Le samedi 29 janvier 2011 à 17:44 +0200, matti christensen a écrit :
how did you get the system installed = what about the metad file ?
cp /usr/share/debootstrap/scripts/sid /usr/share/debootstrap/scripts/metad
( i'm not able to do nothing write now because of kids - and weather
= i'll explain later )
I understand, I should be working + take care of the kids (only 2 here!)
instead of hacking chinese boxes ;-)
boot the newintrd.gz and shift to an other virtual console to be able
to copy the kernel from your usb stick to the hd and modules from
ram filesystem to hd
Fine! Thank you for your advice!
I make another try a bit later
Quoting samy boutayeb <address@hidden>:
> Hi all,
> Just to let you know, that a revival of the Fuloong Mini seems to be
> doable (see our former posts on this list) after some progress on the
> installation front.
> As usual, the kernel was not installed by the installation procedure,
> and you need to creage a /boot/boot.cfg file.
> I was not yet so lucky to manage to achieve a complete booting of the
> box, however, the commands
> load (usb0,0)/fuloong/vmlinux-2.6.37-libre-lemote
> g console=tty no_auto_cmd root=/dev/sda1 rootdelay=8
> boots the systemn with one error message so far:
> FATAL: Could not load /lib/modules/2.6.37-libre-lemote/modules.dep: No
> such file or directory
> then, a sequence of lines, as usual, followed by the [ ok ] on the right
> until it arrives to
> gNewSense mips64 debian tty1
> debian login:
> Then, no keyboard!
> gNewSense-users mailing list