Re: sending sms with sx1 failed

[Bernd Borne]

Thanks, but the siemens sx1 is a symbian phone with a reduced at command set.
I tried  'model = AT' an get following as axpected

GNOKII Version 0.6.4
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..00:01:E3:3B:85:8A is stale. Overriding it..
phone instance config:
model: AT
port_device: 00:01:E3:3B:85:8A
connection_type: 5
init_length: 0
serial_baudrate: 115200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 13
Initializing AT capable mobile phone ...
Serial device: opening device 00:01:E3:3B:85:8A
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
write: [AT+CGMM<cr>]
Initialization failed (11)
Telephone interface init failed: Command timed out.
Quitting.


On Saturday 01 January 2005 17:04, Pawel Kot wrote:
> On Sat, 1 Jan 2005, Bernd Borne wrote:
> > sending an sms with my siemens sx1 failed.
> >
> > echo "this is a test"|gnokii --sendsms +491701234567 --smsc +491710760000
> >
> > GNOKII Version 0.6.4
> > LOG: debug mask is 0x1
> > phone instance config:
> > model: series60
>
> What about trying to set 'model = AT'?
>
> take care,
> pkot