[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Urgent 5110 Hardware

From: Florin Vancea
Subject: Re: Urgent 5110 Hardware
Date: Wed, 5 Jan 2005 16:50:03 +0200

Just out of curiosity:

Karthik, can you tell the signal strength you are seeing in your
configuration? (through data connection, of course, since you have no LCD)

----- Original Message ----- 
From: "Joao Carneiro - DLS" <address@hidden>
To: "karthi keyan" <address@hidden>; "Discussion forum for gnokii
users." <address@hidden>
Sent: Wednesday, January 05, 2005 4:35 PM
Subject: RE: Urgent 5110 Hardware

-->> Probably this is not the adequate place to discuss such matters, if
anybody has a problem with it please say so.

1º - you are using a single wire? where did you hooked it up? to the main
antenna contact or to the back connector?
2º - the lenght of the wire should be of a determinate size, according to
the wavelength of the signal.
3º - There is also the problem of the impedance of the antenna and the
impedance of the antenna outlet on the phone.

I believe that all of these together should be the cause of your problems.
Bad antenna coupling and Bad antenna. You should have heavy SWR and heavy
loss at the antenna for that purpose.

Hope that i have been useful.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]