[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Gcl-devel] GCL for iMac
From: |
Camm Maguire |
Subject: |
Re: [Gcl-devel] GCL for iMac |
Date: |
02 Oct 2003 16:08:09 -0400 |
User-agent: |
Gnus/5.09 (Gnus v5.9.0) Emacs/21.2 |
Hi Tim!
First I'm told you need to configure with
./configure --enable-debug --enable-machine=powerpc-macosx
--disable-statsysbfd --enable-custreloc
I haven't yet merged in a few of Aurelian's proposed patches, hope too
soon -- here is his last email on the subject. Please let me know how
it goes. I'll add configure defaults for this platform if it works
for you. Over the long run, we'd rather link with statsysbfd.
=============================================================================
Hi,
You might want to try the following steps to build GCL on Mac OS
X. Note that this port is premature and that I haven't tested it with
Axiom. Stratified garbage collection is not yet fully supported (need
to retrieve the page fault address).
Please, keep me posted on how this goes !
Aurelien
---
1- Get the latest CVS release (2.7.0).
2- Assuming bash, configure your shell as follows :
ulimit -n 512
if [ -z "$LIBRARY_PATH" ]; then
export LIBRARY_PATH=/sw/lib
else
export LIBRARY_PATH=/sw/lib:$LIBRARY_PATH
fi
export LIBRARY_PATH
if [ -z "$C_INCLUDE_PATH" ]; then
C_INCLUDE_PATH=/sw/include
else
C_INCLUDE_PATH=/sw/include:$C_INCLUDE_PATH
fi
export C_INCLUDE_PATH
export CPPFLAGS="-no-cpp-precomp"
The /sw tricks are used to enable readline support (/sw is Fink's root).
3- Apply the following patches :
--- o/main.c 4 Sep 2003 03:09:39 -0000 1.30
+++ o/main.c 4 Sep 2003 21:52:28 -0000
@@ -111,6 +111,11 @@
struct rlimit rl;
#endif
+#if defined(DARWIN)
+ extern void init_darwin_zone_compat ();
+ init_darwin_zone_compat ();
+#endif
+
#ifdef RECREATE_HEAP
RECREATE_HEAP
#endif
--- o/unixfasl.c 15 Feb 2003 00:38:28 -0000 1.4
+++ o/unixfasl.c 4 Sep 2003 21:53:16 -0000
@@ -282,7 +282,7 @@
static int
faslink(object faslfile, object ldargstring)
{
-#if defined(__linux__) && defined(__ELF__)
+#if (defined(__linux__) && defined(__ELF__)) || defined(DARWIN)
FEerror("faslink() not supported for ELF yet",0);
return 0;
#else
--- unixport/makefile 4 Sep 2003 03:09:39 -0000 1.45
+++ unixport/makefile 4 Sep 2003 21:54:00 -0000
@@ -17,6 +17,7 @@
libgclp.a: $(ODIR)/gcllib.a
cp $< $@
+ ranlib $@
gmpfiles: $(shell find ../$(GMPDIR) -name "*.o" |grep -v '\.lib')
rm -rf gmp
@@ -80,15 +81,15 @@
init_%.lsp: init_%.lsp.tmp
cat $< | sed \
- -e "s,@LI-VERS@,(`cat ../majvers`.`cat ../minvers`)
`date`,1" \
- -e "s,@LI-MINVERS@,`cat ../minvers`,1" \
- -e "s,@LI-MAJVERS@,`cat ../majvers`,1" \
- -e "s,@LI-CC@,\"$(CC) -c $(FINAL_CFLAGS)\",1" \
- -e "s,@LI-LD@,\"$(CC) -o \",1" \
- -e "s,@LI-LD-LIBS@,\"$(LD_LIBS_PRE) -l$*
$(LD_LIBS_POST)\",1" \
- -e "s,@LI-OPT-THREE@,\"$(O3FLAGS)\",1" \
- -e "s,@LI-OPT-TWO@,\"$(O2FLAGS)\",1" \
- -e "s,@LI-INIT-LSP@,\"address@hidden",1" >$@
+ -e "s,@LI-VERS@,(`cat ../majvers`.`cat ../minvers`)
`date`," \
+ -e "s,@LI-MINVERS@,`cat ../minvers`," \
+ -e "s,@LI-MAJVERS@,`cat ../majvers`," \
+ -e "s,@LI-CC@,\"$(CC) -c $(FINAL_CFLAGS)\"," \
+ -e "s,@LI-LD@,\"$(CC) -o \"," \
+ -e "s,@LI-LD-LIBS@,\"$(LD_LIBS_PRE) -l$*
$(LD_LIBS_POST)\"," \
+ -e "s,@LI-OPT-THREE@,\"$(O3FLAGS)\"," \
+ -e "s,@LI-OPT-TWO@,\"$(O2FLAGS)\"," \
+ -e "s,@LI-INIT-LSP@,\"address@hidden"," >$@
saved_%:raw_% $(RSYM) init_%.lsp \
$(CMPDIR)/cmpmain.lsp \
@@ -108,21 +109,21 @@
libgcl.a: $(FIRST_FILE) $(OBJS) sys_gcl.o $(LAST_FILE) gmpfiles
bfdfiles
rm -rf $@
- ar rs $@ $(filter %.o,$^) $(shell find gmp bfd -name "*.o")
+ libtool -static -o $@ $(filter %.o,$^) $(shell find gmp bfd
-name "*.o")
libxgcl.a: libgcl.a
ln -snf $< $@
libansi_gcl.a: $(FIRST_FILE) $(OBJS) $(ANSIOBJS) sys_ansi_gcl.o
$(LAST_FILE) gmpfiles bfdfiles
rm -rf $@
- ar rs $@ $(filter %.o,$^) $(shell find gmp bfd -name "*.o")
+ libtool -static -o $@ $(filter %.o,$^) $(shell find gmp bfd
-name "*.o")
libpcl_gcl.a: $(FIRST_FILE) $(OBJS) $(PCLOBJS) sys_pcl_gcl.o
$(LAST_FILE) gmpfiles bfdfiles
rm -rf $@
- ar rs $@ $(filter %.o,$^) $(shell find gmp bfd -name "*.o")
+ libtool -static -o $@ $(filter %.o,$^) $(shell find gmp bfd
-name "*.o")
raw_%: lib%.a libgclp.a $(SYSTEM_OBJS) $(EXTRAS)
- $(CC) -o raw_$*$(EXE) $(filter %.o,$^) \
+ $(CC) -Wl,-headerpad,1f000 -o raw_$*$(EXE) $(filter %.o,$^) \
-L. $(EXTRA_LD_LIBS) $(LD_LIBS_PRE) -l$* $(LD_LIBS_POST)
clean:
4- Configure with :
./configure --enable-debug --enable-machine=powerpc-macosx
--disable-statsysbfd --enable-custreloc
_______________________________________________
Gcl-devel mailing list
address@hidden
http://mail.gnu.org/mailman/listinfo/gcl-devel
=============================================================================
Tim Daly <address@hidden> writes:
> Ok, I did a co -r Version_2_6_1
> What machine is the iMac OS X supposed to be?
> The configure script didn't figure it out.
>
> Tim Daly
> address@hidden
> address@hidden
>
>
> _______________________________________________
> Gcl-devel mailing list
> address@hidden
> http://mail.gnu.org/mailman/listinfo/gcl-devel
>
>
>
--
Camm Maguire address@hidden
==========================================================================
"The earth is but one country, and mankind its citizens." -- Baha'u'llah