Re: [Freeipmi-users] Problem with ipmi-sensors version 0.6.6

[Al Chu]

Hey Rohit,

Could you run ipmi-sensors w/ --debug and send me the output?

> ipmi_cmd_get_sensor_reading_discrete: bad completion code: request
> data/parameter invalid

I need to find out why your motherboard is reporting a bad error code to
ipmi-sensors (and is not one of the "ok" error codes currently handled).

Thanks,

Al

On Tue, 2008-09-09 at 16:54 +0530, Rohit Jog wrote:
> Hello people,Here are the output of various ipmi commands ..
> ---------------------------------------------------------------------------------------------------------------------------------------------------
> address@hidden ~]# ipmi-sensors
> 2: ambienttemp (Temperature): 21.60 C (NA/40.20): [OK]
> 3: bulk.v12-0-s0 (Voltage): 12.18 V (10.20/13.80): [OK]
> 4: bulk.v12-1-s0 (Voltage): 12.18 V (10.20/13.80): [OK]
> 5: bulk.v1_8-s0 (Voltage): 1.80 V (1.68/2.04): [OK]
> 6: bulk.v1_8-s5 (Voltage): 1.80 V (1.68/2.04): [OK]
> 7: bulk.v2_5-s0 (Voltage): 2.52 V (2.28/2.76): [OK]
> 8: bulk.v2_5-s5 (Voltage): 2.52 V (2.28/2.76): [OK]
> 9: bulk.v3_3-s0 (Voltage): 3.36 V (3.00/3.60): [OK]
> 10: bulk.v3_3-s3 (Voltage): 3.36 V (3.00/3.60): [OK]
> 11: bulk.v3_3-s5 (Voltage): 3.36 V (3.00/3.60): [OK]
> 12: bulk.v5-s0 (Voltage): 5.04 V (4.50/5.52): [OK]
> 13: bulk.v5-s5 (Voltage): 5.04 V (4.50/5.52): [OK]
> 14: cpu0.dietemp (Temperature): 37.20 C (NA/73.20): [OK]
> 15: cpu0.memtemp (Temperature): 29.40 C (NA/55.20): [OK]
> 16: cpu0.temp (Temperature): 28.80 C (NA/60.00): [OK]
> 17: cpu0.v2_5-s0 (Voltage): 2.52 V (2.28/2.76): [OK]
> 18: cpu0.v2_5-s3 (Voltage): 2.52 V (2.28/2.76): [OK]
> 19: cpu0.vcore-s0 (Voltage): 1.56 V (0.72/1.68): [OK]
> 20: cpu0.vldt1 (Voltage): 1.20 V (1.08/1.32): [OK]
> 21: cpu0.vldt2 (Voltage): 1.20 V (1.08/1.32): [OK]
> 22: cpu0.vtt-s3 (Voltage): 1.32 V (1.08/1.32): [OK]
> 23: cpu1.dietemp (Temperature): 36.00 C (NA/73.20): [OK]
> 24: cpu1.memtemp (Temperature): 27.00 C (NA/60.00): [OK]
> 25: cpu1.temp (Temperature): 27.00 C (NA/60.00): [OK]
> 26: cpu1.v2_5-s3 (Voltage): 2.52 V (2.28/2.76): [OK]
> 27: cpu1.vcore-s0 (Voltage): 1.56 V (0.72/1.68): [OK]
> 28: cpu1.vtt-s3 (Voltage): 1.20 V (1.08/1.32): [OK]
> 29: fan1.tach (Fan): 14760.00 RPM (1980.00/NA): [OK]
> 30: fan2.tach (Fan): 14700.00 RPM (1980.00/NA): [OK]
> 31: fan3.tach (Fan): 15060.00 RPM (1980.00/NA): [OK]
> 32: fan4.tach (Fan): 14820.00 RPM (1980.00/NA): [OK]
> 33: fan5.tach (Fan): 15300.00 RPM (1980.00/NA): [OK]
> 34: fan6.tach (Fan): 15300.00 RPM (1980.00/NA): [OK]
> 35: g.vldt1 (Voltage): 1.20 V (1.08/1.32): [OK]
> 36: gbeth.temp (Temperature): 30.00 C (NA/60.00): [OK]
> 37: golem.temp (Temperature): 31.20 C (NA/60.00): [OK]
> 38: hddbp.temp (Temperature): 24.00 C (NA/60.00): [OK]
> 39: sp.temp (Temperature): 31.80 C (NA/60.00): [OK]
> 40: thor.temp (Temperature): 30.00 C (NA/60.00): [OK]
> ipmi_cmd_get_sensor_reading_discrete: bad completion code: request
> data/parameter invalid
> address@hidden ~]#
> ---------------------------------------------------------------------------------------------------------------------------------------------------
> 
> address@hidden ~]# ipmi-locate
> Probing KCS device using DMIDECODE... done
> IPMI Version: 1.5
> IPMI locate driver: DMIDECODE
> IPMI interface: KCS
> BMC driver device:
> BMC I/O base address: 0xA2
> Register spacing: 1
> 
> Probing SMIC device using DMIDECODE... FAILED
> Probing BT device using DMIDECODE... FAILED
> Probing SSIF device using DMIDECODE... FAILED
> Probing KCS device using SMBIOS... done
> IPMI Version: 1.5
> IPMI locate driver: SMBIOS
> IPMI interface: KCS
> BMC driver device:
> BMC I/O base address: 0xA2
> Register spacing: 1
> 
> Probing SMIC device using SMBIOS... FAILED
> Probing BT device using SMBIOS... FAILED
> Probing SSIF device using SMBIOS... FAILED
> Probing KCS device using ACPI... FAILED
> Probing SMIC device using ACPI... FAILED
> Probing BT device using ACPI... FAILED
> Probing SSIF device using ACPI... FAILED
> Probing KCS device using PCI... FAILED
> Probing SMIC device using PCI... FAILED
> Probing BT device using PCI... FAILED
> Probing SSIF device using PCI... FAILED
> KCS device default values:
> IPMI Version: 1.5
> IPMI locate driver: DEFAULT
> IPMI interface: KCS
> BMC driver device:
> BMC I/O base address: 0xCA2
> Register spacing: 1
> 
> SMIC device default values:
> IPMI Version: 1.5
> IPMI locate driver: DEFAULT
> IPMI interface: SMIC
> BMC driver device:
> BMC I/O base address: 0xCA9
> Register spacing: 1
> 
> BT device default values:
> SSIF device default values:
> IPMI Version: 1.5
> IPMI locate driver: DEFAULT
> IPMI interface: SSIF
> BMC driver device: /dev/i2c-0
> BMC SMBUS slave address: 0x42
> Register spacing: 1
> ---------------------------------------------------------------------------------------------------------------------------------------------------
> 
> address@hidden ~]# ipmimonitoring
> ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error
> address@hidden ~]#
> 
> ----------------------------------------------------------------------------------------------------------------------------------------------------
> 
> Here is the output of lspci
> address@hidden ~]# lspci
> 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
> 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
> 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
> 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
> 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
> 12)
> 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
> 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
> 12)
> 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
> 01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
> 01:05.0 VGA compatible controller: Trident Microsystems Blade 3D PCI/AGP
> (rev 3a)
> 02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
> Ethernet (rev 02)
> 02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
> Ethernet (rev 02)
> 02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
> Fusion-MPT Dual Ultra320 SCSI (rev 08)
> 02:05.0 Fibre Channel: QLogic Corp. QLA2300 64-bit Fibre Channel Adapter
> (rev 01)
> 03:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 02)
> 04:04.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
> Controller (rev 01)
> 04:04.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
> Controller (rev 01)
> 04:06.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
> Controller (rev 01)
> 04:06.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
> Controller (rev 01)
> Machine is a SUN machine, and its model is V20Z.
> Sorry, I initially thought that the machine is Dell Machine, but is seems
> that machine from SUN.
> 
> 
-- 
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory