[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RE: [Freeipmi-users] Questions on x86_64, RPMs, ...
From: |
Albert Chu |
Subject: |
Re: RE: [Freeipmi-users] Questions on x86_64, RPMs, ... |
Date: |
Sun, 27 Feb 2005 08:18:55 -0800 |
I'm assuming you're using the up to date .tar.gz I sent Richard?
/usr/include/libguile/strop.h defines scm_string_split on my system. It
seems you're using a very old libguile.
Al
--
Albert Chu
address@hidden
Lawrence Livermore National Laboratory
----- Original Message -----
From: "Ben-Shimon, Tamir" <address@hidden>
Date: Sunday, February 27, 2005 0:42 am
Subject: RE: [Freeipmi-users] Questions on x86_64, RPMs, ...
> Got this when compiling it:
>
> gcc -Wall -I./../../libfreeipmi/src -DFREEIPMI_BUILD -D_GNU_SOURCE
> -DPATH_CFG=\"/opt/etc\" -DDATADIR=\"/opt/share\" -I/usr/include -g -O2
> -o .libs/fish fish.o xmalloc.o fi-utils.o interpreter.o extension.o
> scm-procedures.o guile-wrapper.o ipmi-wrapper.o fi-commands.o
> bmc-conf2.o ../../libfreeipmi/src/.libs/libfreeipmi.so -L/usr/lib
> -lguile -L/usr/src/bs/BUILD/guile-1.3.4/libguile
> -L/usr/src/bs/BUILD/guile-1.3.4/libguile/.libs -ldl -lm -lreadline
> -lncurses -Wl,--rpath -Wl,/opt/lib
> scm-procedures.o: In function `scm2sdr_oem_record':
> /tmp/freeipmi-0.2.0/fish/src/scm-procedures.c:2770: undefined
> referenceto `scm_string_split'
> collect2: ld returned 1 exit status
> make[3]: *** [fish] Error 1
> make[3]: Leaving directory `/tmp/freeipmi-0.2.0/fish/src'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/tmp/freeipmi-0.2.0/fish'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/tmp/freeipmi-0.2.0'
> make: *** [all] Error 2
>
> -----Original Message-----
> From: Albert Chu [mailto:address@hidden
> Sent: Friday, February 25, 2005 4:48 AM
> To: Richard Lefebvre
> Cc: address@hidden
> Subject: Re: [Freeipmi-users] Questions on x86_64, RPMs, ...
>
> Hey Richard,
>
> Please try this more up to date tar.gz. The 'sensors' tool
> conflict w/
> lm_sensors is currently being worked on. I think we were going to
> rename it ipmi-sensors.
>
> Al
>
> --
> Albert Chu
> address@hidden
> Lawrence Livermore National Laboratory
>
> ----- Original Message -----
> From: Richard Lefebvre <address@hidden>
> Date: Thursday, February 24, 2005 3:54 pm
> Subject: [Freeipmi-users] Questions on x86_64, RPMs, ...
>
> > Anyone got the x86_64 running correctly. In running RHEL4-x86_64
> on
> > a
> > TYAN thunder i7520 with dual Xeon EM64T. I have installed the
> > patches
> > mention in the previous x86_64 thread (note I got the same
> > rejection
> > error on the patch). I eventually got it compile, there is a bit
> > of issues with /usr/lib and /usr/lib64. But when I tried to run
> > bmc-info, it just stays there doing nothing.
> >
> > I also tried the i386 RPM, but it does the same thing. Speaking
> of
> > RPMs,
> > There is a few problems with those. There is a conflict with
> > another
> > package called lm_sensors, someone might look into that. Also the
> > src.rpm is a bit off. The tar inside is not the same
> > freeipmi-0.1.3.tar.gz . Which one is the proper tar.gz file.
> >
> > Richard
> >
> >
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/freeipmi-users
> >
>
- [Freeipmi-users] Questions on x86_64, RPMs, ..., Richard Lefebvre, 2005/02/24
- Re: [Freeipmi-users] Questions on x86_64, RPMs, ..., Albert Chu, 2005/02/24
- RE: [Freeipmi-users] Questions on x86_64, RPMs, ..., Ben-Shimon, Tamir, 2005/02/27
- RE: [Freeipmi-users] Questions on x86_64, RPMs, ..., Ben-Shimon, Tamir, 2005/02/27
- Re: RE: [Freeipmi-users] Questions on x86_64, RPMs, ...,
Albert Chu <=