freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F


From: David Ulbricht
Subject: Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F
Date: Mon, 11 Jul 2011 23:30:17 +0200

Hello Al,

thank you for your fast response but unfortunately this beta shows the same 
message like version 1.0.5. Do I have to configure something special after 
compiling?

$ ipmi-sensors -V
ipmi-sensors - 1.0.6.beta0
Copyright (C) 2003-2010 FreeIPMI Core Team
This program is free software; you may redistribute it under the terms of
the GNU General Public License.  This program has absolutely no warranty.


$ ipmi-sensors --ignore-unrecognized-events
ID   | Name          | Type              | Reading    | Units | Event
4    | System Temp   | Temperature       | 58.00      | C     | 'OK'
71   | CPU Temp      | OEM Reserved      | N/A        | N/A   | 'OEM Event = 
0000h'
138  | FAN 1         | Fan               | 1325.00    | RPM   | 'OK'
205  | FAN 2         | Fan               | N/A        | RPM   | N/A
272  | FAN 3         | Fan               | 1140.00    | RPM   | 'OK'
339  | FAN 4         | Fan               | 1140.00    | RPM   | 'OK'
406  | FAN 5         | Fan               | 1510.00    | RPM   | 'OK'
473  | CPU Vcore     | Voltage           | 0.90       | V     | 'OK'
540  | +3.3VCC       | Voltage           | 3.26       | V     | 'OK'
607  | +12 V         | Voltage           | 12.14      | V     | 'OK'
674  | CPU DIMM      | Voltage           | 1.53       | V     | 'OK'
741  | +5 V          | Voltage           | 5.09       | V     | 'OK'
808  | -12 V         | Voltage           | -12.48     | V     | 'OK'
875  | VBAT          | Voltage           | 3.14       | V     | 'OK'
942  | +3.3VSB       | Voltage           | 3.25       | V     | 'OK'
1009 | AVCC          | Voltage           | 3.26       | V     | 'OK'
1076 | Chassis Intru | Physical Security | N/A        | N/A   | 'OK'
1143 | PS Status     | Power Supply      | N/A        | N/A   | 'Presence 
detected'

David


Am 11.07.2011 um 23:06 schrieb Albert Chu:

> Hi David,
> 
> I have a beta here, can you please LMK if it works for you.
> 
> http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.6.beta0.tar.gz
> 
> Thanks,
> 
> Al
> 
> On Mon, 2011-07-11 at 10:59 -0700, Al Chu wrote:
>> Hi David,
>> 
>> It seems to be like all the other Supermicro CPU OEM sensors, so I can
>> just add the interpretation support in for you.  I'll get a beta tar.gz
>> to you to try.
>> 
>> BTW,
>> 
>>> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A
>> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
>> Event = 4000h'
>> 
>> You can cleanup this messy output w/ the --ignore-unrecognized-events option.
>> 
>> (I reported this issue to Supermicro awhile back).
>> 
>> Al 
>> 
>> On Mon, 2011-07-11 at 01:45 -0700, vitamin.b wrote:
>>> Hello,
>>> 
>>> i need some help on reading the cpu sensor from this hardware:
>>> Mainboard: Supermicro X8SIL-F Rev. 1.02
>>> CPU: Intel Xeon L3406 
>>> 
>>> 
>>> uname -a
>>> bmc-info
>>> ipmi-sensors -V
>>> ipmi-sensors --flush-cache
>>> ipmi-sensors --interpret-oem-data --output-sensor-state
>>> ipmi-sensors --interpret-oem-data --output-sensor-state 
>>> --ignore-not-available-sensors
>>> ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
>>> 
>>> 
>>> $ uname -a
>>> Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64 
>>> GNU/Linux
>>> 
>>> 
>>> $ bmc-info
>>> Device ID             : 32
>>> Device Revision       : 1
>>> Device SDRs           : unsupported
>>> Firmware Revision     : 2.50
>>> Device Available      : yes (normal operation)
>>> IPMI Version          : 2.0
>>> Sensor Device         : supported
>>> SDR Repository Device : supported
>>> SEL Device            : supported
>>> FRU Inventory Device  : supported
>>> IPMB Event Receiver   : supported
>>> IPMB Event Generator  : supported
>>> Bridge                : unsupported
>>> Chassis Device        : supported
>>> Manufacturer ID       : Super Micro Computer Inc. (47488)
>>> Product ID            : 1541
>>> 
>>> GUID : 00000000-0000-0000-0000-000000000000
>>> 
>>> Channel Information
>>> 
>>> Channel Number       : 0
>>> Medium Type          : IPMB (I2C)
>>> Protocol Type        : IPMB-1.0
>>> Active Session Count : 0
>>> Session Support      : session-less
>>> Vendor ID            : Intelligent Platform Management Interface forum 
>>> (7154)
>>> 
>>> Channel Number       : 1
>>> Medium Type          : 802.3 LAN
>>> Protocol Type        : IPMB-1.0
>>> Active Session Count : 0
>>> Session Support      : multi-session
>>> Vendor ID            : Intelligent Platform Management Interface forum 
>>> (7154)
>>> 
>>> Channel Number       : 3
>>> Medium Type          : Asynch. Serial/Modem (RS-232)
>>> Protocol Type        : IPMB-1.0
>>> Active Session Count : 0
>>> Session Support      : single-session
>>> Vendor ID            : Intelligent Platform Management Interface forum 
>>> (7154)
>>> 
>>> Channel Number       : 5
>>> Medium Type          : IPMB (I2C)
>>> Protocol Type        : IPMB-1.0
>>> Active Session Count : 0
>>> Session Support      : session-less
>>> Vendor ID            : Intelligent Platform Management Interface forum 
>>> (7154)
>>> 
>>>     
>>> $ ipmi-sensors -V
>>> ipmi-sensors - 1.0.5
>>> Copyright (C) 2003-2010 FreeIPMI Core Team
>>> This program is free software; you may redistribute it under the terms of
>>> the GNU General Public License.  This program has absolutely no warranty.
>>> 
>>> 
>>> $ ipmi-sensors --flush-cache
>>> Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
>>> 
>>> 
>>> $ ipmi-sensors --interpret-oem-data --output-sensor-state 
>>> Caching SDR repository information: 
>>> /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
>>> Caching SDR record 25 of 25 (current record ID 1612)
>>> ID   | Name          | Type              | State    | Reading    | Units | 
>>> Event
>>> 4    | System Temp   | Temperature       | Nominal  | 55.00      | C     | 
>>> 'OK'
>>> 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A   | 
>>> 'OEM Event = 0000h'
>>> 138  | FAN 1         | Fan               | Nominal  | 1325.00    | RPM   | 
>>> 'OK'
>>> 205  | FAN 2         | Fan               | N/A      | N/A        | RPM   | 
>>> N/A
>>> 272  | FAN 3         | Fan               | Nominal  | 1140.00    | RPM   | 
>>> 'OK'
>>> 339  | FAN 4         | Fan               | Nominal  | 1140.00    | RPM   | 
>>> 'OK'
>>> 406  | FAN 5         | Fan               | Nominal  | 1325.00    | RPM   | 
>>> 'OK'
>>> 473  | CPU Vcore     | Voltage           | Nominal  | 0.90       | V     | 
>>> 'OK'
>>> 540  | +3.3VCC       | Voltage           | Nominal  | 3.26       | V     | 
>>> 'OK'
>>> 607  | +12 V         | Voltage           | Nominal  | 12.14      | V     | 
>>> 'OK'
>>> 674  | CPU DIMM      | Voltage           | Nominal  | 1.52       | V     | 
>>> 'OK'
>>> 741  | +5 V          | Voltage           | Nominal  | 5.09       | V     | 
>>> 'OK'
>>> 808  | -12 V         | Voltage           | Nominal  | -12.48     | V     | 
>>> 'OK'
>>> 875  | VBAT          | Voltage           | Nominal  | 3.14       | V     | 
>>> 'OK'
>>> 942  | +3.3VSB       | Voltage           | Nominal  | 3.25       | V     | 
>>> 'OK'
>>> 1009 | AVCC          | Voltage           | Nominal  | 3.26       | V     | 
>>> 'OK'
>>> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A   | 
>>> 'OK'
>>> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A   | 
>>> 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 
>>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 
>>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized 
>>> Event = 4000h'
>>> 
>>> 
>>> $ ipmi-sensors --interpret-oem-data --output-sensor-state 
>>> --ignore-not-available-sensors
>>> ID   | Name          | Type              | State    | Reading    | Units | 
>>> Event
>>> 4    | System Temp   | Temperature       | Nominal  | 55.00      | C     | 
>>> 'OK'
>>> 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A   | 
>>> 'OEM Event = 0000h'
>>> 138  | FAN 1         | Fan               | Nominal  | 1325.00    | RPM   | 
>>> 'OK'
>>> 272  | FAN 3         | Fan               | Nominal  | 1140.00    | RPM   | 
>>> 'OK'
>>> 339  | FAN 4         | Fan               | Nominal  | 1140.00    | RPM   | 
>>> 'OK'
>>> 406  | FAN 5         | Fan               | Nominal  | 1510.00    | RPM   | 
>>> 'OK'
>>> 473  | CPU Vcore     | Voltage           | Nominal  | 0.90       | V     | 
>>> 'OK'
>>> 540  | +3.3VCC       | Voltage           | Nominal  | 3.26       | V     | 
>>> 'OK'
>>> 607  | +12 V         | Voltage           | Nominal  | 12.14      | V     | 
>>> 'OK'
>>> 674  | CPU DIMM      | Voltage           | Nominal  | 1.53       | V     | 
>>> 'OK'
>>> 741  | +5 V          | Voltage           | Nominal  | 5.09       | V     | 
>>> 'OK'
>>> 808  | -12 V         | Voltage           | Nominal  | -12.48     | V     | 
>>> 'OK'
>>> 875  | VBAT          | Voltage           | Nominal  | 3.14       | V     | 
>>> 'OK'
>>> 942  | +3.3VSB       | Voltage           | Nominal  | 3.25       | V     | 
>>> 'OK'
>>> 1009 | AVCC          | Voltage           | Nominal  | 3.26       | V     | 
>>> 'OK'
>>> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A   | 
>>> 'OK'
>>> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A   | 
>>> 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 
>>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 
>>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized 
>>> Event = 4000h'
>>> 
>>> 
>>> $ ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
>>> Record ID: 71
>>> ID String: CPU Temp
>>> Sensor Type: OEM Reserved (C0h)
>>> Sensor Number: 18
>>> IPMB Slave Address: 10h
>>> Sensor Owner ID: 20h
>>> Sensor Owner LUN: 0h
>>> Channel Number: 0h
>>> Entity ID: processor (3)
>>> Entity Instance: 1
>>> Entity Instance Type: Physical Entity
>>> Event/Reading Type Code: 70h
>>> Sensor State: N/A
>>> Sensor Event: 'OEM Event = 0000h'
>>> 
>>> 
>>> best regards
>>> David
>>> 
>>> 
>>> _______________________________________________
>>> Freeipmi-devel mailing list
>>> address@hidden
>>> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> -- 
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
> 
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]