[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Gluster-devel] afr fault recovery

From: Krishna Srinivas
Subject: Re: [Gluster-devel] afr fault recovery
Date: Mon, 6 Aug 2007 20:59:18 +0530

Can you run glusterfs in the DEBUG mode and send the logs?

glusterfs -f client.vol -L DEBUG -l /tmp/glusterfs.log /mnt/gluster

can you glusterfs in DEBUG on vs0, kill the glusterfsd on vs1 and
mail the /tmp/glusterfs.log?


On 8/6/07, Nathan Allen Stratton <address@hidden> wrote:
> On Mon, 6 Aug 2007, Krishna Srinivas wrote:
> > Hi Nathan,
> >
> > Can you confirm that you are not killing the server to which
> > the client connects?
> >
> > According to the spec, client connects to server on
> > Which server are you running here(vs0/vs1/vs2)? What is the ip address of 
> > the
> > server you are killing?
> So each server also has a client, so that is why I used loopback. So if I
> kill vs0 then server and client for vs0 are down. However clients on vs1
> and vs2 also point to each localhost are still up. So they should still be
> working, but are locked.
> -Nathan
> _______________________________________________
> Gluster-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]