[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320SP2
From: |
Schäfer Raumgestaltung |
Subject: |
[Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320SP2 |
Date: |
Sat, 25 Aug 2007 07:43:21 +0200 |
Big trouble in little China....
Board: Intel SE7320Sp2
mBMC PC87431M
Distro: Opensuse 10.2 (Kernel 2.6.18)
Arch: x86_64
Done so far:
built Freeipmi 0.4.3 RPM from Sources (thanks to Opensuse Buildservice)
Trying to read Sensor-Values like....
>ipmi-sensors -D ssif --driver-device /dev/i2c-0 --driver-address 0x42
Fetching SDR repository Information ...done
FAILED: Retrieval of SDR record 0x0ord ID 0)
SDR Cache creation failed: internal_error
..... or somtimes (until flushing Cache with -f)
SDR Cache creation failed: ipmi_communication_error
any hints what's going wrong ??
attached: some "Diagnostic"
>lsmod |grep i2c
i2c_dev 28168 0
i2c_i801 25364 0
i2c_core 41472 2 i2c_dev,i2c_i801
=======================================================================================================
>i2cdetect -l 0
i2c-0 smbus SMBus I801 adapter at 0400 Non-I2C SMBus
adapter
=======================================================================================================
>ipmi-locate
Probing KCS device using DMIDECODE... FAILED
Probing SMIC device using DMIDECODE... FAILED
Probing BT device using DMIDECODE... FAILED
Probing SSIF device using DMIDECODE... done
IPMI Version: 1.5
IPMI locate driver: DMIDECODE
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 42
Register space: 1
Probing KCS device using SMBIOS... FAILED
Probing SMIC device using SMBIOS... FAILED
Probing BT device using SMBIOS... FAILED
Probing SSIF device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 84
Register space: 1
Probing KCS device using ACPI... FAILED
Probing SMIC device using ACPI... FAILED
Probing BT device using ACPI... FAILED
Probing SSIF device using ACPI... FAILED
Probing KCS device using PCI... FAILED
Probing SMIC device using PCI... FAILED
Probing BT device using PCI... FAILED
Probing SSIF device using PCI... FAILED
KCS device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: KCS
BMC driver device:
BMC I/O base address: CA2
Register space: 1
SMIC device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SMIC
BMC driver device:
BMC I/O base address: CA9
Register space: 1
BT device default values:
SSIF device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 42
Register space: 1
=======================================================================================================
>ipmi-raw -D ssif --driver-device /dev/i2c-0 0 6 1
rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43
=======================================================================================================
>bmc-info -D ssif --driver-device /dev/i2c-0 --driver-address 0x42
Device ID: 20
Device Revision: 1
[SDR Support]
Firmware Revision: 2.64
[Device Available (normal operation)]
IPMI Version: 1.5
Additional Device Support:
[Sensor Device]
[SDR Repository Device]
[SEL Device]
[FRU Inventory Device]
[IPMB Event Receiver]
[Chassis Device]
Manufacturer ID: 322h
Product ID: 4311h
Aux Firmware Revision Info: 0h
Channel Information:
Channel No: 1
Medium Type: 802.3 LAN
Protocol Type: IPMB-1.0
Channel No: 2
Medium Type: System Interface (KCS, SMIC, or BT)
Protocol Type: IPMI-SMBus
=======================================================================================================
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Ulrich Schäfer
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
- [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320SP2,
Schäfer Raumgestaltung <=