[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [fluid-dev] ALSA Raw connection (Re: Reading input from a MIDI devic

From: Vesa Paatero
Subject: Re: [fluid-dev] ALSA Raw connection (Re: Reading input from a MIDI device)
Date: Mon, 06 Jan 2014 18:31:59 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0

Thank you for your help, Aere and David!

David wrote:
Forget about aconnect, qjackctl etc. If all you want is FluidSynth
reading input directly from the keyboard, just specify to use the ALSA
raw midi driver type, and the device to read from. And the way to do
that on the command line is what I said earlier: add " -m alsa_raw -o
midi.alsa.device=hw:<card name>", where <card name> is replaced with
your card name.

I finally got it working; last time I thought that "-o midi.alsa.device"
specifies the output sound card but after reading your instruction
carefully I found that the MIDI keyboard is also shown as a card in
/proc/asound .


reply via email to

[Prev in Thread] Current Thread [Next in Thread]