[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [fluid-dev] Drum is not working on Channel 10

From: David Henningsson
Subject: Re: [fluid-dev] Drum is not working on Channel 10
Date: Thu, 02 Dec 2010 07:38:32 +0100
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20101027 Thunderbird/3.1.6

On 2010-12-01 17:59, Element Green wrote:
On Mon, Nov 29, 2010 at 11:34 PM, yanli lei<address@hidden>  wrote:
 From this FAQ:

When we tested our drum on Channel 10 and maybe other channel is also
reserved by FluidSynth, it doesn't seem to produce any sound, would it be
possible for this channel to work?


It certainly should work.  If you described how you are using it, it
might make it easier for us to help you.  Does the SoundFont you are
loading have a preset on bank 128, program 0?  Are you using the
FluidSynth shell for this test?  If so, what do you get when you type
the "channels" command?  How are you sending note events to the
channel (via a MIDI connection or via the shell?)  If you are using
MIDI, try and send an event using the shell:
noteon 9 60 127
noteoff 9 60

That will send a note on/off event to channel 10 (note that channels
start at 0, so 9 is channel 10).  If you are still having problems,
are you sure that the other channels are working and its just an issue
with channel 10?

There also was changes in bank selection logic between 1.1.1 and 1.1.2, you might want to try a later version of FluidSynth and see if that helps.

// David

reply via email to

[Prev in Thread] Current Thread [Next in Thread]