Re: returns 0 on failure to communicate to phone!!

[JPiper]

If someone wouldbe good enough to just tell me if their gnokii exhibits the same behaviour..? (just unplug the phone) btw I am using the sid source rebuilt for woody if that makes a difference..(?)

James Piper

address@hidden Sent by: address@hidden 26/05/2003 16:36 Please respond to "Discussion forum for gnokii users."

To:        address@hidden         cc:                 Subject:        returns 0 on failure to communicate to phone!!

Hi, 

I have just upgraded to gnokii version 0.5.0 from a modified 0.3.5. As part of the testing I do I pulled out the serial cable from the computer to check that gnokii returns and error in this instance- and I was shocked to find that it didn't. Both getsms and sendsms fail with return 0 and no output to stdout (without debug on of course), so I am not able to determine where the bug is. Here is the output with debugging output on.... Any clues..? 

spy:/tmp/gnokii# gnokii --getsms SM 1 15 -d 
GNOKII Version 0.5.0 
cfg_file_read - open /root/.gnokiirc: No such file or directory 
Opened configuration file /etc/gnokiirc 
Added new section global 
Adding key/value port//dev/ttyS1 
Adding key/value model/6110 
Adding key/value initlength/default 
Adding key/value connection/serial 
Adding key/value bindir//usr/sbin/ 
Adding key/value use_locking/yes 
Adding key/value serial_baudrate/19200 
Added new section connect_script 
Adding key/value TELEPHONE/12345678 
Added new section disconnect_script 
Added new section sms 
Adding key/value timeout/120 
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it.. 
phone instance config: 
model: 6110 
port_device: /dev/ttyS1 
connection_type: 0 
init_length: 0 
serial_baudrate: 19200 
serial_write_usleep: -1 
hardware_handshake: 0 
require_dcd: 0 
smsc_timeout: 1200 
connect_script: 
disconnect_script: 
Serial device: opening device /dev/ttyS1 
Serial device: setting speed to 115200 
Serial device: setting RTS to low and DTR to high 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
SM_Block Retry - 0 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
SM_Block Retry - 1 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
SM_Block Retry - 0 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
SM_Block Retry - 1 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
SM_Block Retry - 0 
Message sent: 0x40 / 0x0004 
00 01 64 01                                     |   d 
spy:/tmp/gnokii# echo $? 
0 

Any help would be appreciated.. ;) 

Cheers, James._______________________________________________
gnokii-users mailing list
address@hidden
http://mail.nongnu.org/mailman/listinfo/gnokii-users