Re: [gNewSense-users] Re: gNewSense-users Digest, Vol 40, Issue 30

[Peter Rock]

Here's exactly what happens:

PMON> load (usb0,0)/vmlinux-2.6.31.6-libre1
Loading file: (usb0,0)/vmlinux-2.6.31.6-libre1/(elf)
(elf)
0x80200000/3555840 + 0x80564200/286128(z) + 6815 syms\
Entry address is 802063c0

PMON> initrd(usb0,0)/initrd.gz
Loading initrd image (usb0,0)/initrd.gz(bin)     #This process takes a
few minutes with a twirling backslash/frontslash on the right side of
the screen and then...

Loaded 5259509 bytes
PMON> g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8 machtype=8.9

And here I get a lot of output I can't repeat along with a Tux the
penguin logo and eventually I'm taken to the first step of the
installation process (Choose language) instead of the installed gNS on
my system. According to dir (wd0,0)/ I have a system installed as it
lists all the typical directories starting with lost+found, var,
etc... all the way through to opt.


On Wed, Jan 27, 2010 at 10:52 AM, Quiliro Ordóñez <address@hidden> wrote:
>>>>
>>>> I tried "load (usb0,0)/vmlinux-2.6.31.6-libre1" and that seemed to be fine.
>>>> Then "initrd (usb0,0)/initrd.gz" and that didn't give me an error but
>>>> I don't know if this is what I'm to do
>>>
>>> I am very very sorry. the initrd line should read:
>>>
>>> initrd (wd0,0)/initrd.gz
>>
>> Wait a minute..... The previous one was correct!
>>
>
> initrd (usb0,0)/initrd.gz
>
> is correct!
>