Nokia 6210 via IrDa problem

[Bohdan Linda]

Hi,

Firwstly I'm IrDA newbie. I'm using GNOKII Version 0.5.0 and want use 
6210 via IrDA. I have Toshiba staellite with that SMC superchip.
Anyway

lsmod:

ircomm-tty             22272   0  (autoclean)
ircomm                  8620   0  (autoclean) [ircomm-tty]
smc-ircc                7398   1
irport                  5352   1  [smc-ircc]
irda                   94716   0  [ircomm-tty ircomm smc-ircc irport]
---------------------

my irda.conf looks like:

#irda.conf Version: 1.0
IRDADEV=irda0
#DONGLE= # specify dongle type
DISCOVERY=-s
ENABLE=yes # if you do not need to start irattach, set "no"
-------------

my .gnokiirc looks
port = /dev/ircomm0
#port = /dev/ttyS1
model = 6210
connection = irda
------------------

/dev/ttyS0, UART: unknown, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3

irda port is:
found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
SMC IrDA Controller found
 IrCC version 2.0, firport 0x130, sirport 0x3f8 dma=3, irq=3
IrDA: Registered device irda0
spurious 8259A interrupt: IRQ7.
----------------

irdadump:
08:29:17.276177 xid:cmd 9918335c > ffffffff S=6 s=0 (14)
08:29:17.366169 xid:cmd 9918335c > ffffffff S=6 s=1 (14)
08:29:17.456170 xid:cmd 9918335c > ffffffff S=6 s=2 (14)
08:29:17.546173 xid:cmd 9918335c > ffffffff S=6 s=3 (14)
08:29:17.636181 xid:cmd 9918335c > ffffffff S=6 s=4 (14)
08:29:17.726176 xid:cmd 9918335c > ffffffff S=6 s=5 (14)
08:29:17.809361 xid:rsp 9918335c < a2110000 S=6 s=5 Nokia 6210 hint=b125 
[ PnP Modem Fax Telephony IrCOMM IrOBEX ] (27)


------------------
cat /proc/net/irda/discovery:
IrLMP: Discovery log:

nickname: Nokia 6210, hint: 0xb125, saddr: 0x9918335c, daddr: 0x9e640000


-------------------
minicom /dev/ircomm0:
AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
OK
AT
OK

--------------------
gnokii --monitor
GNOKII Version 0.5.0
Orphaned line: port = /dev/ircomm0
Orphaned line: model = 6210
Orphaned line: connection = irda
Gnokii serial_open:tcgetattr: Input/output error
Couldn't open FBUS device: Input/output error
Telephone interface init failed: Function not supported by the phone 
Quitting.


Thanx for any help,
Bohdan Linda