[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Getfem-users] problem with and

From: Yves Renard
Subject: Re: [Getfem-users] problem with and
Date: Wed, 3 Jan 2018 19:56:27 +0100 (CET)

Dear Martin,

In fact, Superlu is the default linear solver but it is limited especially in 
3D and several test programs are only working with Mumps installed. So it is 
recommended to install Mumps.



----- Original Message -----
From: "GUITON Martin" <address@hidden>
To: address@hidden
Sent: Wednesday, January 3, 2018 5:38:36 PM
Subject: [Getfem-users] problem with and

Good evening,

Having just installed getfem with python interface, I tried to run the demo 
python files and I am facing divergence problems for the two following files : and

*         For demo_wheel_contact, the output ends with

Level 1 Warning in, line 217: SuperLU solve failed: info =7401
Singular tangent matrix: perturbation of the state vector
Singular tangent matrix: perturbation failed, aborting.
('alpha_D = ', -1.7013307862685368e-50)

*         For demo_tripod, I obtain:

Level 2 Warning in ../../src/gmm/gmm_precond_ilu.h, line 182: pivot 404 is too 
Level 2 Warning in ../../src/getfem/getfem_model_solvers.h, line 105: gmres did 
not converge!

To be noticed, the tests with make test have passed.
If you have an idea of a way to solve it, could you please let me know ?

Martin Guiton
Avant d'imprimer, pensez à l'environnement ! Please consider the environment 
before printing ! 
Ce message et toutes ses pièces jointes sont confidentiels et établis à 
l'intention exclusive de ses destinataires. Toute utilisation non conforme à sa 
destination, toute diffusion ou toute publication, totale ou partielle, est 
interdite, sauf autorisation expresse. IFP Energies nouvelles décline toute 
responsabilité au titre de ce message. This message and any attachments are 
confidential and intended solely for the addressees. Any unauthorised use or 
dissemination is prohibited. IFP Energies nouvelles should not be liable for 
this message.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]