gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: How to detect Incoming Calls FBUS 6210?


From: Andy Shaw
Subject: RE: How to detect Incoming Calls FBUS 6210?
Date: Fri, 29 Apr 2005 15:18:13 +0100

Hi Antonio,
That would be much appreciated.
I have tried using the set cell broadcast as suggested in other reading but
I can't seem to get any response
to the message.

many thanks
Andy

-----Original Message-----
From: address@hidden
[mailto:address@hidden Behalf Of
Antonio Marcos Ferreira Soares
Sent: 29 April 2005 15:09
To: Discussion forum for gnokii users.
Cc: address@hidden
Subject: Re: How to detect Incoming Calls FBUS 6210?


I haven't work with 6210, but I had done it with 3280/6180/6120/5120
using MBUS and "carkit" features(commands).
There are some documentation about it in 6110 documentation that you can
find in gnokii site.
I will try to find the code and send to you.

Amfs



Andy Shaw wrote:

>kathir <kathir4 <at> sancharnet.in> writes:
>
>
>
>>helloo i developed with 5110
>>
>>-----Original Message-----
>>From: gnokii-users-bounces+kathir4=sancharnet.in <at> nongnu.org
>>[mailto:gnokii-users-bounces+kathir4=sancharnet.in <at> nongnu.org]On
Behalf
>>Of Andy Shaw
>>Sent: Friday, April 22, 2005 7:18 PM
>>To: gnokii-users <at> nongnu.org
>>Subject: How to detect Incoming Calls FBUS 6210?
>>
>>I am developing a pic based application that uses FBUS to communicate with
a
>>6210.
>>What I can't workout is how to detect incoming call alerts.
>>I am expecting to recieve an incoming call alert from the phone but see
>>nothing.
>>
>>Do I need to set up the phone to issue fbus alerts ?
>>If so, does anyone know what I need to send.
>>
>>Any help would be much appreciated.
>>
>>thanks
>>Andy
>>
>>_______________________________________________
>>gnokii-users mailing list
>>gnokii-users <at> nongnu.org
>>http://lists.nongnu.org/mailman/listinfo/gnokii-users
>>
>>
>>
>
>
>I believe the 5110 code is different. How do you detect incoming calls ?
>
>I am using Gnokii version 0.6.3 for windows, which I believe to be the
latest.
>Are the protocol docs more recent and updated elsewhere ?
>
>I read an article that said I needed to set the cell broadcast but this
doesnt
>work either.
>
>I'd be grateful for any pointers.
>Andy
>
>
>
>
>_______________________________________________
>gnokii-users mailing list
>address@hidden
>http://lists.nongnu.org/mailman/listinfo/gnokii-users
>
>
>
>


_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users





reply via email to

[Prev in Thread] Current Thread [Next in Thread]