[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ESPResSo-users] Simulation of fluid using LB-method

From: Wink, Markus
Subject: Re: [ESPResSo-users] Simulation of fluid using LB-method
Date: Thu, 30 Jan 2014 14:03:12 +0000

Hello everybody,

I tried to think about of the real position of the wall: 
"The (0, 0, 0) node of the LB lattice in Espresso is placed at (agrid/2, 
agrid/2, agrid/2)." 
In my case, I chose a_grid =1, so I put the walls at 1.5 and 51.5 in the 
simulation box. Thus the length of the simulation box is 53 in my case, gibing 
a channel width of 50. 
Am I right, or do you detect any mistake in my thoughts?

I am also puzzled with the negative slip velocity. Attached, you will find the 
simulation for a_grid = 0.5. I am not sure, but probably that helps.

Greets Markus

-----Urspr├╝ngliche Nachricht-----
Von: address@hidden [mailto:address@hidden Im Auftrag von Ulf Schiller
Gesendet: Donnerstag, 30. Januar 2014 14:47
An: address@hidden
Betreff: Re: [ESPResSo-users] Simulation of fluid using LB-method

On 01/30/2014 02:33 PM, Georg Rempfer wrote:
> Hey all,
> I remember that we fixed the issue with the missing 0.5*h*F some years
> ago. For a flat bounce-back wall aligned with the lattice axis, the
> actual hydrodynamic no-slip wall is positioned in the middle between the
> last fluid node and the first wall node.

There is still a viscosity dependent slip velocity, cf. Eq. (20) in [He 
et al. (1997), J. Stat. Phys. 87, 115].


Dr. Ulf D. Schiller                        Building 04.16, Room 3006
Institute of Complex Systems (ICS-2)       Phone:   +49 2461 61-6144
Forschungszentrum J├╝lich, Germany          Fax:     +49 2461 61-3180

reply via email to

[Prev in Thread] Current Thread [Next in Thread]