Re: 6670 almost there with gnapplet

[Matt Kay]

Found where to turn on debugging. Here's the output from gnokii
--identify:

address@hidden:~$ gnokii --identify
GNOKII Version 0.6.4
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: series60
port_device: 00:E0:03:5F:5F:6D
connection_type: 5
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 14
Serial device: opening device 00:E0:03:5F:5F:6D
Message sent: 0x01 / 0x0002
00 01                                           |
Message received: 0x05 / 0x005e
00 02 00 00 00 2c 00 73 00 77 00 20 00 76 00 65 |      , s w   v e
00 72 00 73 00 69 00 6f 00 6e 00 3a 00 0a 00 56 |  r s i o n :   V
00 20 00 34 00 2e 00 30 00 34 00 33 00 37 00 2e |    4 . 0 4 3 7 .
00 34 00 0a 00 31 00 35 00 2d 00 30 00 39 00 2d |  4   1 5 - 0 9 -
00 30 00 34 00 0a 00 52 00 48 00 2d 00 36 00 37 |  0 4   R H - 6 7
00 0a 00 28 00 63 00 29 00 4e 00 4d 00 50       |    ( c ) N M P
Received message type 05
PHONE: sw version:
V 4.0437.4
15-09-04
RH-67
(c)NMP
Unsolicited frame, skipping...
Message received: 0x01 / 0x005a
00 02 00 00 00 00 00 0b 00 05 00 4e 00 4f 00 4b |            N O K
00 49 00 41 00 05 00 52 00 48 00 2d 00 36 00 37 |  I A   R H - 6 7
00 0f 00 33 00 35 00 35 00 30 00 32 00 33 00 30 |    3 5 5 0 2 3 0
00 30 00 30 00 37 00 34 00 31 00 31 00 34 00 33 |  0 0 7 4 1 1 4 3
00 08 00 34 00 2e 00 30 00 34 00 33 00 37 00 2e |    4 . 0 4 3 7 .
00 34 00 03 00 32 00 35 00 36                   |  4   2 5 6
Received message type 01
gnapplet version: 0.11, gnokii driver: 0.16
Telephone interface init failed: Problem occured internal to model specific 
code.
Quitting.