user back to the "super-prefix". However in rare
+ {{{kbd(C-g)}}} to take the user back to the "super-prefix". However in rare
cases this may not be desirable, and that makes the following
complication necessary:
@@ -1379,19 +1379,19 @@ slot.
If active, quit help or edit mode, else exit the active transient.
- This is used when the user pressed ~C-g~.
+ This is used when the user pressed {{{kbd(C-g)}}}.
- Function: transient--do-quit-all ::
Exit all transients without saving the transient stack.
- This is used when the user pressed ~C-q~.
+ This is used when the user pressed {{{kbd(C-q)}}}.
- Function: transient--do-suspend ::
Suspend the active transient, saving the transient stack.
- This is used when the user pressed ~C-z~.
+ This is used when the user pressed {{{kbd(C-z)}}}.
* Classes and Methods
#+cindex: classes and methods
@@ -2203,7 +2203,7 @@ Yes, see ~transient-display-buffer-action~ in
[[*Configuration]].
:END:
You may have noticed that the bindings for some of the common commands
-do *not* have the prefix ~C-x~ and that furthermore some of these commands
+do *not* have the prefix {{{kbd(C-x)}}} and that furthermore some of these
commands
are grayed out while others are not. That unfortunately is a bit
confusing if the section of common commands is not shown permanently,
making the following explanation necessary.
@@ -2223,43 +2223,43 @@ other* transient-specific prefix. The non-prefix keys
that *are* grayed
out however, are not available when any incomplete prefix key sequence
is active. They do not use the "common command key prefix" because it
is likely that users want to invoke them several times in a row and
-e.g., ~M-p M-p M-p~ is much more convenient than ~C-x M-p C-x M-p C-x M-p~.
+e.g., {{{kbd(M-p M-p M-p)}}} is much more convenient than {{{kbd(C-x M-p C-x
M-p C-x M-p)}}}.
-You may also have noticed that the "Set" command is bound to ~C-x s~,
-while Magit-Popup used to bind ~C-c C-c~ instead. I have seen several
+You may also have noticed that the "Set" command is bound to {{{kbd(C-x s)}}},
+while Magit-Popup used to bind {{{kbd(C-c C-c)}}} instead. I have seen several
users praise the latter binding (sic), so I did not change it
willy-nilly. The reason that I changed it is that using different
prefix keys for different common commands, would have made the
temporary display of the common commands even more confusing,
-i.e., after pressing ~C-c~ all the ~C-x ...~ bindings would be grayed out.
+i.e., after pressing {{{kbd(C-c)}}} all the {{{kbd(C-x ...)}}} bindings would
be grayed out.
Using a single prefix for common commands key means that all other
potential prefix keys can be used for transient-specific commands
-*without* the section of common commands also popping up. ~C-c~ in
+*without* the section of common commands also popping up. {{{kbd(C-c)}}} in
particular is a prefix that I want to (and already do) use for Magit, and
also using that for a common command would prevent me from doing so.
(Also see the next question.)
-** Why does ~q~ not quit popups anymore?
+** Why does {{{kbd(q)}}} not quit popups anymore?
:PROPERTIES:
:UNNUMBERED: notoc
:END:
-I agree that ~q~ is a good binding for commands that quit something.
+I agree that {{{kbd(q)}}} is a good binding for commands that quit something.
This includes quitting whatever transient is currently active, but it
also includes quitting whatever it is that some specific transient is
-controlling. The transient ~magit-blame~ for example binds ~q~ to the
+controlling. The transient ~magit-blame~ for example binds {{{kbd(q)}}} to the
command that turns ~magit-blame-mode~ off.
-So I had to decide if ~q~ should quit the active transient (like
-Magit-Popup used to) or whether ~C-g~ should do that instead, so that ~q~
+So I had to decide if {{{kbd(q)}}} should quit the active transient (like
+Magit-Popup used to) or whether {{{kbd(C-g)}}} should do that instead, so that
{{{kbd(q)}}}
could be bound in individual transient to whatever commands make sense
for them. Because all other letters are already reserved for use by
individual transients, I have decided to no longer make an exception
-for ~q~.
+for {{{kbd(q)}}}.
-If you want to get ~q~'s old binding back then you can do so. Doing
+If you want to get {{{kbd(q)}}}'s old binding back then you can do so. Doing
that is a bit more complicated than changing a single key binding, so
I have implemented a function, ~transient-bind-q-to-quit~ that makes the
necessary changes. See its doc string for more information.
@@ -2317,5 +2317,6 @@ General Public License for more details.
# IMPORTANT: Also update ORG_ARGS and ORG_EVAL in the Makefile.
# Local Variables:
# indent-tabs-mode: nil
+# org-hide-macro-markers: t
# org-src-preserve-indentation: nil
# End:
diff --git a/docs/transient.texi b/docs/transient.texi
index 6ee2d625c4..b844e3a8dc 100644
--- a/docs/transient.texi
+++ b/docs/transient.texi
@@ -232,7 +232,7 @@ Transient can be used to implement simple "command
dispatchers". The
main benefit then is that the user can see all the available commands
in a popup buffer. That is useful by itself because it frees the user
from having to remember all the keys that are valid after a certain
-prefix key or command. Magit's @code{magit-dispatch} (on @code{C-x M-g})
command is
+prefix key or command. Magit's @code{magit-dispatch} (on @kbd{C-x M-g})
command is
an example of using Transient to merely implement a command
dispatcher.
@@ -259,10 +259,10 @@ arguments, and previously it was invoked using those
other arguments"),
but also remembers the values of individual arguments independently.
See @ref{Using History}.
-After a transient prefix command is invoked, @code{C-h <key>} can be used to
-show the documentation for the infix or suffix command that @code{<key>} is
+After a transient prefix command is invoked, @kbd{C-h <key>} can be used to
+show the documentation for the infix or suffix command that @kbd{<key>} is
bound to (see @ref{Getting Help for Suffix Commands}) and infixes and
-suffixes can be removed from the transient using @code{C-x l <key>}. Infixes
+suffixes can be removed from the transient using @kbd{C-x l <key>}. Infixes
and suffixes that are disabled by default can be enabled the same way.
See @ref{Enabling and Disabling Suffixes}.
@@ -318,25 +318,25 @@ value of some variable.
@cindex resuming transients
@cindex quit transient
-To quit the transient without invoking a suffix command press @code{C-g}.
+To quit the transient without invoking a suffix command press @kbd{C-g}.
Key bindings in transient keymaps may be longer than a single event.
After pressing a valid prefix key, all commands whose bindings do not
begin with that prefix key are temporarily unavailable and grayed out.
-To abort the prefix key press @code{C-g} (which in this case only quits the
+To abort the prefix key press @kbd{C-g} (which in this case only quits the
prefix key, but not the complete transient).
A transient prefix command can be bound as a suffix of another
transient. Invoking such a suffix replaces the current transient
state with a new transient state, i.e., the available bindings change
and the information displayed in the popup buffer is updated
-accordingly. Pressing @code{C-g} while a nested transient is active only
+accordingly. Pressing @kbd{C-g} while a nested transient is active only
quits the innermost transient, causing a return to the previous
transient.
-@code{C-q} or @code{C-z} on the other hand always exits all transients. If
you use
+@kbd{C-q} or @kbd{C-z} on the other hand always exits all transients. If you
use
the latter, then you can later resume the stack of transients using
-@code{M-x transient-resume}.
+@kbd{M-x transient-resume}.
@table @asis
@item @kbd{C-g} (@code{transient-quit-seq})
@@ -350,7 +350,7 @@ or else the current transient. When quitting the current
transient,
it returns to the previous transient, if any.
@end table
-Transient's predecessor bound @code{q} instead of @code{C-g} to the quit
command.
+Transient's predecessor bound @kbd{q} instead of @kbd{C-g} to the quit command.
To learn how to get that binding back see @code{transient-bind-q-to-quit}'s
doc string.
@@ -391,8 +391,8 @@ A few shared suffix commands are available in all
transients. These
suffix commands are not shown in the popup buffer by default.
This includes the aborting commands mentioned in the previous section,
-as well as some other commands that are all bound to @code{C-x <key>}. After
-@code{C-x} is pressed, a section featuring all these common commands is
+as well as some other commands that are all bound to @kbd{C-x <key>}. After
+@kbd{C-x} is pressed, a section featuring all these common commands is
temporarily shown in the popup buffer. After invoking one of them,
the section disappears again. Note however that one of these commands
is described as "Show common permanently"; invoke that if you want the
@@ -404,7 +404,7 @@ common commands to always be shown for all transients.
@findex transient-toggle-common
This command toggles whether the generic commands that are common to
all transients are always displayed or only after typing the
-incomplete prefix key sequence @code{C-x}. This only affects the current
+incomplete prefix key sequence @kbd{C-x}. This only affects the current
Emacs session.
@end table
@@ -414,9 +414,9 @@ alongside the transient-specific infix and suffix commands.
By
default, the shared commands are not shown to avoid overwhelming
the user with to. many options.
-While a transient is active, pressing @code{C-x} always shows the common
+While a transient is active, pressing @kbd{C-x} always shows the common
commands. The value of this option can be changed for the current
-Emacs session by typing @code{C-x t} while a transient is active.
+Emacs session by typing @kbd{C-x t} while a transient is active.
@end defopt
The other common commands are described in either the previous or in
@@ -536,11 +536,11 @@ transient.
@findex transient-help
This command enters help mode. When help mode is active, typing a
key shows information about the suffix command that the key normally
-is bound to (instead of invoking it). Pressing @code{C-h} a second time
+is bound to (instead of invoking it). Pressing @kbd{C-h} a second time
shows information about the @emph{prefix} command.
After typing a key, the stack of transient states is suspended and
-information about the suffix command is shown instead. Typing @code{q} in
+information about the suffix command is shown instead. Typing @kbd{q} in
the help buffer buries that buffer and resumes the transient state.
@end table
@@ -575,7 +575,7 @@ displayed at any level.
The levels of individual transients and/or their individual suffixes
can be changed interactively, by invoking the transient and then
-pressing @code{C-x l} to enter the "edit" mode, see below.
+pressing @kbd{C-x l} to enter the "edit" mode, see below.
The default level for both transients and their suffixes is 4. The
@code{transient-default-level} option only controls the default for
@@ -612,9 +612,9 @@ placed on.
Help mode is available in edit mode.
-To change the transient level press @code{C-x l} again.
+To change the transient level press @kbd{C-x l} again.
-To exit edit mode press @code{C-g}.
+To exit edit mode press @kbd{C-g}.
Note that edit mode does not display any suffixes that are not
currently usable. @code{magit-rebase}, for example, shows different
@@ -693,13 +693,15 @@ is non-@code{nil}, then the following features are
available:
@itemize
@item
-@code{<up>} moves the cursor to the previous suffix.
-@code{<down>} moves the cursor to the next suffix.
-@code{RET} invokes the suffix the cursor is on.
+@kbd{@key{UP}} moves the cursor to the previous suffix.
@item
-@code{<mouse-1>} invokes the clicked on suffix.
+@kbd{@key{DOWN}} moves the cursor to the next suffix.
@item
-@code{C-s} and @code{C-r} start isearch in the popup buffer.
+@kbd{@key{RET}} invokes the suffix the cursor is on.
+@item
+@kbd{mouse-1} invokes the clicked on suffix.
+@item
+@kbd{C-s} and @kbd{C-r} start isearch in the popup buffer.
@end itemize
@end defopt
@@ -816,8 +818,8 @@ description it finds in the @code{key} slot, or the key
description that
replaces the prefix key. It could be used to make other
substitutions, but that is discouraged.
-For example, @code{=} is hard to reach using my custom keyboard layout,
-so I substitute @code{(} for that, which is easy to reach using a layout
+For example, @kbd{=} is hard to reach using my custom keyboard layout,
+so I substitute @kbd{(} for that, which is easy to reach using a layout
optimized for lisp.
@lisp
@@ -1470,7 +1472,7 @@ essentially equivalent to it being @code{nil}.
@item
A suffix command can be a prefix command itself, i.e., a
"sub-prefix". While a sub-prefix is active we nearly always want
-@code{C-g} to take the user back to the "super-prefix". However in rare
+@kbd{C-g} to take the user back to the "super-prefix". However in rare
cases this may not be desirable, and that makes the following
complication necessary:
@@ -1589,19 +1591,19 @@ Call @code{transient-noop} and stay transient.
@defun transient--do-quit-one
If active, quit help or edit mode, else exit the active transient.
-This is used when the user pressed @code{C-g}.
+This is used when the user pressed @kbd{C-g}.
@end defun
@defun transient--do-quit-all
Exit all transients without saving the transient stack.
-This is used when the user pressed @code{C-q}.
+This is used when the user pressed @kbd{C-q}.
@end defun
@defun transient--do-suspend
Suspend the active transient, saving the transient stack.
-This is used when the user pressed @code{C-z}.
+This is used when the user pressed @kbd{C-z}.
@end defun
@node Classes and Methods
@@ -2528,7 +2530,7 @@ Yes, see @code{transient-display-buffer-action} in
@ref{Configuration}.
@appendixsec Why did some of the key bindings change?
You may have noticed that the bindings for some of the common commands
-do @strong{not} have the prefix @code{C-x} and that furthermore some of these
commands
+do @strong{not} have the prefix @kbd{C-x} and that furthermore some of these
commands
are grayed out while others are not. That unfortunately is a bit
confusing if the section of common commands is not shown permanently,
making the following explanation necessary.
@@ -2548,41 +2550,41 @@ other} transient-specific prefix. The non-prefix keys
that @strong{are} grayed
out however, are not available when any incomplete prefix key sequence
is active. They do not use the "common command key prefix" because it
is likely that users want to invoke them several times in a row and
-e.g., @code{M-p M-p M-p} is much more convenient than @code{C-x M-p C-x M-p
C-x M-p}.
+e.g., @kbd{M-p M-p M-p} is much more convenient than @kbd{C-x M-p C-x M-p C-x
M-p}.
-You may also have noticed that the "Set" command is bound to @code{C-x s},
-while Magit-Popup used to bind @code{C-c C-c} instead. I have seen several
+You may also have noticed that the "Set" command is bound to @kbd{C-x s},
+while Magit-Popup used to bind @kbd{C-c C-c} instead. I have seen several
users praise the latter binding (sic), so I did not change it
willy-nilly. The reason that I changed it is that using different
prefix keys for different common commands, would have made the
temporary display of the common commands even more confusing,
-i.e., after pressing @code{C-c} all the @code{C-x ...} bindings would be
grayed out.
+i.e., after pressing @kbd{C-c} all the @kbd{C-x @dots{}} bindings would be
grayed out.
Using a single prefix for common commands key means that all other
potential prefix keys can be used for transient-specific commands
-@strong{without} the section of common commands also popping up. @code{C-c} in
+@strong{without} the section of common commands also popping up. @kbd{C-c} in
particular is a prefix that I want to (and already do) use for Magit, and
also using that for a common command would prevent me from doing so.
(Also see the next question.)
-@anchor{Why does @code{q} not quit popups anymore?}
-@appendixsec Why does @code{q} not quit popups anymore?
+@anchor{Why does @kbd{q} not quit popups anymore?}
+@appendixsec Why does @kbd{q} not quit popups anymore?
-I agree that @code{q} is a good binding for commands that quit something.
+I agree that @kbd{q} is a good binding for commands that quit something.
This includes quitting whatever transient is currently active, but it
also includes quitting whatever it is that some specific transient is
-controlling. The transient @code{magit-blame} for example binds @code{q} to
the
+controlling. The transient @code{magit-blame} for example binds @kbd{q} to the
command that turns @code{magit-blame-mode} off.
-So I had to decide if @code{q} should quit the active transient (like
-Magit-Popup used to) or whether @code{C-g} should do that instead, so that
@code{q}
+So I had to decide if @kbd{q} should quit the active transient (like
+Magit-Popup used to) or whether @kbd{C-g} should do that instead, so that
@kbd{q}
could be bound in individual transient to whatever commands make sense
for them. Because all other letters are already reserved for use by
individual transients, I have decided to no longer make an exception
-for @code{q}.
+for @kbd{q}.
-If you want to get @code{q}'s old binding back then you can do so. Doing
+If you want to get @kbd{q}'s old binding back then you can do so. Doing
that is a bit more complicated than changing a single key binding, so
I have implemented a function, @code{transient-bind-q-to-quit} that makes the
necessary changes. See its doc string for more information.
- [elpa] externals/transient updated (389d2bffff -> a5562cbc8d), Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 2c7624e9e0 01/14: manual: Use "kbd" macro explicitly,
Jonas Bernoulli <=
- [elpa] externals/transient bcd9fbe22e 05/14: manual: Use new "dfn" macro, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 9cd69ef226 07/14: manual: Use double quotation marks (U+201C and U+201D), Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient eba78cb0b6 09/14: manual: Use more precise @dircategory, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 1b42da2a66 10/14: manual: Update copyright notice, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient a5562cbc8d 14/14: manual: Avoid texinfo complications, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient b49e79df00 04/14: manual: Use new "codevar" macro, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 86b24ebd76 03/14: manual: Use new "kbdvar" macro, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 5d116c7122 02/14: manual: Use new "var" macro, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 3ff531ba13 06/14: manual: Use "verbatim" emphasis markers, Jonas Bernoulli, 2022/08/06
- [elpa] externals/transient 1be2b72980 08/14: manual: Use verbatim instead of code in diagram legends, Jonas Bernoulli, 2022/08/06