gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 8210 and IrDa


From: Jonathan Roadley-Battin
Subject: Re: 8210 and IrDa
Date: Tue, 20 Aug 2002 06:17:02 -0500

Do you have write permission to /dev/ircomm0 ?



----- Original Message -----
From: Thomas Watz <address@hidden>
Date: Tue, 20 Aug 2002 12:59:46 +0200 
To: address@hidden
Subject: Re: 8210 and IrDa


> Am Montag, 19. August 2002 12:26 schrieb Pawel Kot:
> > > It is working with a normal cable without a problem it seems and
> > > IrDA ist working on Win98, so it should work. I am running a
> > > serial dongle (Actisys IR220L+)
> > >
> > > gamma:/home/thomas# lsmod
> > > Module                  Size  Used by    Not tainted
> > > irtty                   7296   2  (autoclean)
> > > actisys                 1408   1
> > > ircomm-tty             30112   0
> > > ircomm                 13180   0  [ircomm-tty]
> > > irda                  137900   1  [irtty actisys ircomm-tty
> > > ircomm]
> >
> > Well, I use irport for the connection with gnokii.
> 
> Hello I loaded irport in addition to the other modules shown above 
> and removed ircomm-tty and ircomm.
> Then
> 
> gamma:/home/thomas# gnokii --identify
> GNOKII Version 0.4.3
> Telephone interface init failed: Command timed out. Quitting.
> 
> The 8210 shows a blinking IrDA sign when there is no connection to an 
> other device and a non-blinking sign when there is an connection. 
> During 'gnokii --identify' there is a non-blinking sign and a 
> blinking sign again when the failure message is shown.
> 
> After 'gnokii --identify'  ircomm and ircomm-tty are loaded 
> automatically again.   :-?
> 
> > > .gnokiirc (in home dir, not in /etc/)
> > > [global]
> > > port = /dev/ircomm0
> > > #port = /dev/ttyS0
> > > model = 8210
> > > initlength = default
> > > connection = irda    #serial
> > > bindir = /usr/sbin/
> >
> > It looks good.
> 
> Do I have to change something for the irport module? I left it like 
> that.
> 
> >
> > > It seems for me, that the IR is talking to the phone as shown in
> > > irdadump. But i cannot connect with gnokii.
> >
> > Try the irport module. If it doesn't work we'll investigate it
> > further.
> 
> Thomas
> -- 
> God said: tar xvzf universe.tar.gz - and the Universe was!
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/gnokii-users
> 

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup





reply via email to

[Prev in Thread] Current Thread [Next in Thread]