[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: internet config+nokia 3220+DKU-5 cable

From: Martin Topping
Subject: Re: internet config+nokia 3220+DKU-5 cable
Date: Sat, 10 Jun 2006 19:37:51 +0100

On 10/06/06, navaladi a <address@hidden> wrote:
Hi all,I am running Debian 3.1 using ubuntu kernel.I mean my debian
has 2.6.8....But Ubuntu 5.1 has my Intel High Def. audio
is dectected by ubuntu kernel Only...
Okey come to my actuall question...

I want to get internet connection through my mobile phone(Nokia 3220)
with Data cable DKU-5.The actuall drivers for my data cable are loaded
itself..They are "usbserial" and "pl2303" These loaded by auto
My Airtel phone is GPRS activated.I am using "gnome-ppp" and wvdial"
But airtel is not using any authendications i mean no username no passwd...
so wvdial always looks for username and passwd..So i guess a my name
as a username also passwd...i know the phone number of airtel is
And then i ran a goes and initialized and Wating for a
carrier signal..
it prints an random numbers ...and tells me that carrier failed.

The device created is /dev/ttyUSB0.I linked to /dev/modem..

#ln -s /dev/ttyUSB0 /dev/modem

The two drivers is enough for browsing internet?
Should i need any PC-Suite?
I also tryied kppp which hangs on connecting..?
kppp's query modem is perpectly tells me the modem type and everything...

AFAIK mobile is detected well..and trying..
The airtel customer Care people is not aware of  Linux Config..
me also searched in net..

My BAD luck is...My DKU-5 Cable driver is not loaded by nokia PC-Suite
6.8 in WINDOWS XP SP2.

i think my question is clear.thx pls help.

Hi, I use wvdial to use my 3220 as a modem.  My wvdial.conf file is below:

[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 230400
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = *99#
Username = A
Password = B
Stupid Mode = 1

I'm on Orange Uk.  For Orange GPRS you don't need a username or
password.  But notice in the file I have to put Username = A and
Password = B, if I left it blank it wouldn't work.  Also must have
Stupid Mode = 1 or it won't connect.

Hope this helps!!


gnokii-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]