[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Bluetooth and 6310
From: |
Pawel Kot |
Subject: |
Re: Bluetooth and 6310 |
Date: |
Thu, 17 Apr 2003 16:03:23 +0200 |
>>> address@hidden 17 April 2003 15:51:54 >>>
> At this point you are ready to go with the Bluetooth phonet
protocol.
> You should modify the fbus-phonet.c to also support the Bluetooth
> version of it. Before closing the RFCOMM socket it is a good idea to
> wait 2 seconds. If you don't do this, the phone didn't let you
connect
> again until you reset it.
Please, be more specific. When exactly we should wait for 2 seconds?
After doing what?
> I think the config file entries "rfcomm_cn" and "bt_address" are not
> really needed. You should remove them and this will also remove your
> problem in data.h.
>
> If people want to connect over Bluetooth they should place the
Bluetooth
> device address in the config entry "port" and set the connection type
to
> "bluetooth". Depending on the value of "model" the link layer and
RFCOMM
> channel are selected. For "AT" and the "Nokia 6210" you use channel
1
> and for all other "Nokia abcd" phones you use channel 14 with
Bluetooth
> phonet protocol.
Is there no possibility for other phones to use other channel then 1?
pkot
- Bluetooth and 6310, Marcel Holtmann, 2003/04/16
- Re: Bluetooth and 6310,
Pawel Kot <=
- Re: Bluetooth and 6310, Pawel Kot, 2003/04/22
- Re: Bluetooth and 6310, Pawel Kot, 2003/04/22
- Re: Bluetooth and 6310, Peter Robinson, 2003/04/22
- Re: Bluetooth and 6310, tapio laxström, 2003/04/22
- Re: Bluetooth and 6310, Peter Robinson, 2003/04/22
- Re: Bluetooth and 6310, Matthew Johnson, 2003/04/22
- Re: Bluetooth and 6310, Timothy Murphy, 2003/04/22
- Re: Bluetooth and 6310, Marcel Holtmann, 2003/04/22