Re: [Gnewsense-dev] Re: gNewSense-MIPS and SiliconMotion video driver

[Karl Goetz]

On Wed, 17 Mar 2010 12:52:10 -0400
Brett Smith <address@hidden> wrote:

> On Mon, 2010-03-08 at 23:40 -0500, Quiliro Ordóñez wrote:
> > Will this fix come to the repos soon?
> 
> I have been working on this a little bit.  The patch applies pretty
> easily to the SiliconMotion driver that's currently in the metad
> repository (you just have to change the indentation in one of the
> patch chunks).  I have a modified Debian source tree with the patch
> added that gets to the build process cleanly.

I assume that's the xserver-xorg-video-siliconmotion package.

> Unfortunately, I don't have a good compiler toolchain for the
> Yeeloong, and I've been working on that problem too but haven't had
> much luck.  Is there someone who's interested in building this?  I've
> attached the modified patch -- all you should have to do is drop it in
> debian/patches, add its filename to debian/patches/series, and
> rebuild.

Are you seeing similar errors to those pasted at the bottom? This is a
build I attempted on metad and lenny.
kk

> Alternatively, if anyone could help me build/get the compiler chain,
> that'd be cool too.  :)

../../src/smi_video.c:1877: warning: unused variable 'pScreen'
/tmp/ccBlnV2F.s: Assembler messages:
/tmp/ccBlnV2F.s:4616: Error: illegal operands `xor $f0,$f0,$f0'
/tmp/ccBlnV2F.s:4617: Error: opcode not supported on this processor: mips1 
(mips1) `ldc1 $f4,($4)'
/tmp/ccBlnV2F.s:4618: Error: unrecognized opcode `punpcklbh $f2,$f4,$f0'
/tmp/ccBlnV2F.s:4619: Error: unrecognized opcode `punpckhbh $f4,$f4,$f0'
/tmp/ccBlnV2F.s:4620: Error: opcode not supported on this processor: mips1 
(mips1) `ldc1 $f16,8($4)'
/tmp/ccBlnV2F.s:4621: Error: unrecognized opcode `punpcklbh $f14,$f16,$f0'
/tmp/ccBlnV2F.s:4622: Error: unrecognized opcode `punpckhbh $f16,$f16,$f0'
/tmp/ccBlnV2F.s:4625: Error: unrecognized opcode `punpcklbh $f8,$f8,$f12'
/tmp/ccBlnV2F.s:4626: Error: unrecognized opcode `punpcklbh $f6,$f0,$f8'
/tmp/ccBlnV2F.s:4627: Error: unrecognized opcode `punpckhbh $f8,$f0,$f8'
/tmp/ccBlnV2F.s:4630: Error: unrecognized opcode `punpcklbh $f18,$f18,$f12'
/tmp/ccBlnV2F.s:4631: Error: unrecognized opcode `punpcklbh $f10,$f0,$f18'
/tmp/ccBlnV2F.s:4632: Error: unrecognized opcode `punpckhbh $f12,$f0,$f18'
/tmp/ccBlnV2F.s:4633: Error: illegal operands `or $f2,$f2,$f6'
/tmp/ccBlnV2F.s:4634: Error: illegal operands `or $f4,$f4,$f8'
/tmp/ccBlnV2F.s:4635: Error: illegal operands `or $f14,$f14,$f10'
/tmp/ccBlnV2F.s:4636: Error: illegal operands `or $f16,$f16,$f12'
/tmp/ccBlnV2F.s:4637: Error: opcode not supported on this processor: mips1 
(mips1) `sdc1 $f2,($5)'
/tmp/ccBlnV2F.s:4638: Error: opcode not supported on this processor: mips1 
(mips1) `sdc1 $f4,8($5)'
/tmp/ccBlnV2F.s:4642: Error: opcode not supported on this processor: mips1 
(mips1) `sdc1 $f14,0x10($5)'
/tmp/ccBlnV2F.s:4643: Error: opcode not supported on this processor: mips1 
(mips1) `sdc1 $f16,0x18($5)'
/tmp/ccBlnV2F.s:4658: Error: illegal operands `xor $f0,$f0,$f0'
/tmp/ccBlnV2F.s:4659: Error: opcode not supported on this processor: mips1 
(mips1) `ldc1 $f4,($4)'
/tmp/ccBlnV2F.s:4660: Error: unrecognized opcode `punpcklbh $f2,$f4,$f0'
/tmp/ccBlnV2F.s:4661: Error: unrecognized opcode `punpckhbh $f4,$f4,$f0'
/tmp/ccBlnV2F.s:4664: Error: unrecognized opcode `punpcklbh $f8,$f8,$f12'
/tmp/ccBlnV2F.s:4665: Error: unrecognized opcode `punpcklbh $f6,$f0,$f8'
/tmp/ccBlnV2F.s:4666: Error: unrecognized opcode `punpckhbh $f8,$f0,$f8'
/tmp/ccBlnV2F.s:4667: Error: illegal operands `or $f2,$f2,$f6'
/tmp/ccBlnV2F.s:4668: Error: illegal operands `or $f4,$f4,$f8'
/tmp/ccBlnV2F.s:4669: Error: opcode not supported on this processor: mips1 
(mips1) `sdc1 $f2,($5)'
/tmp/ccBlnV2F.s:4670: Error: opcode not supported on this processor: mips1 
(mips1) `sdc1 $f4,8($5)'
make[3]: *** [smi_video.lo] Error 1
make[3]: Leaving directory 
`/root/xserver-xorg-video-siliconmotion-1.6.0/obj-mipsel-linux-gnu/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory 
`/root/xserver-xorg-video-siliconmotion-1.6.0/obj-mipsel-linux-gnu'
make[1]: *** [all] Error 2
make[1]: Leaving directory 
`/root/xserver-xorg-video-siliconmotion-1.6.0/obj-mipsel-linux-gnu'
make: *** [build-stamp] Error 2
dpkg-buildpackage: failure: debian/rules build gave error exit status 2



-- 
Karl Goetz, (Kamping_Kaiser / VK5FOSS)
Debian contributor / gNewSense Maintainer
http://www.kgoetz.id.au
No, I won't join your social networking group

signature.asc
Description: PGP signature