[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Getfem-users] help: installation of the MATLAB interface (MATLAB 20
Re: [Getfem-users] help: installation of the MATLAB interface (MATLAB 2009b) on ubuntu 10.10 64bit
Tue, 28 Dec 2010 13:40:12 -0600
Thank you very much for the response and suggestion. I have tried the
tips, but the same error still happened.
I will definitely let you know once I solved the problem.
On Tue, Dec 28, 2010 at 8:26 AM, Mirko Windhoff
> Dear Zaiwen,
> I don't have Matlab 2009b, so I'm sorry that I cannot test it or
> reproduce your problem. For me GetFEM works with Ubuntu 10.10 64bit
> and Matlab 2010a. So here I can give only some general tips:
> Try make clean or recheckout the sources. If you have libmumps
> installed on your system, add --enable-mumps=no to the configure
> string. Make sure, that the correct compiler version is used in the
> Has anybody better ideas?
> If you found a solution I would appreciate if you would add it to the
> build instructions ;)
> 2010/12/27 Zaiwen Wen <address@hidden>:
>> Dear getfem users:
>> I can install and run getfem successfully in MATLAB 2009b on Ubuntu
>> 10.10 32bit by following the steps of Mirko Windhoff. However, I had
>> trouble in MATLAB 2009b on Ubuntu 10.10 64bit. There was no error
>> during "make". But the MATLAB interface did not work:
>> address@hidden make check
>> running checks...
>> export MATLAB_ROOT=/home/wenzw/software/matlab
>> == check_integ [integration methods] : FAILURE
>> == check_mesh_fem [mesh_fem manipulations] : FAILURE
>> == check_asm [assembly routines] : FAILURE
>> == check_solve : FAILURE
>> == check_oo [pseudo object oriented interface] : FAILURE
>> == check_slices [mesh slicing functions] : FAILURE
>> == check_spmat [sparse matrix functions] : FAILURE
>> == check_bricks [model bricks functions] : FAILURE
>> == 8/11 tests FAILED
>> FAIL: ./check_all.sh
>> 1 of 1 test failed
>> The errors in Matlab were:
>> ??? Error using ==> gfassert at 13
>> Error in ==> check_integ at 20
>> gfassert('npt==[4 2 2 2]');
>> My configurations were generated as follows:
>> ./configure --enable-matlab --disable-python --enable-superlu
>> --with-pic --enable-qhull
>> CC=gcc-4.2 CXX=g++-4.2 FC=gfortran-4.2
>> I appreciate for any suggestion and comment!
>> Thank you very much!
>> Getfem-users mailing list