[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [fluid-dev] Are we release ready?

From: Bernd Casper
Subject: Re: Re: [fluid-dev] Are we release ready?
Date: Sun, 29 Aug 2010 17:59:49 +0200

Hi David,
with your kind advice, the CC91 issue is resolved, on my side. I'll inform the jOrganists that for ensuring full usability of CC91 in FS the soundfonts reverberation has to be set to 0%. Presently, AFAIK all our commonly used soundfonts are set to 100% reverb, so changing that controller in FS didn't show any result.
Thank you, Gents, you for all your efforts to make the great new features possible.

----- Folgende Nachricht wurde empfangen -----

Empfänger: bca
Zeit: 2010-08-29, 12:30:42
Betreff: Re: [fluid-dev] Are we release ready?
2010-08-28 18:43, Bernd Casper skrev:
> Hi David,

Hi Bernd,

Thanks for testing, but please post these issues to the list instead of
privately to me, then more people could help analyzing and resolving
them. I took the liberty of cc:ing in the list on this one, I hope you
don't mind.

> not tested enough to be absolutely sure, but the jOrgan group is just researching a controller issue - CC91 (reverb) *seems* not to work in FS 1.1.2.
> Perhaps you could already help us, with providing a correct MIDI message sequence how to activate this controller in FS? Actually we're using 176 91 [0 - 127].

Yes, the midi bytes seem correct to me. I have a working reverb
controller here - to test, I try "rev_preset 3" and a single note here,
and while it is sounding, I change the reverb control from 0 to 127 with
a shell command "cc 0 91 127". I then immediately notice a difference in
the sound. I've also noticed that the difference isn't *that* much,
especially if the soundfont has a lot of reverb from the start.

This seems to be according to the sf2 standard, and you should be able
to work around this by changing the default modulator (CC91 to reverb
send) and increase the "amount". The default is that the cc can change
the amount by max 0.2 (on a total scale between 0 and 1).

Can you please verify that this is working for you?
// David

reply via email to

[Prev in Thread] Current Thread [Next in Thread]