[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Support of Motorola RazrV3i

From: Jancs
Subject: Re: Support of Motorola RazrV3i
Date: Mon, 19 Jun 2006 23:15:05 +0300
User-agent: Internet Messaging Program (IMP) 3.2.8

Citēju Pawel Kot <address@hidden>:

> Hi,
> On 6/12/06, Jānis <address@hidden> wrote:
> > Can anyone give a hint how to make gnokii communicating with Motorola
> RazrV3i?
> >
> > When it tries to connect to /dev/ttyACM0, it gets "permission denied", even
> if
> > tried as the root user and even if the permissions to /dev/ttyACM0 are set
> to
> > 777
> Please show your gnokii config. You might look also at strace output
> to see where it fails.

here is conf:
port = /dev/ttyACM0
model = AT
initlength = default
connection = serial
use_locking = no
serial_baudrate = 19200
handshake = software
smsc_timeout = 10
bindir = /usr/sbin/
TELEPHONE = "my_phone_number"
debug = on
rlpdebug = off
xdebug = off

and here is the response:

GNOKII Version 0.6.10
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: /dev/ttyACM0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Gnokii serial_open: open: Permission denied
Couldn't open ATBUS device: Permission denied
AT bus initialization failed (1)
Initialization failed (1)
Telephone interface init failed: Command failed.

all this is happening on SUSE 10.1 x86-64, KDE 3.5.1 (i am beginner with SUSE so
i see little possibility to change anything here)

reply via email to

[Prev in Thread] Current Thread [Next in Thread]