[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [fluid-dev] Pitchbend maximum

From: Bill Peterson
Subject: Re: [fluid-dev] Pitchbend maximum
Date: Fri, 4 Feb 2022 00:55:24 -0600

You can do it by using control change messages to set the Registered Parameter for pitch bend range, as described in Tom's comment on this discussion. For example, if you want to set MIDI channel 1 to have a pitch bend range of 12 semitones, send the following control changes:

cc 1 100 0 # registered parameter number MSB = 0
cc 1 101 0 # registered parameter number LSB = 0 --> pitch bend
cc 1 6 12  # pitch bend range MSB
cc 1 38 0  # pitch bend range LSB

On Thu, Feb 3, 2022 at 5:39 PM Ben Gonzales via fluid-dev <fluid-dev@nongnu.org> wrote:
Hi All.

Is there a setting for adjusting the number of semitones that maximum
pitchbend delivers? Or is it fixed?


fluid-dev mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]